• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.303-303
• /
• 2007

Photo-imageable thick-film lithography technology was developed for the fabrication of embedded passives such as inductors and capacitors. In this study, photo-imageable dielectric and conductor pastes have apoted a negative type. Sodalime glass wafer, alumina substrate and zero-shrinkage LTCC green tapes were used as substrates. In result, The lithographic patterns were designed as lines and spaces for conductor material, or via-holes for ceramic, LTCC, materials. The scattering and reflection of UV-beam on the substrate had negative effects on fine patterning. The patterning performance was varied with the exposing and developing process conditions, and also varied with the substrate materials. Fine resolution of less then $50/50{\mu}m$ in line and space was obtained, which is difficult in screen printing method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.11a
• /
• pp.617-620
• /
• 1999

To reduce the consumption of chemicals and ultra pure water(UPW) in cleaning process used in device manufacturing, we proposed wet processes that use electrolytic ionized water(EIW), which is generated by electrolysis of a diluted electrolyte solution or UPW and systemically investicate the EIW\`s characteristics. EIW\`s pH values are increased in cathode chamber and decreased in anode chamber according to the electrolysis time and its varied ratio is reduced with time increasement. The variation of pH and ORP is increased accordin to the applied voltage until critical voltage. But more than that voltage, the variation is decreased because of ion\`s scattering effect. When electrolyte is added, the effects of electrolysis is increased because electrolyte acts as catalyst. But when the density of electrolyte is increased more than critical value, ion\`s flowage is obstructed and the effects of electrolysis is decreased.

• Bulletin of the Korean Chemical Society
• /
• v.16 no.10
• /
• pp.957-968
• /
• 1995

Generalized Multichannel Quantum Defect theory (MQDT) was implemented to the vibrational predissociation of triatomic van der Waals molecules in the previous paper [Bull. Korean Chem. Soc, 12, 228 (1991)]. Implementation was limited to the calculation of the scattering matrix. It is now extended to the calculation of the predissociation spectra and the final rotational distribution of the photofragment. The comparison of the results with those obtained by other methods, such as Golden-rule type calculation, infinite order sudden approximation (IOS), and close-coupling method, shows that the implementation is successful despite the fact that transition dipole moments show more energy dependence than other quantum defect parameters. Examination of the short-range channel basis functions shows that they resemble angle-like functions and provide the validity of the IOS approximation. Besides the validity of the latter, only a few angles are found to play the major role in photodissociation. In addition to the implementation of MQDT, more progress in MQDT itself is made and reported here.

• Journal of the Optical Society of Korea
• /
• v.17 no.1
• /
• pp.73-80
• /
• 2013

In the process of lithography using ultra violet light sources for semiconductor devices, most of defects are made by sub-micrometer pollutants generated at photochemical reactions. We proposed and developed a novel vibration-insensitive on-axis interferometer with a sub-micrometer lateral resolution by using the interference between two beams: one scattered from defects and the other reflected from a reference area without defects. The proposed system was successfully demonstrated to detect a small Al defect of 0.5 ${\mu}m$ diameter within the inspection time of less than 30 minutes over the area of the photo-mask which is 6 inch by 6 inch square.

• Journal of Korea Game Society
• /
• v.21 no.4
• /
• pp.109-116
• /
• 2021

In this paper, we considered that recently 3D game characters have been almost alike realistic expression because of a great mathematical computation and efficient techniques on GPU hardware. We presented the rendering technique and analysis for 3D game characters to simulate and render mathematical approach model from recent researches to perform the game engine for the surface reflection of lighting model. We compare our approach with the existing variant rendering techniques here using Open GL shader language on game engine. The experimental result will be provided the view-dependent visual appearance of variant and effective modeling characters for realistic expression using existing methods on the GPU for effective simulations and rendering process. Since there are many operations that are used redundantly while performing mathematical operations, the necessary functions and requirements have been to compute in advance.

• Current Optics and Photonics
• /
• v.5 no.6
• /
• pp.617-626
• /
• 2021

A parallel Monte Carlo photon migration algorithm for graphics processing units that implements an improved load-balancing strategy is presented. Conventional parallel Monte Carlo photon migration algorithms suffer from a computational bottleneck due to their reliance on a simple load-balancing strategy that does not take into account the different length of the mean free paths of the photons. In this paper, path-partition load balancing is proposed to eliminate this computational bottleneck based on a mathematical formula that parallelizes the photon path tracing process, which has previously been considered non-parallelizable. The performance of the proposed algorithm is tested using three-dimensional photon migration simulations of a human skin model.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.56.3-56.3
• /
• 2021

In a ΛCDM universe, most galaxies are believed to evolve by mergers and accretions. The debris resulting from such processes remains faint and/or diffuse structures, such as tidal streams and stellar halos. Although these structures are a good indicator of the recent mass assembly history of galaxies, they have the disadvantage of being difficult to observe due to their low surface brightness (LSB). To recover these LSB features by reducing the photometric uncertainties introduced by the optics system, we attempt to develop an optimized telescope, called a linear astigmatism free-three mirror system, that minimizes the loss and scattering of light within the telescope. With that prototype, we observe NGC 5907, known as a nearby galaxy with a fabulous loop structure(s), to inspect its performance. After a dedicated data reduction process, including flat-fielding with dark sky flat and sky subtraction, our observation reaches a 1σ surface brightness limit of μlim,r ≃ 28.3 mag arcsec-2 in 10×10 arcsec boxes. We finally identify a single tidal stream that is likely the remnant of a nearly disrupted galaxy. This finding emphasizes that the capability of LSB detection with our telescope is comparable to that of much larger telescopes.

• Resources Recycling
• /
• v.24 no.3
• /
• pp.34-43
• /
• 2015

Raw materials in steel industry decide on the productivity, quality and price competitiveness. Utilizing iron-containing by-products as raw materials for steel products can save the cost of cleaning up iron-containing by-products and solve environmental issues. Iron-containing by-products have a small particle size. If they are directly inserted in a steel making process, it cause a problem such as poor heat flow and scattering. To solve these problems and induce the additional reduction, study concern with iron ore-coal mixed briquette technique are conducted by many researchers. In this paper, method of making carbon composite briquette iron(CCBI) using iron-containing by-products was studied. The effect of composition of Fe-containing process wastes, reducing agent, flux and binder on formability of CCBI (carbon composite briquette iron) was measured.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.28 no.12
• /
• pp.1557-1566
• /
• 2004

A flame extinction phenomenon is a typical unsteady process in combustion. Flame extinction is characterized by various physical phenomena, such as convection, diffusion, and the production of heat and mass. Flame extinction can be achieved by either increasing the strain rate or curvature, by diluting an inert gas or inhibitor, or by increasing the thermal or radiant energy loss. Though the extinction is an inherently transient process, steady and quasi-steady approaches have been used as useful tools for understanding the flame extinction phenomenon. Recently, unsteady characteristics of flames have been studied by many researchers, and various attempts have been made to understand unsteady flame behavior, by using various extinction processes. Representative parameters for describing flame, such as flame temperature, important species related to reactions, and chemi-luminescence of the flame have been used as criterions of flame extinction. In these works, verification of each parameter and establishing the proper criterions of the extinction has been very important. In this study, a time-dependent flame temperature and an OH radical concentration were measured using optical methods, and the instantaneous change of the flame luminosity was also measured using a high-speed ICCD (HICCD) camera. We compare the unsteady extinction points obtained by three different methods, and we discuss transient characteristics of maximum flame temperature and OH radical distribution near the extinction limit.

• Korean Journal of Materials Research
• /
• v.11 no.2
• /
• pp.104-114
• /
• 2001

To investigate the effects of the addition of Nb and Sn on the recrystallization of Zr- Sn-Nb alloys, both Vickers micro-hardness test and TEP measurement were carried out on cold-worked specimens annealed at various temperatures from $300^{\circ}C$ to 75$0^{\circ}C$. The microstructures of heat treated specimens were analyzed by optical microscope, SEM, and TEM. The study of microhardness and microstructures showed that both recrystallization process and grain growth were retarded as the activation energy was increased by the addition of Nb and Sn. Especially, the addition of Sn was more effective on retarding recrystallization. Precipitates were formed more easily when Nb was added because the solubility of Nb into Zr is lower than that of Sn. However, the recrystallization process was affected more by Sn than Nb because the strain field formed by substitutional Sn repressed the dislocation movement. TEP was increased due to the decrease of electron scattering as recovery and recrystallization were proceeded and saturated when the recrystallization completed. However, when precipitates formed, TEP was increased because the decrease of solute concentration near the precipitates caused the decrease of electron scattering.