• 제목/요약/키워드: Scan-based test

검색결과 210건 처리시간 0.036초

The tap-scan method for damage detection of bridge structures

  • Xiang, Zhihai;Dai, Xiaowei;Zhang, Yao;Lu, Qiuhai
    • Interaction and multiscale mechanics
    • /
    • 제3권2호
    • /
    • pp.173-191
    • /
    • 2010
  • Damage detection plays a very important role to the maintenance of bridge structures. Traditional damage detection methods are usually based on structural dynamic properties, which are acquired from pre-installed sensors on the bridge. This is not only time-consuming and costly, but also suffers from poor sensitivity to damage if only natural frequencies and mode shapes are concerned in a noisy environment. Recently, the idea of using the dynamic responses of a passing vehicle shows a convenient and economical way for damage detection of bridge structures. Inspired by this new idea and the well-established tap test in the field of non-destructive testing, this paper proposes a new method for obtaining the damage information through the acceleration of a passing vehicle enhanced by a tapping device. Since no finger-print is required of the intact structure, this method can be easily implemented in practice. The logistics of this method is illustrated by a vehicle-bridge interaction model, along with the sensitivity analysis presented in detail. The validity of the method is proved by some numerical examples, and remarks are given concerning the potential implementation of the method as well as the directions for future research.

레이저 스캔 모델의 설계 프로세스 개발 (Development of the Design Process for Laser Scanned Model)

  • 김좌일;왕세명;강의철;이관행
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1029-1034
    • /
    • 2004
  • Recent engineering process requires fast development and manufacturing of the products. This paper mainly discusses the process of rapid product development (RPD) from the reverse engineering to the optimal design. A laser scanning system scans a product and the efficient data processing method reduces the scanned point data. The reduced (scanned) points model is transformed to a finite element model without the construction of a CAD model. Since CAD modeling is a time-consuming work, skipping this step can save much time. This FE model is updated from the result based on the structural characteristics from modal test of the real model. For FE model updating, Response Surface Method is adopted. Finally, the updated FE model is optimized using the reliability-based topology optimization, which is developed recently. All these processes are applied to the design of an upper part model of a cellular phone.

  • PDF

Redundancy TSV 연결 테스트를 위한 래퍼셀 설계 (Wrapper Cell Design for Redundancy TSV Interconnect Test)

  • 김화영;오정섭;박성주
    • 대한전자공학회논문지SD
    • /
    • 제48권8호
    • /
    • pp.18-24
    • /
    • 2011
  • 칩의 적층 기술이 적용된 TSV기반 3D IC로 진화함에 따라 새로운 문제점이 발생하게 되었다. Bonding 이후 다이간 TSV가 제대로 연결되었는지 테스트하지만 Redundnacy TSV에 대해서는 테스트하지 않는다. 그러나 더 높은 수율을 얻기 위해서는 redundancy TSV에 대한 연결 테스트를 수행해야 한다. redundancy TSV의 연결을 테스트하고 진단하여 고장 있는 TSV를 대체함으로써 더 높은 수율을 얻을 수 있다. 본 논문에서는 TSV기반 3D IC에서 다이간의 TSV 연결 테스트뿐 아니라 redundancy TSV 테스트를 위한 래퍼셀을 제안하고자 한다. 제안하는 래퍼셀은 하드웨어로 설계하였을 시 기존의 테스트패턴을 그대로 사용할 수 있고, 소프트웨어 설계 시에는 면적을 최소화할 수 있다.

문화 및 자연 유산의 해석을 위한 3차원 스캔 모델의 가시화 - 공룡발자국의 기록과 해석 사례 (Visualization of 3D Scanned Model for Interpretation of Heritage - Case of Dinosaur Tracks for Documentation and Interpretation)

  • 안재홍;공달용;원광연
    • 한국HCI학회논문지
    • /
    • 제8권1호
    • /
    • pp.19-28
    • /
    • 2013
  • 문화 자연유산 분야에서 3차원 스캐닝 기술은 아직 기록과 보존, 모니터링의 도구로 활용 폭이 제한되어 있으며, 전문가들에 의해 직접 활용되지 못하고 있다. 스캔 데이터의 정밀한 기하 정보는 효과적인 가시화를 통해 전문가들의 과학적 해석을 가능하게 할 수 있다. 본 연구에서는 이를 위해 스캔 모델로부터 필요한 기하 특성을 가시화하는 렌더링 기법들을 분석하고, 스캔 데이터의 가시화 파이프라인과 렌더링 기법 및 이의 분류 체계를 제시하였다. 또한 사례연구로서, 공룡발자국 분야의 기존 연구 방법을 분석하여 문제점을 도출하고, 이에 따라 스캔 모델을 가시화하여 전문가를 대상으로 테스트를 수행하였으며 이를 통해 효과성을 확인하였다. 본 연구는 3차원 스캔 데이터를 이용하여 문화 및 자연유산을 효과적으로 해석할 수 있는 실용적 방안을 제시하였음에 의의가 있다.

  • PDF

갑상샘 스캔 정량분석을 통한 갑상샘 섭취율 동시계측법 연구 (Study of Simultaneous Counting of Thyroid Uptake with Quantitative Analysis of Thyroid Scans)

  • 김정수;김근우
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제46권5호
    • /
    • pp.401-408
    • /
    • 2023
  • Thyroid uptake measurements can be subject to measurement errors due to the scoping and positioning of the thyroid gland. To compensate for these limitations, the clinical utility of the thyroid simultaneous counting method as an alternative to thyroid uptake measurement was analyzed and evaluated experimentally through quantitative analysis of images acquired after thyroid scanning. Experimental data were obtained using a Gamma camera (GE infinia), a thyroid uptake system (KOROID 1), and a thyroid neck phantom. Based on the thyroid uptake rate of 1-5% according to the protocol of thyroid scan test (99mTcO4 - , 370 MBq) in normal results, 99mTcO4 - was set in the range of 3.7-18.5 MBq (Matrix: 256×256, Scan time: 1 min, collimator: pin hole, phantom-collimator distances: 7 cm). The acquired images were corrected for the attenuation of isotopes due to the set-up time and half-life by applying the Auto Region of interest (ROI) drawing system, and the significance of the experimental results was evaluated by Multiple linear regression analysis (SPSS, ver. 22, IBM). The thyroid uptake rate showed a significant correlation between the dose and the measured counts when using the thyroid uptake system equipment. Meanwhile, the quantitative analysis counts of phantom images using Gamma camera also showed a significant correlation. Thus confirmed that the correlation between these two experiments was statistically significant (P<0.05). The simultaneous counting protocol, which indirectly measures thyroid uptake from thyroid scans, is likely to be clinically relevant if complemented by additional studies with different variables in patients with thyroid disease.

PET/CT 검사에서 시간 입력 차이에 따른 표준화섭취계수(SUV) 변화에 대한 고찰 (The study on Standard Uptake Value(SUV) change according to time input difference in PET/CT scan)

  • 김경식;이주영;정우영;김정선
    • 핵의학기술
    • /
    • 제15권2호
    • /
    • pp.21-25
    • /
    • 2011
  • PET/CT 검사 시 주사실 근무자의 주사 시간의 입력과 PET 검사실 근무자의 검사 시작 시간의 오차가 발생할 수 있으며 이러한 시간 입력의 오차는 반정량적 평가 방법으로 사용되고 있는 표준화섭취계수(이하 SUV) 값에 영향을 줄 수 있다. 이에 시간 입력 차이에 따른 SUV의 변화를 분석하고 시간 동기화의 필요성을 알아보고자 한다. $^{18}F$-FDG Fusion Whole Body PET 검사를 시행한 환자 중 성인 30명을 대상으로 연구 분석하였다. 시간 차이에 따른 SUV의 변화를 분석하기 위해 1, 2, 3, 5, 10, 20분의 시간 오차를 주어 영상을 재구성하였다. 각각의 재구성한 영상은 liver, aorta, primary lesion에서 ROI를 설정하여 SUV를 측정하였다. 환자 30명의 영상을 각각 1, 2, 3, 5, 10, 20분의 오차를 주어 재구성한 영상과 기존의 시간을 입력한 영상의 SUV를 비교 분석하였다. liver의 mean SUV는 1, 2, 3, 5, 10, 20분에서 각각 1.6, 2.5, 3.0, 4.2, 6.6, 12.8%, aorta의 mean SUV는 각각 0.3, 1.1, 1.4, 3.2, 4.7, 12.5%, lesion의 max SUV는 각각 1.0, 1.5, 2.2, 3.5, 6.6, 12.8%의 차이를 확인 할 수 있었다. SUV를 보다 정확하게 측정하기 위해서 이러한 오차를 최소화 하려는 노력을 해야 하며 그 중 시간 동기화는 정확한 검사를 하기위한 노력의 초석이 될 수 있을 것으로 사료된다.

  • PDF

바나나를 이용한 식빵의 품질특성 (Quality Characteristics of White Pan Bread with Banana)

  • 최익준
    • 한국조리학회지
    • /
    • 제22권2호
    • /
    • pp.78-92
    • /
    • 2016
  • 본 연구는 바나나 첨가에 따른 식빵의 품질 특성을 알아보고자 하였다. 반죽의 mixograph와 stickiness, 발효율, TPA, 비용적, 영상분석, 색도, 수분함량, 기호도 검사를 통하여 분석하였다. Mixograph의 peak time(min)는 모든 시료가 4~5분을 나타냈지만, peak value(%)의 경우 CON, B10, B20 시료가 60% 이상, B30, B40이 60% 이하를 나타냈다. Stickiness 측정결과, 바나나 첨가량이 늘어나면서 점착력이 낮아짐을 알 수 있었다. 발효율은 전반적으로 증가하였으나, B40 시료의 경우 75분 이후에는 감소하는 경향을 보였다. 껍질과 속질의 색도 측정결과, 명도 L값은 CON이 가장 높았고, 적색도 a값은 B40이 가장 높았으며, 황색도 b값 역시 B40이 가장 높았다. pH 측정 결과, B40이 가장 낮은 수치를 보였고, 바나나 첨가량이 많을수록 pH가 낮아지는 경향을 보였다. 바나나 첨가가 제품의 부피와 비용적에는 부정적인 영향을 끼치는 것을 알 수 있었으며, crumbScan을 통한 영상분석 결과, 껍질두께, 기공의 찌그러짐에서 유의한 차이는 나타나지 않았다. 반면, 기공의 조밀도에서는 CON의 값이 774.33으로 가장 낮았으며, B40의 값이 927.66으로 가장 높게 나타났다. Hardness는 유의한 차이를 보이며 B40이 가장 낮았고, 대조구가 가장 높았다. 수분함량은 전체적으로 유의한 차이가 있었고, CON의 값이 가장 높았으며, 바나나 첨가량이 늘어남에 따라서 그 값이 줄어드는 것을 확인할 수 있다. 관능검사 중 기호도 검사 결과, B20이 가장 높은 평가를 받았고, B40은 전체적 기호도에서 가장 좋지 않게 나타났다. 특성차이 검사결과, 바나나 첨가량이 부피를 크게 하는데 부정적인 영향을 끼친다는 것을 확인할 수 있었다. 전반적인 품질특성 결과와 관능검사 결과에 따르면, 바나나를 20% 첨가하는 것이 품질과 기호도 측면에서 최적이라 사료된다.

복합 적층 박판의 열응력 파손에 대한 진동 활용 비파괴평가 (Vibration-Based Nondestructive Evaluation of Thermal Stress-Induced Damage in Thin Composite Laminates)

  • 이성혁;최낙삼;이정기
    • 비파괴검사학회지
    • /
    • 제19권5호
    • /
    • pp.347-355
    • /
    • 1999
  • 두께 1mm의 얇은 복합적층판의 자유경계단부에서 열응력으로 인해 발생하는 미세손상을 진동거동과 관련된 비파괴평가의 가능성을 연구하였다. 유한요소 열응력해석을 통해 예상되는 손상발생영역을 초음파 C-스캔과 광학현미경을 이용하여 관찰하였다. 사인 스웝시험을 이용한 적증보 시험편의 횡진동 해석결과, 미세한 내부손상으로 인해 고유주파수가 확실히 감소하였으며 감쇠비도 상당히 증가하였다. 길이가 짧은 적층보 시험편과 2차 모드의 공진주파수를 이용하여 얇은 적층판에서 열응력으로 유기된 미세손상을 매우 민감하게 평가할 수 있음을 알았다.

  • PDF

초음파법에 의한 폭발접합 이종금속 접합품질 판정레벨 설정에 관한 연구 (Ultrasonic Test Criterion for the Explosively Welded Fe-Naval Brass Bonding Quality)

  • 장영권;백영남
    • Journal of Welding and Joining
    • /
    • 제19권1호
    • /
    • pp.40-48
    • /
    • 2001
  • An ultrasonic test method, as a nondestructive test is applied to ensure the clad interface quality assessment. According to the reference codes and standards, not only korea Industrial Standard(KS) but also American Society for Testing and Materials (ASTM) Standard, ultrasonic examination procedures use the pulse-echo, A-scan, back reflection signal drop method and/or side drilled reference hole used to establish the acceptance criteria of clad material test. But the variety of bonding materials and sizes makes it difficult to produce the reference blocks, or thus the criteria. In order to overcome these practical difficulties, new ultrasonic testing criterion is suggested. In this new method, the theoretical interface reflection signal amplitude level is calculated and suggested as an acceptance criteria with the back reflection signal set to 100% FSH(Full Screen Height) which is based on acoustic impedance mismatch at the clad interface for the explosive clad ultrasonic inspection. Applicability of suggested criterion, for the explosive clad Fe-Naval Brass with different bonding quality is confirmed to the pre-existed KS and ASTM specifications and verified by using SEM (Seanning Electron Microscope) micrograph. The results obtained by the suggested method is more conservative than the results according to the KS B 0234 and ASTM A 578 specifications The suggested method could be applicable to any other combination of explosive clad ultrasonic inspection.

  • PDF

순서회로를 위한 경계면 스캔 구조에서의 지연시험 연구 (A Study of Delay Test for Sequential circuit based on Boundary Scan Architecure)

  • 이창희;김정환;윤태진;남인길;안광선
    • 한국정보처리학회논문지
    • /
    • 제5권3호
    • /
    • pp.862-872
    • /
    • 1998
  • 본 논문에서는 경계면 스캔 구조에서의 클럭 입력을 갖는 순서회로를 위한 지연시험 구조와 지연시험 절차를 개발하였다. 지연시험 대상회로가 클럭 입력을 갖는 순서회로일 경우, 기존의 경계면 스캔 구조에서의 지연시험은 중복패턴의 입력, 클럭 입력과 데이터 입력과의 시간 간격과, 패턴 입력과 응답값 캡쳐까지의 시간 문제에 의해 적절치 않음을 보였다. 본 논문에서 제안하는 ARCH-S는 클럭 카운팅 기술을 이용하여 정해진 수의 클럭을 대상회로의 클럭 입력선에 적용시킴으로써 대상회로에 입력되는 입력 패턴의 중복을 피할 수 있다. 또한 대상회로를 정상 속도에서 동작할 수 있도록 시스템 클럭을 TCK로 사용한다. 연속적인 클럭 발생에 TCK를 사용함으로써 대상회로를 정상 속도에서 검증할 수 있다. 제안된 ARCH-S 구조는 시뮬레이션을 통해 동작의 정확성과, 기존의 구조와 비교하여 향상된 성능을 가짐을 확인하였다.

  • PDF