• Journal of Advanced Marine Engineering and Technology
• /
• 제35권2호
• /
• pp.252-257
• /
• 2011

본 연구에서는 초경량성 마그네슘 재료를 엔진 블록, 실린더 헤드커버 등과 같은 박용기관에 적용하기 위한 환경 친화적 표면처리의 개발에 대하여 고찰하였다. 또한 이온플레이팅법에 의해 마그네슘 박막을 제작하고, 그 제작조건에 따라 변화하는 막의 결정배향성과 몰포로지가 경도특성에 미치는 영향을 해명하고자 하였다. 마그네슘 박막의 경도측정 결과, 아르곤 가스압의 증가에 따라 그 경도값이 상승하였 는데, 그 원인은 결정립계에 의한 강화와 성분 외 가스입자의 흡장효과에 의한 것으로 사료된다.

• Applied Microscopy
• /
• 제45권3호
• /
• pp.183-188
• /
• 2015

Due to the miniaturization of semiconductor devices, their crystal structure on the nanoscale must be analyzed. However, scanning electron microscope-electron backscatter diffraction (EBSD) has a limitation of resolution in nanoscale and high-resolution electron microscopy (HREM) can be used to analyze restrictive local structural information. In this study, three-dimensional (3D) automated crystal orientation and phase mapping using transmission electron microscopy (TEM) (3D TEM-EBSD) was used to identify the crystal structure relationship between an epitaxially grown CdS interfacial layer and a $Cu(In_xGa_{x-1})Se_2$ (CIGS) solar cell layer. The 3D TEM-EBSD technique clearly defined the crystal orientation and phase of the epitaxially grown layers, making it useful for establishing the growth mechanism of functional nano-materials.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.313-314
• /
• 2007

AlN is used a wide variety of applications such as electroacoustic devices, blue diode and metal-insulator-semiconductor structures. AlN thin films were deposited on Si substrates by rf sputter technique with low temperature process. The orientation and morphology of AlN thin films at various power in the range from 150 to 300 w was studied. X-ray diffraction (XRD), full width at half-maximum (FWHM) and field emission scanning electron microscopy were employed to characterize the deposited films. The c-axis orientation along (002) Plane at experimental results was enhanced with the increasing of the rf power from 150 to 300 w and the surface morphology of the films showed a homogeneous and nano-sized microstructure.

• Journal of Advanced Marine Engineering and Technology
• /
• 제20권5호
• /
• pp.103-113
• /
• 1996

The properties of the deposited film depend on the deposition condition and these, in turn depend critically on the morphology and crystal orientation of the films. Therefore, it is important to clarify the nucleation occurrence and growth stage of the morphology and orientation of the film affected by deposition parameters, e.g. the gas pressure and bias voltage etc. In this work, magnesium thin flims were prepared on cold-rolled steel substrates by a thermo-eletron activation ion plating technique. The influence of nitrogen gas pressure and substrate bias voltage on their crystal orientation and morphology of the coated films were investigated by scanning electron microscopy (SEM) and X-ray diffraction, respectively. The diffraction peaks of magnesium film became less sharp and broadened with the increase of nitrogen gas pressure. With an increase in nitrogen gas pressure, flim morphology changed from colum nar to granular structure, and surface crystal grain-size decreased. The morphology of films depended not only on gas pressure but also on bias voltage, i.e., the effect of increasing bias voltage was similar to that of decreasing gas pressure. The effect of crystal orientation and morphology of magnesium films on corrosion behaviors was estimated by measuring anodic polarization curves in deaerated 3%NaCl solution. Magnesium, in general, has not a good corrosion resistance in all environments. However, these magnesium films prepared by changing nitrogen gas pressure showed good corrosion resistance. Among the films, magnesium films which exhibited granular structure had the highest corrosion resistance. The above phenomena can be explained by applying the effects of adsorption, occlusion and ion sputter of nitrogen gas.

• 센서학회지
• /
• 제16권3호
• /
• pp.240-245
• /
• 2007

AlN thin film for SAW filter application was deposited on (100) silicon, sapphire, $Si_{3}N_{4}$/Si, and $Al_{2}O_{3}$/Si substrates by reactive magnetron sputtering method, respectively. The structural characteristics were dependent on the structure of substrates. Scanning Electron Microscope (SEM), X-ray Diffraction (XRD) and Atomic Force Microscope (AFM) have been used to analyze structural properties and preferred orientation of AlN thin films. Preferred orientation and SAW characteristic of AlN were improved by insertion of $Al_{2}O_{3}$ buffer layer. Insertion loss of SAW devices using AlN/Si and AlN/$Al_{2}O_{3}$/Si were about 33.27 dB and 30.20 dB, respectively.

• 펄프종이기술
• /
• 제47권6호
• /
• pp.49-56
• /
• 2015

To investigate fiber orientation of Korean traditional paper, Hanji, the fiber arrangements on the surface and cross section of Hanji were observed by scanning electron microscope (SEM). The surface observation showed that the fibers of traditional paper were arranged in vertical and horizontal directions, and those of ssangbal sheet forming were arranged more in vertical direction. The fibers of machine made Hanji and copying paper were usually arranged in vertical direction. As for the observation of cross section of traditional paper, fibers arranged in horizontal direction tended to be increased with the increase of thicknesses. The thick traditional paper have cracks in the middle part of structural section of paper. They were larger in cross section in horizontal direction than in vertical direction. The horizontal arrangement of traditional paper seemed to be about 8% to 14% higher to the vertical arrangement, which is very lower to other papers.

• 대한인간공학회지
• /
• 제24권1호
• /
• pp.19-26
• /
• 2005

Mobile internet access using such devices as PDAs and cellular phones becomes popular as mobile technologies grow. However, the characteristics of small screen devices such as small screen size and pen-based input cause many usability problems. In this study, a human factors experiment was conducted to identify the factors affecting the usability of information search on a PDA. Factors manipulated in the experiment included use of wheel equipment, scroll dimension, and screen orientation. Task completion time, error frequency, and subjective satisfaction level were measured. In addition, various users' behavioral patterns such as scanning routes and mainly used scrolling methods were analyzed. Scroll dimension has a significant effect on task completion time. Scroll equipment and screen orientation affect subjective satisfaction level. The results could be applied to designing information structure of web sites for mobile use by providing vertical scroll and using external scroll equipments.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제50권5호
• /
• pp.216-220
• /
• 2001

Piezoelectric ZnO thin films by Facing Targets Sputtering(FTS) method were deposited on slide glass. The Facing Targets Sputtering system can deposit thin film at plasma-free condition and change the deposition condition in wide range. The characteristics of ZnO thin films changed with power, working pressure and substrate temperature were investigated by XRD(x-ray diffractometer), alpha-step(Tencor) and SEM(Scanning Electron Microscopy) analyses. In the results, we suggest that FTS system is very suitable for the preparation of high quality ZnO thin films with good c-axis orientation.

• 비파괴검사학회지
• /
• 제10권1호
• /
• pp.10-17
• /
• 1990

Recently, object recognition ultrasonic sensor is being used with automatization of industrial machine. Points which characterize the object can be deleted by measuring the propagation time of ultrasonic impulse and azimuth which gives its maximum amplitude, and from these points shape, position and orientation of the object are deduced. A new measuring method is adopted, where the distance to the object is calculated by sound reflection time which is measured from O-cross point of sound wave, and azimuth is measured by angle indicating maximum amplitude. The measuring accuracy of 1.0mm for distance and $0.5-2^{\circ}$ for azimuth have been accomplished. By rotational scanning of sensor the characteristic point of an object can be known and it gives the information of its shape, position and orientation. Experimental results showed that the object of some complicated shape can be recognized, which suggest its applicability to robot.

• 한국표면공학회지
• /
• 제30권2호
• /
• pp.128-135
• /
• 1997

The effect of the polyethyledglycol(PEG) on the surface morphology and crystal orientation of electrodeposited zinc from a chloride (1.5M Zinc+7.0M chloriode) have been studied by means of electrochemical methodes, scanning electron microscopy, surface appearance measurement and X-ray diffraction patterns. The resistance of electrodeposit increased, whereas the evolution of hydrogen decreased with incrasing of molecular weight of the PEG. Large grains of electrodeposit were obtained from bath in the absence of organid additive. When the PEG was added, fine grained crystals were observed and the surface roughness was relatively small, but surface appearance deteriorated. The preferred orientation with a(101) plane parallel to the surface was obtained from the PEG addited bath.