• Title/Summary/Keyword: Seabed image

Search Result 41, Processing Time 0.044 seconds

Detection of Seabed Rock Using Airborne Bathymetric Lidar and Hyperspectral Data in the East Sea Coastal Area

  • Shin, Myoung Sig;Shin, Jung Il;Park, In Sun;Suh, Yong Cheol
    • Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
    • /
    • v.34 no.2
    • /
    • pp.143-151
    • /
    • 2016
  • The distribution of seabed rock in the coastal area is relevant to navigation safety and development of ocean resources where it is an essential hydrographic measurement. Currently, the distribution of seabed rock relies on interpretations of water depth data or point based bottom materials survey methods, which have low efficiency. This study uses the airborne bathymetric Lidar data and the hyperspectral image to detect seabed rock in the coastal area of the East Sea. Airborne bathymetric Lidar data detected seabed rocks with texture information that provided 88% accuracy and 24% commission error. Using the airborne hyperspectral image, a classification result of rock and sand gave 79% accuracy, 11% commission error and 7% omission error. The texture data and hyperspectral image were fused to overcome the limitations of individual data. The classification result using fused data showed an improved result with 96% accuracy, 6% commission error and 1% omission error.

Method of Correcting Hyperspectral Image for Seabed Material Analysis of Coastal Area (연안 해저 재질 분석을 위한 초분광영상의 보정 방법)

  • SHIN, Myung-Sik;SHIN, Jung-Il;KIM, Ik-Jae;SUH, Yong-Cheol
    • Journal of the Korean Association of Geographic Information Studies
    • /
    • v.19 no.2
    • /
    • pp.107-116
    • /
    • 2016
  • Airborne or spaceborne remote sensing can increase the efficiency of seabed material surveys compared with field surveying using a vessel. For the same seabed material, the optical remote sensing image shows variation in the reflectance depending on the water depth, which is due to the absorption and scattering by the water column. This study suggests a correction procedure to use the hyperspectral image for seabed material analysis. The study is conducted in the coastal area from Sacheonjin Port to Gyungpo Beach in Gangwon-do. The hyperspectral image is acquired using the CASI-1500 sensor. The diffuse attenuation coefficient is estimated for each band through regression models between the water reflectance and depth. Then, the coefficient is applied to each band of the image. As a result, the completely corrected image can be interpreted for a deeper area, although the interpretable area is very shallow without water column correction. Additionally, the water column corrected image shows decreased variation of reflectance with various water depths.

Study on Exploration Method of Seabed Around Heuksando Using Hover Drones (수면호버링 드론을 이용한 흑산도 해저지형 탐사 기법 연구)

  • Kim, Hyeong-Gyun;Lee, Young-suk
    • Journal of Korea Multimedia Society
    • /
    • v.23 no.1
    • /
    • pp.102-110
    • /
    • 2020
  • This study covers exploration of seabed around Heuksando Island using hover drones. To do so, we inspected the terrain of the island and set autonomous flight waypoints on each area of the island's shores. Next, we designated seabed scan radius for drones. Then the drones fitted with laser sensor hover autonomously on their assigned area and acquire seabed data. Finally, we match the seabed data on all areas according to GPS. Our final goal is to make immersive VR maritime cultural map based on 『Jasan Urbo』.

Research on Development of Side Scan Sonar using multi-beam Sensors (멀티빔 센서를 이용한 사이드 스캔 소나 개발에 관한 연구)

  • 장유신;계중읍;구융서;박승수;김지한;이만형
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2004.10a
    • /
    • pp.696-699
    • /
    • 2004
  • A side scan sonar system uses the towfish installed sonars, It is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to fined objects and investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

  • PDF

Study on Development of Side Scan Sonar Using Multi-beam Sensors (다중 빔 센서를 이용한 측면주사음탐기에 관한 연구)

  • Chang, Y.S.;Keh, J.E.;Park, S.S.;Lee, M.H.
    • Proceedings of the Korean Society of Marine Engineers Conference
    • /
    • 2006.06a
    • /
    • pp.317-318
    • /
    • 2006
  • The towfish oi a side scan sonar is an equipment that search images of the bottom surface of the sea in real time. It is a typical equipment that is related to a sea investigation such as a geological survey, seabed communication cable and power line cable placing repair investigation, fish breeding ground investigation, sea purification, relic and mineral investigation, and mine and submarine search. It used to find objects and Investigate on the seabed surface. But, recently, it is used to sea purification and geological survey that require information of the correct surface of the seabed. So, it needs various filtering technique and image processing techniques development to acquire high resolution image. Therefore, this research develops a side scan sonar using multi-beam sensors that supply various information with the fast scan speed and correct high resolution that is not a simple underwater investigation equipment.

  • PDF

Study on Seabed Mapping using Two Sonar Devices for AUV Application (복수의 수중 소나를 활용한 수중 로봇의 3차원 지형 맵핑에 관한 연구)

  • Joe, Hangil;Yu, Son-Cheol
    • The Journal of Korea Robotics Society
    • /
    • v.16 no.2
    • /
    • pp.94-102
    • /
    • 2021
  • This study addresses a method for 3D reconstruction using acoustic data with heterogeneous sonar devices: Forward-Looking Multibeam Sonar (FLMS) and Profiling Sonar (PS). The challenges in sonar image processing are perceptual ambiguity, the loss of elevation information, and low signal to noise ratio, which are caused by the ranging and intensity-based image generation mechanism of sonars. The conventional approaches utilize additional constraints such as Lambertian reflection and redundant data at various positions, but they are vulnerable to environmental conditions. Our approach is to use two sonars that have a complementary data type. Typically, the sonars provide reliable information in the horizontal but, the loss of elevation information degrades the quality of data in the vertical. To overcome the characteristic of sonar devices, we adopt the crossed installation in such a way that the PS is laid down on its side and mounted on the top of FLMS. From the installation, FLMS scans horizontal information and PS obtains a vertical profile of the front area of AUV. For the fusion of the two sonar data, we propose the probabilistic approach. A likelihood map using geometric constraints between two sonar devices is built and a monte-carlo experiment using a derived model is conducted to extract 3D points. To verify the proposed method, we conducted a simulation and field test. As a result, a consistent seabed map was obtained. This method can be utilized for 3D seabed mapping with an AUV.

Classification of Seabed Physiognomy Based on Side Scan Sonar Images

  • Sun, Ning;Shim, Tae-Bo
    • The Journal of the Acoustical Society of Korea
    • /
    • v.26 no.3E
    • /
    • pp.104-110
    • /
    • 2007
  • As the exploration of the seabed is extended ever further, automated recognition and classification of sonar images become increasingly important. However, most of the methods ignore the directional information and its effect on the image textures produced. To deal with this problem, we apply 2D Gabor filters to extract the features of sonar images. The filters are designed with constrained parameters to reduce the complexity and to improve the calculation efficiency. Meanwhile, at each orientation, the optimal Gabor filter parameters will be selected with the help of bandwidth parameters based on the Fisher criterion. This method can overcome some disadvantages of the traditional approaches of extracting texture features, and improve the recognition rate effectively.

Removal of Seabed Multiples in Seismic Reflection Data using Machine Learning (머신러닝을 이용한 탄성파 반사법 자료의 해저면 겹반사 제거)

  • Nam, Ho-Soo;Lim, Bo-Sung;Kweon, Il-Ryong;Kim, Ji-Soo
    • Geophysics and Geophysical Exploration
    • /
    • v.23 no.3
    • /
    • pp.168-177
    • /
    • 2020
  • Seabed multiple reflections (seabed multiples) are the main cause of misinterpretations of primary reflections in both shot gathers and stack sections. Accordingly, seabed multiples need to be suppressed throughout data processing. Conventional model-driven methods, such as prediction-error deconvolution, Radon filtering, and data-driven methods, such as the surface-related multiple elimination technique, have been used to attenuate multiple reflections. However, the vast majority of processing workflows require time-consuming steps when testing and selecting the processing parameters in addition to computational power and skilled data-processing techniques. To attenuate seabed multiples in seismic reflection data, input gathers with seabed multiples and label gathers without seabed multiples were generated via numerical modeling using the Marmousi2 velocity structure. The training data consisted of normal-moveout-corrected common midpoint gathers fed into a U-Net neural network. The well-trained model was found to effectively attenuate the seabed multiples according to the image similarity between the prediction result and the target data, and demonstrated good applicability to field data.

Correction of Nodule Abundance Using Image Analysis Technique on Manganese Nodule Deposits (영상처리 기법에 의한 심해저 망간단괴의 부존밀도 보정)

  • Park, Chan-Young;Chon, Hyo-Taek;Kang, Jung-Keuk
    • Economic and Environmental Geology
    • /
    • v.29 no.4
    • /
    • pp.429-437
    • /
    • 1996
  • The purpose of this study is to correct the nodule abundance of FFG (Free Fall Grab) sampler on KODOS (Korea Deep Ocean Study) area in North-East Pacific Ocean. The image analysis of sea-floor photography was carried out for correcting the abundance of nodules, and the image enhancement techniques and edge detection method were used to discriminate between nodules and sediments. The trace of nodules on sediments was detected to reduce the fractionation effect in calculating the coverage of nodules. The three methods, using the coverage of nodules, using the volume density, and using corrected volume density, were utilized for the correction of the nodule abundance. The method using the coverage of nodules was more convenient and available for the correction of nodule abundance than the other two methods. The method using the corrected volume density had the highest confidence level compared with the other methods.

  • PDF

Development of Algorithms for Correcting and Mapping High-Resolution Side Scan Sonar Imagery (고해상도 사이드 스캔 소나 영상의 보정 및 매핑 알고리즘의 개발)

  • 이동진;박요섭;김학일
    • Korean Journal of Remote Sensing
    • /
    • v.17 no.1
    • /
    • pp.45-56
    • /
    • 2001
  • To acquire seabed information, the mosaic images of the seabed were generated using Side Scan Sonar. Short time energy function which is needed for slant range correction is proposed to get the height of Tow-Fish to the reflected acoustic amplitudes of each ping, and that leads to a mosaic image without water column. While generating mosaic image, maximum value, last value and average value are used for the measure of a pixel in the mosaic image and 3-D information was kept by using acoustic amplitudes which were heading for specific direction. As a generating method of mosaic image, low resolution mosaic image which is over 1m/pixel resolution was generated for whole survey area first, and then high resolution mosaic image which is generated under 0.1m/pixel resolution was generated for the selected area. Rocks, ripple mark, sand wave, tidal flat and artificial fish reef are found in the mosaic image.