• Bulletin of the Korean Chemical Society
• /
• v.35 no.10
• /
• pp.3081-3084
• /
• 2014

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2018.05a
• /
• pp.294-295
• /
• 2018

Nowadays, the construction industry utilizes 3D models in the designing process, on which research is being conducted to establish an automated system for project cost estimation in connection with information related to construction such as material unit costs and wages, beyond the level of design interference review and construction quantity estimation. In this process, the project cost is estimated in connection with unit price data after takeoff the quantity based on the 3D model attributes and data types. A way to reduce cost and risk would be first developing prototypes of some of essential buildings and works, comparing and validating the outcomes, and then extending to the whole scope, because estimates differ on the basis of the scope and level of 3D design models as well as the data accuracy. This study analyzes case studies of project cost estimation by computing the quantity on the basis of 3D model in the construction industry and explores methodologies and management measures applicable for estimating nuclear power plant construction project costs.

• Geomechanics and Engineering
• /
• v.11 no.3
• /
• pp.345-359
• /
• 2016

In order to investigate the influence of the interfacial angel on failure characteristics and mechanism of combined coal-rock mass, 35 uniaxial/biaxial compressive simulation tests with 5 different interfacial angels of combined coal-rock samples were conducted by PFC2D software. The following conclusions are drawn: (1) The compressive strength and cohesion decrease with the increase of interfacial angle, which is defined as the angle between structure plane and the exterior normal of maximum principal plane, while the changes of elastic modulus and internal friction angle are not obvious; (2) The impact energy index $K_E$ decreases with the increase of interfacial angle, and the slip failure of the interface can be predicted based on whether the number of acoustic emission (AE) hits has multiple peaks or not; (3) There are four typical failure patterns for combined coal-rock samples including I (V-shaped shear failure of coal), II (single-fracture shear failure of coal), III (shear failure of rock and coal), and IV (slip rupture of interface); and (4) A positive correlation between interfacial angle and interface effect is shown obviously, and the interfacial angle can be divided into weak-influencing scope ($0-15^{\circ}$), moderate-influencing scope ($15-45^{\circ}$), and strong-influencing scope (> $45^{\circ}$), respectively. However, the confining pressure has a certain constraint effect on the interface effect.

• Journal of KIBIM
• /
• v.3 no.2
• /
• pp.19-27
• /
• 2013

The application of the BIM for the KEPCO' new headquarters in Naju involved alternative approaches and accompanied many trials-and-errors as the project adopted new targets and purposes that were not used in Korea before. In particular, for a large BIM-based project, clearly defining the BIM-including the objective, scope and the outcome-is critical for a project owner. For a successful implementation, project owners should improve the utilization of the BIM. Against this background, this research examines the case of the BIM application for the KEPCO' new headquarters in Naju, identifies its effects and problems, and proposes how to improve application of the BIM for public projects. The improvement in the BIM application can be divided into several stages: project order, design development, construction, and post-construction maintenance. In the initial stage, it is important to fully discuss the project planning among participants, and clarify the goal, scope, expected outcomes and role of the BIM. In the design stage, the level of detail (LOD) for the 3D model should be defined in consideration of information use in the stages of estimation and construction. In the construction stage, the scope of project that is managed based on the processing and use of the BIM data should be clearly given and understood. After construction is complete, measures should be sought to use the BIM for maintenance, and corresponding requirements and outcomes should be provided. The analysis is expected to provide basic data for successful implementation of BIM-based public projects, by assisting project owners and involved parties in enhancing work in different stages of a project.

• Journal of Plant Biotechnology
• /
• v.46 no.3
• /
• pp.137-142
• /
• 2019

Gene edited crops can be classified as SDN-1, SDN-2 and SDN-3 group depending on their mutation's range and the usage of donor DNA. The SDN-1 and SDN-2 crops, in particular, could be developed as 100% transgene-free, which do not contain any DNA fragment of the vector or guide RNA used for gene editing such as CRISPR Cas9 system. Therefore, there are no scientific methods available for the detection of these crops and differentiation with the one produced by conventional cross breeding techniques. Additionally, it would be impossible to properly implement the existing GMO regulation law, in particular, the national legislation for "GMO labelling". In this regard, Australia has announced that SDN-1 crops will not be subjected to the existing GMO regulation. Furthermore, Argentina and Brazil have established a new policy that GE crops with no transgene (100% transgene-free crops) should be exempted from the scope of the GMO. In addition, Japan has also announced that "an organism that has no remnants of inserted nucleic acid processed extracellularly is not subjected to the Cartagena Act". It means that SDN-2 crops can also be exempted from the scope of GMO. In this trend, in South Korea, I suggested that gene edited crops with no remnants of inserted foreign DNA fragments should be excluded from the existing GMO regulation. Thus, I expect that diverse elite crop lines should be developed by using advanced gene editing technologies

• Smart Structures and Systems
• /
• v.22 no.3
• /
• pp.259-276
• /
• 2018

This paper studies the energies and energy release rate (ERR) for the initially rotationally symmetric compressed (or stretched) in the inward (outward) radial direction of the PZT/Elastic/PZT sandwich circular plate with interface penny-shaped cracks. The investigations are made by utilizing the so-called three-dimensional linearized field equations and relations of electro-elasticity for piezoelectric materials. The quantities related to the initial stress state are determined within the scope of the classical linear theory of piezoelectricity. Mathematical formulation of the corresponding problem and determination of the quantities related to the stress-strain state which appear as a result of the action of the uniformly normal additional opening forces acting on the penny-shaped crack's edges are made within the scope of the aforementioned three-dimensional linearized field equations solution which is obtained with the use of the FEM modelling. Numerical results of the energies and ERR and the influence of the problem parameters on these quantities are presented and discussed for the PZT- 5H/Al/PZT-5H, PZT-4/Al/PZT-4, $BaTiO_3/Al/BaTiO_3$ and PZT-5H/StPZT-5H sandwich plates. In particular, it is established that the magnitude of the influence of the piezoelectricity and initial loading on the ERR increases with crack radius length.

• Journal of Korean Library and Information Science Society
• /
• v.2
• /
• pp.1-21
• /
• 1975

Thc purposc of this .study is for ri~aking a model of building a library collcction dcnizn~cd on th.3 curriculum through thc inter-comparison of 15 standards for collcgc ant1 anivcrsily libraries in 5 countries (U. S. A.. Great Ikitain, Canada, Japan, and Icorca) Thc rcsult of thcscl colnpsrisons is as follow.. (1) Qu;~nlitalivc scope: of thc cull(:ction: (r/ Standards for a minimal collcction arc presented to about 100,000 vols (20-30 vols per student) for a ncw university and about 40,000 vols (40 vols pcr studcnt) for a nrnr collcge. $)$ Standards for a working collcction arc prescnted to 70-80 vols per student for a univer:aity and 50-60 vols per student for a college. $$ Standard for an intcnsive rescc~rch collcction is presented to morc than 100 vols p::r studcnt. (2) Stop: of the annual incrc;lsc cf thc collection: (i: Standard for a minimal collcction is ~~rescntcdto 1.4-2 vols per studcnt. $$ Standard for an intensive rrscarch or working collection is pcrsented to 4-5 vols pcr studcnt. (3) Scope of thc anni.1a1 budgetary standards: In Grcat I3ritain and U.S. A.. th-re aro assigned to 1 . 5 ~ 2 % of the collcge and university cxpcnditurr for books. $,$ In our country, it is prcscntcd to 3.5% of thc collcge and university expenditure for books, whcn my calculating by thc various factor analysis.

• Toxicological Research
• /
• v.31 no.3
• /
• pp.227-240
• /
• 2015

Recent amendment on the Food Sanitation Act in Korea mandated the Minister of Food & Drug Safety to secure the scientific basis for management and reevaluation of standards and specifications of foods. Especially because the current food safety control is limited within the scope of 'Farm to Market' covering from production to retail in Korea, safety control at the plane of true 'Farm to Fork' scope is urgently needed and should include 'total diet' of population instead of individual food items. Therefore, 'Total Diet Study (TDS)' which provides 'closer-to-real' estimates of exposure to hazardous materials through analysis on table-ready (cooked) samples of foods would be the solution to more comprehensive food safety management, as suggested by World Health Organization and Food and Agriculture Organization of the United Nations. Although the protection of diets from hazards must be considered as one of the most essential public health functions of any country, we may need to revisit the value of foods which has been too much underrated by the meaningless amount of some hazardous materials in Korea. Considering the primary value of foods lies on sustaining life, growth, development, and health promotion of human being, food safety control should be handled not only by the presence or absence of hazardous materials but also by maximizing the value of foods via balancing with the preservation of beneficial components in foods embracing total diet. In this regard, this article aims to provide an overview on TDS by describing procedures involved except chemical analysis which is beyond our scope. Also, details on the ongoing TDS in Korea are provided as an example. Although TDS itself might not be of keen interest for most readers, it is the main user of the safety reference values resulted from toxicological research in the public health perspective.

• Journal of the Korean Society for information Management
• /
• v.34 no.3
• /
• pp.7-21
• /
• 2017

This study analyzed the methods for representing and linking personal information in the linked data of National Library of Korea and provided suggestions for expanding the scope of identifying and linking of the personal information. As a result, the personal information as a subject has been dealt with a concept, where the personal information as a contributor has been linked with a vocabulary of personal name. In addition, there have not been assured of including additional information except existing authority data in the process of building the linked data. Therefore, this study suggested that linking personal information as a subject and personal information as a contributor was essential for the quality of linked data. In addition, we proposed to provide additional information related to the person in linked data for expanding the scope of access points in information discovery.

• The KIPS Transactions:PartA
• /
• v.16A no.3
• /
• pp.143-152
• /
• 2009

One of the main issues in comparative genomics is to study chromosomal gene order in one or more related species. For this purpose, the whole genome alignment is usually applied to find the horizontal gene transfer, gene duplication, and gene loss between two related genomes. Also it is well known that the novel visualization tool with whole genome alignment is greatly useful for us to understand genome organization and evolution process. There are a lot of algorithms and visualization tools already proposed to find the "gene clusters" on genome alignments. But due to the huge size of whole genome, the previous visualization tools are not convenient to discover the relationship between two genomes. In this paper, we propose AlignScope, a novel visualization system for whole genome alignment, especially useful to find gene clusters between two aligned genomes. This AlignScope not only provides the simplified structure of genome alignment at any simplified level, but also helps us to find gene clusters. In experiment, we show the performance of AlignScope with several microbial genomes such as B. subtilis, B.halodurans, E. coli K12, and M. tuberculosis H37Rv, which have more than 5000 alignment pairs (matched DNA subsequence).