• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3E
• /
• pp.115-122
• /
• 2006

The bistatic scattering of an incident wave by a hemi-spherically capped cylinder is of particular interest because it has rarely been studied until the present day. The configuration of a hemi-spherically capped cylinder is similar to naval underwater weapons (submarines, mines, torpedos, etc.), but which is not exactly the same. This paper describes a novel laboratory experiment aimed at direct measurement of bistatic scattering by a hemi-spherically capped cylinder. Bistatic scattering by a hemi-spherically capped cylinder was measured in an acoustic water tank (5m long, 5m wide, 5m deep) using a high frequency projector (120kHz) and hydrophone. Measurements of monostatic scattering were also made under the same conditions. The bistatic scattering pattern by a hemi-spherically capped cylinder was measured against the incident angles $(0^{\circ},\;15^{\circ},\;20^{\circ},\;30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ})$ in order to verify various scattering pattern characteristics by the change of incident angle. The results indicate that the bistatic scattering TS at a wide scattering angle is much stronger than the mono static scattering TS. In bistatic scattering, the forward scattering TS is significantly stronger than the backward scattering TS, and the forward scattering pattern is also broader. In case of seven incident angles, the maximum value of forward scattering TS is about 14dB stronger than that of backward scattering TS. It is also found that forward scattering varies with the incident angle of sound to a much less extent than backscattering, and it is not seriously affected by the incident angle. These features could be the advantages of using forward scattering for detecting underwater targets at long range and increasing detection area and probability.

• Nuclear Engineering and Technology
• /
• v.55 no.8
• /
• pp.2864-2872
• /
• 2023

The criticality problem in this study is studied with the recently investigated the Anlı-Güngör scattering function. The scattering function depends on the Legendre polynomials as the Mika scattering function, but it includes only one scattering parameter, t, and its orders. Both Mika and Anlı-Güngör scattering are the same for only linear anisotropic scattering. The difference appears for the quadratic scattering and further. The analytical calculations are performed with the H_N method, and the numerical results are calculated with Wolfram Mathematica. Interpolation technique in Mathematica is also used to approximate the isotropic scattering results when t parameter goes to zero. Thus, the calculated results could be compared with the literature data for isotropic scattering.

• Journal of the Semiconductor & Display Technology
• /
• v.9 no.4
• /
• pp.31-37
• /
• 2010

In this paper, optical deflection of laser scattering has been investigated based on Rayleigh criterion for crystalline silicon wafer in solar cell. A laser scattering mechanism is newly designed using light scattering properties in silicon wafer. Intensity distributions of laser scattering are different, depending on the incident angle of laser computed from Rayleigh criterion. In case of the incident angle satisfied with the criterion, they are asymmetric. Also, their specular reflection angle is shifted to unpredicted ones. These phenomena are in accordance with previous theories of laser scattering. The optical deflection of laser scattering is experimentally identified with the designed laser scattering mechanism. Its mathematical model is presented from the geometric relationship of laser scattering. It is shown that the optical deflection of laser scattering agree with the presented model, exclusive of grazing angles which is satisfied with Rayleigh criterion.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.40.1-40.1
• /
• 2021

Hydrogen is the most abundant element in the universe, which is, in the cosmological context, attributed to its simplest structure consisting of a proton and an electron. Hydrogen interacts with an electromagnetic wave in astrophysical environments. Rayleigh scattering refers to elastic scattering, where the frequencies of the incident and scattered photons are the same. Rayleigh and resonance scattering is a critical role study Lyman Alpha objects in the early universe. The scattering causes the frequency and spatial diffusion of Lyα. In the case of Raman scattering, the energies of the incident and scattered photons are different. The photons near Lyβ convert to the optical photons near Hα through Raman scattering. The photon scattered by atomic hydrogen can carry both of the properties of the H I region and the emission region. I adopt a Monte Carlo approach to investigate the formation of the various spectral line features through Rayleigh and Raman scattering in highly thick media of atomic hydrogen. In this thesis, I present my works on radiative transfer involving the scattering processes between far UV photon and atomic hydrogen. I introduce scattering processes with atomic hydrogen and the spectral, spatial, and polarized information originating from the scattering.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.606-613
• /
• 2011

In this paper, patterns of laser scattering and detection of micro defects have been investigated based on Rayleigh criterion for silicon wafer in solar cell. Also, a new laser scattering mechanism is designed using characteristics of light scattering against silicon wafer surfaces. Its parameters are to be optimally selected to obtain effective and featured patterns of laser scattering. The optimal parametric ranges of laser scattering are determined using the mean intensity of laser scattering. Scattering patterns of micro defects are investigated at the extracted parameter region. Among a lot of pattern features, both maximum connected area and number of connected component in patterns of laser scattering are regarded as the important information for detecting micro defects. Their usefulness is verified in the experiment.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.41-43
• /
• 2003

A radar scattering model is developed based on an empirical rough surface scattering model, the radiative transfer model (RTM), a numerical simulation algorithm of radar scattering from particles, and experimental data obtained by ground-based scatterometers and SAR systems. At first, the scattering matrices of scattering particles such as a leaf, a branch, and a trunk, have been modeled using the physical optics (PO) model and the numerical full-wave analysis. Then, radar scattering from a group of mixed particles has been modeled using the RTM, which leads to a general scattering model for earth surfaces. Finally, the scattering model has been verified with the experimental data obtained by scatterometers and SAR systems.

• Korean Journal of Materials Research
• /
• v.22 no.10
• /
• pp.519-525
• /
• 2012

Enhancement of light trapping in solar cells is becoming increasingly urgent for the development of next generation thin film solar cells. One of the possible candidates for increasing light trapping in thin film solar cells that has emerged recently is the use of scattering from metallic nanostructures. In this study, we have investigated the effects of the geometric parameters of Ag nanorings on the light scattering efficiency by using three dimensional Finite Different Time Domain (FDTD) calculations. We have found that the forward scattering of incident radiation from Ag nanorings strongly depends on the geometric parameters of the nanostructures such as diameter, height, etc. The forward scattering to substrate direction is increased as the outer diameter and height of the nanorings decrease. In particular, for nanorings larger than 200 nm, the inner diameter of Ag nanorings should be optimized to enhance the forward scattering efficiency. Light absorption and scattering efficiency calculations for the various nanoring arrays revealed that the periodicity of nanorings arrays also plays an important role in the absorption and the scattering efficiency enhancement. Light scattering efficiency calculations for nanoring arrays also revealed that enhancement of scattering efficiency could be utilized to enhance the light absorption through the forward scattering mechanism.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.142-148
• /
• 2006

The resonances that contain the information on the properties of the scattering target can be used for target reconstruction approaches. The inverse scattering theory for the resonances has been applied to the problems of the scattering for a spherical, cylindrical dielectric objects and dielectrically coated conductors, shown reasonable results. Though by using this method the thickness and the dielectric constants of the target can be obtained from a determination of the spacing and of the widths of the scattering resonances, the radius of the target should be given. In this paper, we suggest the improved inverse theory combined with the resonance scattering theory to obtain the radius in addition to the dielectric constant of the target. The applications of this method for scattering problems of electromagnetic waves from cylindrical targets were accomplished, and it shows its validity.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.2
• /
• pp.267-280
• /
• 1992

This paper describes a numerical analysis of the light scattering patterns of roughness profiles. This analysis was based upon the light scattering theory developed by Beckmann. In the analysis, the roughness profile was regarded as a profile whose irregularities depend on the production process and the shape of cutting tool. Generally, waviness of an actual surface seriously distorts the scattered pattern of roughness profile. In order to avoid the effects of waviness of actual surfaces, several theoretically calculated scattering patterns, instead of actual scattering patterns, were used to analyze the scattering patterns of typical engineering roughness profiles. The characteristics of the light scattering patterns for five model surfaces were studied.

• Transactions of the Korean hydrogen and new energy society
• /
• v.24 no.5
• /
• pp.451-460
• /
• 2013

In a direct coal fuel cell (DCFC) system, it is essential to identify volume fraction of coal suspended in electrolyte melt in order to control its dispersion and fluidity. This requirement is compelling especially at anode channel where hot slurry is likely to flow at low velocity. In this study, light scattering techniques were employed to measure the volume fraction for a pulverized coal suspension with relatively high absorption coefficient. The particle size, scattering angle, and volume fraction were varied to evaluate their effects on the scattering behavior as well as scattering regime. The larger coal size and smaller forward scattering angle could provide a shift to more favorable scattering regime, i.e., independent scattering, where interferences of light scattering from one particle with others are suppressed.