• International Journal of Highway Engineering
• /
• v.14 no.5
• /
• pp.165-177
• /
• 2012

PURPOSES: The number of traffic accidents in 2010 was 226,978 in Korea, a high percentage of which up to 12.61% was due to drunk driving. As it is expected that the number of traffic accidents will increase because of the drastic increase of the number of vehicle registrations and the prevalent drinking cultures, it is necessary to understand the driving characteristics of drunken drivers to lower the increasing rate. METHODS: This study, therefore, comparatively analyzes the two groups - one group before drinking and the other after drinking - based on the graph, and implements the correlation in each scenario(1,2,3). scenario 1. appearance of jaywalkers; scenario 2. appearance of an illegal left-turning car; and scenario 3. appearance of a vehicle and a person as obstacles to the driver after an accident. RESULTS: The comparative analysis of speed shows that the group after drinking was 50km/h faster than the group before drinking in Scenario 1, 20km/h in Scenario 2, and 15km/h in Scenario 3 respectively. In the comparative analysis of acceleration, the average level of the group after drinking was 0.15 higher than that of the group before drinking in Scenario 1, 0.30 in Scenario 2, and 0.15 in Scenario 3. In the comparative analysis of deceleration, the average level of the group after drinking was about 0.4 lower than that of the group before drinking in Scenario 1, 0.35 in Scenario 2, and 0.2 in Scenario 3 respectively. In the comparative analyses, the item of speed, acceleration and deceleration was of significance for each group in Scenarios. CONCLUSIONS: The comparative analysis demonstrated that there is a difference between the group before drinking and the group after drinking. In the analysis of correlation in each group, it was proved that the drunken group was of significance.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.6 s.40
• /
• pp.23-29
• /
• 2004

The design earthquake used for the seismic analysis and design of NPP (Nuclear Power Plant) is determined by the deterministic or probabilistic methods. The probabilistic seismic hazard analysis(PSHA) for the nuclear power plant sites was performed for the probabilistic seismic risk assessment. The probabilistic seismic hazard analysis for the nuclear power plant site had been completed as a part of the probabilistic seismic risk assessment. The probabilistic method become a resonable method to determine the design earthquakes for NPPs. In this study, the defining method of the probability based scenario earthquake was established, and as a sample calculation, the probability based scenario earthquakes were estimated by the de-aggregation of the probabilistic seismic hazard. By using this method, it is possible to define the probability based scenario earthquakes for the seismic design and seismic safety evaluation of structures. It is necessary to develop the rational seismic source map and the attenuation equations for the development of reasonable scenario earthquakes.

• Korean Journal of Childcare and Education
• /
• v.12 no.6
• /
• pp.123-137
• /
• 2016

The purpose of this study was to forecast demand of childcare teachers based ion four different scenarios. In order to, the demand for childcare teachers from 2015 to 2024 were forecasted using time series techniques with data on the number of childcare teachers from 2003 to 2014. Results were as followings. Firstly, the demand for childcare teachers was expected to increase until 2019, but after 2020 steadily decreased in terms of scenario 1(child teacher ratio regulation). According to scenario 2(child teacher ratio based on 17 cities and provinces), the demand for childcare teachers was expected to need 440 teachers more until 2016. Then, according to scenario 3(two teachers each class), Scenario 4-1(one teacher and one staff each 2 toddler class and 3 older class) and scenario 4-2(one teacher and one staff each class), the demand of childcare teachers and staffs were estimated. These results implicated that childcare teachers and staffs supply policy would be established according to forecast demand.

• Journal of Construction Engineering and Project Management
• /
• v.6 no.2
• /
• pp.24-29
• /
• 2016

This paper elaborates the significance of scenario planning in risk management, and presents an integrated approach which takes into account the 'Risk Events' derived from scenario planning for risk prioritisation. This research integrates scenario planning with Risk Failure Mode and Effect Analysis (RFMEA) through examples from construction litigations of project schedule and cost overrun cases as a simplified approach to project risk management. The proposed methodology incorporates scenarios developed from realistic events of dispute and arbitration cases from construction projects, and thereby increasing potential to foresee risks and their effects well in advance. The results from this methodology shall be validated against outcome of survey study conducted by KPMG-PMI (2013) on project schedule and cost overruns that was based on Ministry of Statistics and Programme Implementation (MoSPI) Project Monitoring data for 2012-13.

• Journal of Climate Change Research
• /
• v.7 no.3
• /
• pp.341-349
• /
• 2016

This study is intended to set a greenhouse gas emission scenario based on green remodeling pilot project (Annex building of Seoul Customs Office) using LEAP model, a long-term energy plan analysis model, to calculate the energy saving and greenhouse gas emission till year 2035 as well as to analyze the effect of electric power saving cost. Total 4 scenarios were made, Baseline scenario, assuming the past trend is to be maintained in the future, green remodeling scenario, reflecting actual green remodeling project of Seoul Customs Office, behavior improvement and renewable energy supply, and Total scenario. According to the analysis result, the energy demand in 2035 of Baseline scenario was 6.1% decreased from base year 2013, that of green remodeling scenario was 17.5%, that of behavior improvement and renewable energy supply scenario was 21.1% and that of total scenario was 27.3%. The greenhouse emission of base year 2013 was $878.2tCO_2eq$, and it was expected $826.3tCO_2eq$, approx. 5.9% reduced, in 2035 by Baseline scenario. the cumulative greenhouse gas emission saving of the analyzing period were $-26.5tCO_2eq$ by green remodeling scenario, $2.8k\;tCO_2eq$ by behavior improvement and renewable energy supply scenario, and $2.0k\;tCO_2eq$ by total scenario. In addition the effect of electricity saving cost through energy saving has been estimated, and it was approx. 634 million won by green remodeling scenario and appro. 726 million won by behavior improvement and renewable energy supply scenario. So it is analyzed that of behavior improvement and renewable energy supply scenario would be approx. 12.7% higher than that of green remodeling scenario.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.45-53
• /
• 2023

In order to solve the rapidly increasing domestic delivery volume and various problems in the recent metropolitan area, domestic researchers are conducting research on the development of "Urban Logistics System Using Underground Space" using existing urban railway facilities in the city. Safety analysis and scenario analysis should be performed for the safe system design of the new concept logistics system, but the scenario analysis techniques performed in previous studies so far do not have standards and are defined differently depending on the domain, subject, or purpose. In addition, it is necessary to improve the difficulty of clearly defining the control structure and the omission of UCA in the existing STPA safety analysis. In this study, an improved scenario table is proposed for the AGV horizontal transport device, which is a key equipment of an urban logistics system using underground space, and a process model is proposed by linking systematic STPA safety analysis and scenario analysis, and UCA and Control Structure Guidelines are provided to create a safety analysis.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.2
• /
• pp.279-288
• /
• 2017

The Material Transportation Capability Analysis Method in North Korea includes adversary's activities such as destruction of bridge which is one kind of choke points in the road network and surprise attack against resupply march unit. Also, the amount of damage on choke points in the road network and repair time depending on repair unit commitment must be reflected. In this study, a scenario encompassing plausible resupply transportation circumstances while counterattacking into NK will be established. Then, based on such scenario, a simulation model will be established and the result of simulation will be compared to the results of numeric example which has been used in the ROK Army. We demonstrate, through a certain Corps operation area, that the Scenario-based Simulation Model results predict the performance of resupply operation very well. Therefore, it makes sustainment planners and commanders do activities which is suitable for battlefield and should be used in the real situation. It is also a stochastic model.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.28 no.2
• /
• pp.91-103
• /
• 2003

Use case modeling on UML (Unified Modeling Language) is getting widely used in OOAD and CBD and it is considered a useful technique in dealing with the complexity of the requirements analysis. However, some of the problems with use case modeling are that it is not structured, difficult to handle non-functional requirements, and to analyze impacts among use cases. To alleviate these problems, we propose a scenario-based goal-oriented approach for use case modeling. The proposed approach is to apply a goal-oriented analysis method to use case modeling. Since goal-oriented analysis method is not systematic and many heuristics are involved, we have adopted scenarios as the basis for goal extraction. The proposed method is applied to CBIS (City Bus Information Subsystem) in ITS (Intelligent Transportation System) domain. The proposed approach helps software engineers to analyze the impact among use cases and represent non-functional requirements.

• Journal of KIISE:Software and Applications
• /
• v.33 no.8
• /
• pp.655-667
• /
• 2006

This paper proposes a method for counting function point using goal and scenario based requirements. Function Point is a software sizing method and widely used as a basis to estimate software development cost. Requirements elicitation and analysis should be performed before function point analysis but function point analysis method doesn't deal with requirements elicitation and analysis. For that reason, Function point extraction method from existing requirements method is needed and if the requirements method has advantage for traceability and elicitation, it is suitable for managing cost. Goal and scenario method is widely used as requirements elicitation and analysis. It has also good traceability. Therefore, this paper discusses a method for extracting function point from requirements text gathered using the goal and scenario based requirements elicitation technique. The proposed method aims to establish and maintain traceability between function point and requirements text. Text based function point extraction guidance rules have been developed. The proposed methodology has been applied to Order Processing System development.

• Educational Technology International
• /
• v.24 no.1
• /
• pp.1-27
• /
• 2023

This study aimed to examine an augmented reality-based teaching simulation in a mobile application. We examined how AR-enabled interactions affect users' perceived scenario usefulness and avatar realism. The participants were forty-six undergraduate students. We randomly grouped them into two conditions: AR and Non-interactive video groups with equal sample sizes. This study employed an experimental design approach with a one-way multivariate analysis of variance with repeated measures. The independent variable is the presence/absence of AR interaction with a mobile application. The dependent variables were avatar realism and scenario usefulness. The measures explored how the student avatar's emotional intensity in a scenario influences user perception. The results showed that participants in the AR-interaction group perceived avatar realism significantly higher than those in the non-interactive video group. Also, participants perceived the high emotional intensity scenario (aggression toward peers) to be significantly higher usefulness than the low emotional intensity scenario (classroom disruption).