• 한국시뮬레이션학회:학술대회논문집
• /
• 한국시뮬레이션학회 1995년도 추계학술발표회 및 정기총회
• /
• pp.0-0
• /
• 1995

Simulation tools are widely used for performance evaluation of newly proposed systems. However, many industrial simulation projects fail to attain the original goals ,especially when very complicated decision logics of the experienced operatorsare needed to be modeled. We propose a technique to overcome the oabstacles. In the proposed technique, complicated decision logics are not directly modeled but an interface for interactive input is provided in the model. While running the simulation model in concurrent animation mode, whenever operator's decisions are needed an interfce screen is displayed for operator's decisions. The operator then makes decisions using the information which is provided by the animation proces itself. This technique was successfully applied to an industrial simulation projects in which alternatives were evaluated for increasingthe color lot size of car print shop.

• 한국CDE학회논문집
• /
• 제3권1호
• /
• pp.22-30
• /
• 1998

The deflection yoke (DY) controls the direction of the electron beam that falls on the screen of the television monitor. Its quality depends on the shape and density of coils wound around the DY coil separator. Winding frames are used to make these coils, and therefore, their shapes are essential in making quality coils. A reverse engineering(RE) is applied to create the 3D model of the winding frame. It considerably shortens the design verification time and shows the level of accuracy that is feasible in the production mode. The paper explains each step of the reverse engineering process in detail.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.279-282
• /
• 2005

Recently, due to the launching of digital broadcasting service, a demand of PDP TV with large screen size is sharply rising. PDP power module is mainly divided into power factor correction (PFC) stage and sustaining power stage. Especially, sustaining power module has pulsating load characteristics. So, the hard switching at light load condition causes low efficiency and thermal problem. Therefore, a new power conversion circuit for sustaining power module of 60' PDP is proposed whose ZVS is obtained by additional ZVS tank. This paper presents properties of the proposed converter through mode analysis, numerical analysis. And a 900w prototype for sustaining power module of 60' PDP is produced to verify the analytic results. As an experimental results, ZVS is achieved from full load to 10% load variation and more than 92% of high efficiency is obtained at 10% load condition.

• 한국방송∙미디어공학회:학술대회논문집
• /
• 한국방송공학회 2015년도 추계학술대회
• /
• pp.143-144
• /
• 2015

최신 동영상 표준 코덱인 High Efficiency Video Coding (HEVC)는 기존의 H.264/AVC 보다 동일 화질 대비 최대 약 2배의 압축 성능을 보여준다. 이러한 성능을 얻기 위해 HEVC에는 다양한 압축 기술이 적용되었다. 그 예로, H.264/AVC에서는 인트라 예측 모드에서 9가지 예측 모드만을 사용한 반면 HEVC에서는 35가지의 모드를 이용해 화면 내 예측을 시행한다. HEVC에 적용된 다양한 기술들에 의해 부호화 복잡도가 증가하였고 복잡도를 줄이기 위해 다양한 고속 알고리즘이 연구되고 있다. 본 논문에서는 스크린 콘텐츠 영상 부호화에 적합한 고속 인트라 예측 알고리즘을 제안한다. 스크린 콘텐츠 영상이란 카메라를 이용해 촬영된 자연계 영상이 아닌 mobile phone, 방송 장비, 기타 전자 기기 등 컴퓨터 기술에 의해 생성되는 영상을 의미한다. 스크린 컨텐츠 영상은 자연계 영상과 달리 색의 변화가 전혀 없는 단순한 영역을 갖는 특성이 있다. 이러한 스크린 콘텐츠 영상의 특성을 반영하는 고속 알고리즘을 HEVC Test Model (HM) 16.6에 적용하였고, 스크린 컨텐츠 영상에서 25%의 속도 향상 결과를 얻을 수 있었다.

• 한국게임학회 논문지
• /
• 제21권3호
• /
• pp.147-156
• /
• 2021

In this paper, we planned to see the positive effects of the immersive virtual environment. In particular, the positive effect of presence on physical performance was explored. A total of 25 participants were recruited for this experiment and his/her physical performance was measured by Electromyography (EMG) while they were exercising (rowing), and presence was measured by a self-reported measure. The participants were randomly assigned to experience either a) Virtual Reality (VR) or b) non-VR (2D screen) condition when they played the exergame. The result showed that 1) there was a positive relationship between representation mode and presence and 2) the higher level of presence reinforced the user's physical performance. The limitation of the study and future study were also discussed.

• 한국전기전자재료학회논문지
• /
• 제30권5호
• /
• pp.263-269
• /
• 2017

A piezoelectric cantilever energy harvester (PCEH) driven in longitudinal (3-3) vibration mode was fabricated, and its electrical properties were evaluated by varying the resistive load. A commercial PZT piezoelectric ceramic with a high piezoelectric charge constant ($d_{33}$) of 520 pC/N and the interdigitated (IDT) electrode pattern was used to fabricate the PCEH driven in longitudinal vibration. The IDT Ag electrode embedded piezoelectric laminates were co-fired at $850^{\circ}C$ for 2 h. The 3-3 mode PCEH was successfully fabricated by attaching the piezoelectric laminates to a SUS304 elastic substrate. The PCEH exhibited a high output power of 3.8 mW across the resistive load of $100k{\Omega}$ at 100 Hz and 1.5 G. This corresponds to a power density of $10.3mW/cm^3$ and a normalized global power factor of $4.56mW/g^2{\cdot}cm^3$. Given the other PCEH driven in transverse (3-1) vibration mode, the 3-3 mode PCEH could be better for vibration energy harvesting applications.

• 한국마이크로전자및패키징학회:학술대회논문집
• /
• 한국마이크로전자및패키징학회 2005년도 ISMP
• /
• pp.201-212
• /
• 2005

[ $Epoxy/BaTiO_3$ ] composite embedded capacitor films (ECFs) were newly designed fur high dielectric constant and low tolerance (less than ${\pm}15\%$) embedded capacitor fabrication for organic substrates. In terms of material formulation, ECFs are composed of specially formulated epoxy resin and latent curing agent, and in terms of coating process, a comma roll coating method is used for uniform film thickness in large area. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ composite ECF is measured with MIM capacitor at 100 kHz using LCR meter. Dielectric constant of $BaTiO_3$ ECF is bigger than that of $SrTiO_3$ ECF, and it is due to difference of permittivity of $BaTiO_3\;and\;SrTiO_3$ particles. Dielectric constant of $BaTiO_3\;&\;SrTiO_3$ ECF in high frequency range $(0.5\~10GHz)$ is measured using cavity resonance method. In order to estimate dielectric constant, the reflection coefficient is measured with a network analyzer. Dielectric constant is calculated by observing the frequencies of the resonant cavity modes. About both powders, calculated dielectric constants in this frequency range are about 3/4 of the dielectric constants at 1 MHz. This difference is due to the decrease of the dielectric constant of epoxy matrix. For $BaTiO_3$ ECF, there is the dielectric relaxation at $5\~9GHz$. It is due to changing of polarization mode of $BaTiO_3$ powder. In the case of $SrTiO_3$ ECF, there is no relaxation up to 10GHz. Alternative material for embedded capacitor fabrication is $epoxy/BaTiO_3$ composite embedded capacitor paste (ECP). It uses similar materials formulation like ECF and a screen printing method for film coating. The screen printing method has the advantage of forming capacitor partially in desired part. But the screen printing makes surface irregularity during mask peel-off, Surface flatness is significantly improved by adding some additives and by applying pressure during curing. As a result, dielectric layer with improved thickness uniformity is successfully demonstrated. Using $epoxy/BaTiO_3$ composite ECP, dielectric constant of 63 and specific capacitance of 5.1nF/cm2 were achieved.

• 한국실내디자인학회논문집
• /
• 제26권1호
• /
• pp.33-42
• /
• 2017

Interior design especially the design developments for commercial spaces should ensure the economy of spaces. This is the marketing for space. It is necessary to understand the design elements of commercial space for the efficient using of digital media of space marketing. In this research decided to design application schemes for shopping mall by searching fashion shopping behaviors of users with persona-base scenario approach. Collected the information of users behavior base on case analysis of advance research to make personas. And develop scenario base personas for knowing the needs of users. And then made 4 schemes as the solution. Scheme 1. Customers can get the information and communication with the staff through with media screen in one room of shopping mall. The data of customers can be recorded for providing information or product recommendation personality. Forecast to preferred by group trip or customers that don't like walking around in shopping mall. Scheme 2. Install a media screen at entrance of a store in shopping mall and show special effect to raise customers' attention who walk through from the front of the store. Through with this customers will stay for long time and raise curiosity to get in the store. And the media screen also provide information of store and products. Scheme 3. Customers can get the information of products with using smart phone to scan QR cord in labels of products and record. Customers can finish whole shopping behaviors without the help of store staff. And can make buying decision even have left shopping mall as a online mode. Scheme 4. Store managers can record the products and the environment of store with 360 camera and update to website. Then customers can browse the virtual space with VR glasses. That make customers can have the real shopping experience without being in the store. In this study, have presented schemes of digital media in commercial space. But there are various of commercial space. In this study was presented schemes for shopping mall by searching fashion shopping behaviors of users. And look forward the researches about specific space setting and other type of commercial space for space development.

• Bulletin of the Korean Chemical Society
• /
• 제21권10호
• /
• pp.1041-1043
• /
• 2000

We present the effects of temperature (between 10 K and 298 K) and of hole concentration on the frequency and intensity of characteristic phonons in polycrystalline $La_2CuO_4-related$ compounds using FT-IR spectros-copy. The influences of the concentration of carrier doped on the phonon modes are prominent in the IR spectra of $La_2CuO_4-related$ compounds. For $La_2-xSrxCuO_4({\chi}=$ 0.00, 0.03, 0.07, 0.10, and 0.15) and electrochemically (or chemically) oxidized $La_2CuO_4$, the intensities of the transverse oxygen mode around 680cm $-^1$ which cor-responds mainly to Cu-O(1) stretching vibration in the basal plane of CuO6 octahedron, are decreased and dis-appeared depending on the Sr-substitution rate and the amount of excess oxygen, while the longitudinal oxygen mode around 510 cm $-^1$ corresponding to the Cu-O(2) stretching in the basal plane of CuO6 octahedron are near-ly invariable. In particular, after two cycles of cooling-heating between 10 K and 298 K for these sample, the phonons around 680 cm $-^1$ are blue shif 13-15 cm $-^1$, while the phonons around 510 cm $-^1$ are nearly constant. The introduction of the charge carrier by doping would give rise to the small contraction of CuO6 oc-tahedron as Cu $^3+$ requires a smaller site than Cu $^2+$, which results in the shortening of the Cu-O(1) bond length and Cu-O(2) bond length with the increased La-O(2) bond length. These results in the frequency shift of the characteristic phonons. The IR spectra of $La_2Li0.5Cu0.5O_4$ which exhibits an insulator behavior despite the $Cu^3+$ of nearly 100%, corroborate our IR interpretations. The mode around 710 cm $-^1$ corresponding to Cu-O(1) stretching vibration is still strongly remained even at low temperature (10 K). Thus, we conclude that the con-duction electrons formed within $CuO_2$ planes of $La_2CuO_4-related$ superconductors screen more effectively the transverse oxygen breathing mode around 680 $cm-^1$ depending on the concentration of the doped charge carrier in $La_2CuO_4-related$ compounds, which might use as a superconductivity probe.

• 예술인문사회 융합 멀티미디어 논문지
• /
• 제9권9호
• /
• pp.721-736
• /
• 2019

본 논문에서는 대심도에 위치한 지하역사(지하 6층) 및 터널에서 화재가 발생했을 경우 제연설비 작동에 따른 연기의 거동을 측정하였다. 열풍기를 이용하여 열부력 효과를 구현한 연기발생장치를 이용하여 화재연기를 생성하였다. 화재발생 위치는 승강장 위 및 스크린도어 외부에 위치한 터널부의 승강장 위의 2가지 위치를 선정하였다. 승강장 화재발생시 승강장에 설치된 환기구를 통하여 연기가 배출되도록 하는 제연모드가 일반적인데 본 연구에서는 승강장 양단에 위치한 터널부의 환기구를 통한 배기도 같이 동작되도록 설정하여 실험을 수행하였다. 다양한 위치에서 연기농도 및 풍향풍속을 측정하였고 화면을 취득하여 연기의 이동 및 제연을 분석하였다. 승강장 내부에서 화재가 발생하였을 경우와 선로부에서 화재가 발생하였을 경우 승강장의 송풍기의 제연모드 동작과 터널의 송풍기의 배연 동작으로 인하여 연기배출이 원활하였고 화재 발생 인근 구역으로의 연기전파가 억제되었다. 본 연구에서 제시한 승강장 및 승강장 양단부의 터널에 적용되는 송풍기를 같이 운전하는 제연모드를 통하여 승강장 화재 및 화재열차 정차시 화재 연기로부터 승객들에게 보다 안전한 대피환경을 제공할 수 있을 것이다.