• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권2호
• /
• pp.738-756
• /
• 2020

The modular multiplication is the key module of public-key cryptosystems such as RSA (Rivest-Shamir-Adleman) and ECC (Elliptic Curve Cryptography). However, the efficiency of the modular multiplication, especially the modular square, is very low. In order to reduce their operation cycles and power consumption, and improve the efficiency of the public-key cryptosystems, a dual-field efficient FIPS (Finely Integrated Product Scanning) modular multiplication algorithm is proposed. The algorithm makes a full use of the correlation of the data in the case of equal operands so as to avoid some redundant operations. The experimental results show that the operation speed of the modular square is increased by 23.8% compared to the traditional algorithm after the multiplication and addition operations are reduced about (s² - s) / 2, and the read operations are reduced about s² - s, where s = n / 32 for n-bit operands. In addition, since the algorithm supports the length scalable and dual-field modular multiplication, distinct applications focused on performance or cost could be satisfied by adjusting the relevant parameters.

• 전자공학회논문지 IE
• /
• 제43권1호
• /
• pp.52-58
• /
• 2006

본 논문에서는 제한된 자원을 가지는 포터블 임베디드 시스템을 위하여, 작은 메모리 사용으로 효율적으로 영상 부호화가 가능한 웨이블릿 영상 부호화기를 제안하였다. 제안된 방법은 부호화 과정시 요구되는 메모리 사용량을 줄이기 위해 웨이블릿 계수들의 비트 레벨 정보를 가지는 2차원 중요 계수 배열을 사용한다. 제안된 방법은 중요 계수에 대한 부호화 과정과 계수들의 비트 레벨 정보의 부호화 과정을 한 번에 수행할 수 있다. 실험 결과 기존의 부호화 방법보다 화질 면에서 비슷하거나 우수한 성능을 보였으며, 2차원 중요 계수 배열을 이용한 최소의 메모리 사용으로 다양한 비트율에서 영상의 일그러짐 없이 안정적으로 동작함을 확인하였다.

• 대한전자공학회논문지SD
• /
• 제38권8호
• /
• pp.27-33
• /
• 2001

파장을 스케닝하기 위해 Fabry-Perot 필터를 사용하는 기존의 광섬유 브래그 격자(FBG) 스트레인 측정시스템은 PZT의 히스테리시스 특성과 필터의 느린 스케닝 시간 그리고 높은 가격으로 인해 응용이 제한적이다. 광원으로 비교적 저가인 발광 다이오드(LED)를 사용하고 FBG 센서를 다중화하기 위해 코드 분할 다중화(CDM) 방식을 도입한 다중 FBG 센서 시스템을 제안하였으며 실험을 통해 특성을 측정하였다. 실험은 정적 스트레인과 동적 스트레인을 측정하기 위한 두 가지 구조의 시스템에 대한 출력과 센서 신호간의 누화를 측정하였다. 구성한 시스템은 매우 저가이고 빠른 응답속도를 갖으며 누화의 레벨은 -30 dB 이하로 측정되었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제4권5호
• /
• pp.297-304
• /
• 2015

A multilayer gaseous detector has been developed for fast dose-verification measurements of raster-scan-mode therapeutic beams in particle therapy. The detector, which was constructed with eight thin parallel-plate ionization chambers (PPICs) and polymethyl methacrylate (PMMA) absorber plates, is closely tissue-equivalent in a beam's eye view. The gas-electron signals, collected on the strips and pad arrays of each PPIC, were amplified and processed with a continuous charge.integration mode. The detector was tested with 190-MeV raster-scan-mode beams that were provided by the Proton Therapy Facility at Samsung Medical Center, Seoul, South Korea. The detector responses of the PPICs for a 190-MeV raster-scan-mode proton beam agreed well with the dose data, measured using a 2D ionization chamber array (Octavius model, PTW). Furthermore, in this study it was confirmed that the detector simultaneously tracked the doses induced at the PPICs by the fast-oscillating beam, with a scanning speed of 2 m s-1. Thus, it is anticipated that the present detector, composed of thin PPICs and operating in charge.integration mode, will allow medical scientists to perform reliable fast dose-verification measurements for typical dynamic mode therapeutic beams.

• ALGAE
• /
• 제23권1호
• /
• pp.83-90
• /
• 2008

Eelgrass beds are very productive and provide nursery functions for a variety of fish and shellfish species. Management for the conservation of eelgrass beds along the Korean coasts is critical, and requires comprehensive strategies such as vegetation mapping. We suggest a mapping method to spatial distribution and quantify of eelgrass beds using a digital echosounder. Echosounding data were collected from the northeast part of Kwangyang Bay, on the south of Korea, in March, 2007. A transducer was attached to a boat equipped with a DGPS. The boat completed a transect survey scanning whole eelgrass beds of 11.7 km2 with a speed of 1.5-2 m s-1 (3-4 knot). The acoustic reflectivity of eelgrass allowed for detection and explicit measurements of canopy cover and height. The results showed that eelgrass bed was distributed in depth from 1.19 to 3.6 m (below MSL) and total dry weight biomass of 4.1 ton with a vegetation area of 4.05 km2. This technique was found to be an effective way to undertake the patch size and biomass of eelgrass over large areas as nondestructive sampling.

• 센서학회지
• /
• 제15권3호
• /
• pp.153-157
• /
• 2006

This paper presents the method for three-dimensional micro structure with photoresist spray coating system. The system consists of a high temperature rotational chuck, ultrasonic spray nozzle module, angle control module and nozzle moving module. Spray coating system is effected by several parameters such as the solid contents, the dispensed volume, the scanning speed of the spray nozzle and the wafer of dimension. The photoresist (AZ 1512) has been coated on the three-dimensional micro structure by spray coating system and the characteristics have been evaluated.

• 한국항공운항학회지
• /
• 제28권3호
• /
• pp.18-26
• /
• 2020

Cost reduction and equality by exempting re-scanning of passengers, baggage and cargo secured from the first airport of departure, mainly in the European Union/European Economic Area(EU/EEA), Switzerland, etc. One-Stop Security(OSS) is being promoted to maintain the level of security while increasing speed and convenience, and movement is expected to expand worldwide. Therefore, this paper establishes the basic concept of OSS through a literature review of ICAO Standards and Recommended Practices(SARPs), and analyzes the actual conditions of OSS implementation in major countries such as the United States and the EU. It is intended to present the political, economic benefits for Korea and highlight the urgency of implementing the OSS system in the aviation industry including the cargo sector. Therefore, the practical implications of strengthening international cooperation through the expansion of government and airport operators OSS implementation to overcome the resource shortage problem of the existing national air cargo security system and to strengthen the status as a global aviation powerhouse were drawn up. There is academic significance that it raised the need for effective implementation of OSS, which was not previously covered.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.438-443
• /
• 2005

Laser surface hardening is an effective technique used to improve the tribological properties and also to increase the service life of automobile components such as camshafts, crankshatfs, lorry brake drums and gears. High power CO2 lasers and Nd:YAG lasers are employed for localized hardening of materials and hence are of potential application in the automobile industries. The heat is conducted rapidly into the bulk of the specimen causing self-quenching to occur and the formation of martensitic structure. In this investigation, the microstructure features occurring in Nd:YAG laser hardening SM45C steel are discussed with the use of optical microscopic and scanning electron microscopic analysis. Moreover, This paper describes the optimism of the processing parameters for maximum hardened depth of SM45C steel specimens of 3mm thickness by using CW Nd:YAG laser. Travel speed was varied from 0.6m/min to 1.0m/min. The maximum hardness and case depth fo SM45C steel are 780Hv and 0.4mm by laser hardening.

• Tribology and Lubricants
• /
• 제22권3호
• /
• pp.127-130
• /
• 2006

DLC (Diamond Like Carbon) films show very desirable surface interactions with high hardness, low friction coefficient, and good wear-resistance properties. The friction behavior of hydrogenated DLC film is dependent on tribological environment, especially surrounding temperature. In this work, the tribological behaviors of DLC (Diamond-like carbon) films, prepared by the radio frequency plasma enhanced chemical vapor deposition (RF-PECVD) method, were studied in elevated temperatures. The ball-on-disk tests with DLC films on steel specimens were conducted at a sliding speed of 60 rpm, a load of 10N, and surrounding various temperatures of $25^{\circ}C,\;40^{\circ}C,\;55^{\circ}C\;and\;75^{\circ}C$. The results show considerable dependency of DLC tribological parameters on temperature. The friction coefficient decreased as the surrounding temperature increased. After tests the wear tracks of hydrogenated DLC film were analyzed by optical microscope, scanning electron spectroscopy (SEM) and Raman spectroscopy. The surface roughness and 3-D images of wear track were also obtained by an atomic force microscope (AFM).

• 한국광학회지
• /
• 제21권5호
• /
• pp.206-213
• /
• 2010

광 간섭 단층촬영 시스템(OCT)을 위한 소형의 광섬유 도관형 주사장치인 엔도스코프(endoscope catheter)를 제작하였다. 깊이방향 주사장치인 원통형 압전소자(PZT)를 이용한 광경로 지연기는 정현파 1 kHz로 구동하여 시간영역에서 엔도스코프 OCT 영상을 구현하였다. 정현파로 구동한 광경로 지연기의 속도는 6 m/s 이고, 깊이방향 스캐닝의 데이터 획득은 3 mm 기준에서 초당 2000 라인이다. 제작한 엔도스코프로 사람의 손가락 및 귀에 대한 초당 10프레임의 OCT 영상을 성공적으로 획득하였다.