• 대한방사선기술학회지:방사선기술과학
• /
• 제32권3호
• /
• pp.299-306
• /
• 2009

MDCT의 시간분해능 향상과 등방성 해상능(isotrophic resolution) 영상의 획득, 그리고 지능적인 심전도 동조를 바탕으로 하여 심혈관 질환의 효과적인 진단검사로 인정받고 있는 후향적 심전도 동조화(retrospective ECG gating) 하의 coronary CT angiography는 상대적으로 많은 환자선량을 제공함으로 인해 우수한 진단방법으로서의 장점을 반감시키고 있다. 이에 각 장치 제조사에서는 환자선량을 감소시키는 방법의 연구가 활성화되어 왔으며, 이의 일환으로 지능적인 cardiac dose modulation 기술과 전향적 심전도 동조화(prospective ECG gating)를 사용한 sequential scan이 도입되고 있다. 이에 본 연구에서는 64 채널 MDCT에서 54 kg, 163 cm인 여성 인체모형팬텀을 대상으로 하고 형광유리선량계를 사용하여 후향적 심전도 동조화 하의 coronary CT angiography 프로토콜에서 환자선량의 정량적 평가와 환자선량 감소를 위해 본원에서 선택적으로 적용하고 있는 5가지 검사 프로토콜을 적용하였을 경우의 effective dose와 중요 부위의 organ dose를 측정 비교하여 다음과 같은 결과를 얻었다. 1) Dose modulation없이 120 kVp와 210 mAs의 노출조건으로 retrospectively ECG gated helical scan으로 시행한 conventional coronary CT angiography 프로토콜의 effective dose는 17.8 mSv였으며, 심장의 organ dose는 103.8 mGy였다. 2) 관전압을 120 kVp에서 100 kVp로 낮추었을 경우 effective dose는 11.0 mSv로 conventional coronary CT에 비해 38.2%가 감소하였으며, 심장은 67.3 mGy로 45.2%가 감소하였다. 3) Cardiac dose modulation을 적용한 경우 effective dose는 13.3 mSv로 conventional coronary CT에 비해 25.3%가 감소하였으며, 심장은 80.0 mGy로 22.9%가 감소하였다. 4) 100 kVp의 저관전압과 cardiac dose modulation을 적용한 경우 effective dose는 8.1 mSv로 conventional coronary CT angiography에 비해 54.5%가 감소하였으며, 심장은 49.5 mGy로 52.3%가 감소하였다.

• 한국콘텐츠학회논문지
• /
• 제15권6호
• /
• pp.290-296
• /
• 2015

본 연구는 일개병원에서 시행된 년간 소아 두부 CT 검사에 대한 CT 선량지표(CTDI)를 국내 진단참고 준위와 비교하여 분석함으로써 제안점을 도출하고 피폭 방사선량 저감화 방안을 제시하고자 하였다. 이를 위하여 2014년 1월부터 12월까지 두부 손상으로 소아 두부 CT 검사를 의뢰 받은 10세 미만의 소아 231명을 후향적으로 조사하였다. 조사 방법은 선량 보고서와 의료전자차트를 참조하여 일반적 특성, 관전압(kVp), 관전류(mA), 검사 범위, $CTDI_{vol}$, DLP를 조사하여 분석하였다. 결과적으로 $CTDI_{vol}$은 전체 연구대상자의 7.4%(17명)가 국내 진단참고준위를 초과한 것으로 나타났으며 DLP의 경우 41.6%(96명)가 초과 되어 $CTDI_{vol}$ 보다 비교적 높게 나타났다. DLP는 한국식품의약품안전처에서 제시한 CT 선량 지표보다 대부분 약 60% 이상 초과되었으며 건강보험심사평가원에서 제시한 기준 검사 범위보다 약 30%이상 증가된 검사 범위가 DLP가 높게 나타난 원인으로 분석되었다. 결론적으로 임상에서 CT 검사 시 건강보험심사 평가원에서 제시하는 소아 두부 CT 검사의 기준 검사 범위를 준수하여 검사하고 프로토콜을 적절히 조절한다면 피폭선량을 상당히 낮출 수 있을 것으로 판단된다.

• 한국생활과학회지
• /
• 제24권2호
• /
• pp.255-266
• /
• 2015

In this study, we have developed the ergonomic pattern from the 3D human body reflecting cycling posture and extensibility of the stretch fabrics. Adjusting pressure level in the construction of athlete's tight-fitting stretch garments by reducing the original pattern is a challenging subject, which influence on the performance of the wearer directly. Therefore, in this study, relationships between the reduction rates of the 2D pattern obtained from the 3D human scan and resultant clothing pressure were explored to improve the fit and pressure exerted by reduced clothing pattern. Subjective wear sensations of the experimental garments were rated using a seven-point Likert scale on two consecutive days. While wearing the garments, subjects were asked to take five different postures including waist flexion, sitting and others. A Likert-type scale was used for the evaluation, with 7 points indicating the best fit in tight-fitting pants. Comparing 2/3T-pattern with T-pattern, the latter was superior to 2/3T-pattern in terms of adhere well to the waist and hip area in the 0.032 significance level. T-pattern was superior to 2/3T-pattern in terms of fitting and wear comfort. As results, the pattern obtained from the flexed body reflecting cycling posture already included the contraction and extension of the skin while cycling posture, so that the extra ease for movement and good fit was not need to be considered. The optimized reduction rates were determined with the proposed reduction rate, the resultant pressure range was within the range of $0.5{\sim}3.0gf/cm^2$ at eight locations on the body except front waist band and thigh band.

• Radiation Oncology Journal
• /
• 제31권1호
• /
• pp.41-47
• /
• 2013

Purpose: To describe the early experience of analyzing variations and time trends in bladder volume of the rectal cancer patients who received bladder ultrasound scan. Materials and Methods: We identified 20 consecutive rectal cancer patients who received whole pelvic radiotherapy (RT) and bladder ultrasound scan between February and April 2012. Before simulation and during the entire course of treatment, patients were scanned with portable automated ultrasonic bladder scanner, 5 times consecutively, and the median value was reported. Then a radiation oncologist contoured the bladder inner wall shown on simulation computed tomography (CT) and calculated its volume. Results: Before simulation, the median bladder volume measured using simulation CT and bladder ultrasound scan was 427 mL (range, 74 to 1,172 mL) and 417 mL (range, 147 to 1,245 mL), respectively. There was strong linear correlation (R = 0.93, p < 0.001) between the two results. During the course of treatment, there were wide variations in the bladder volume and every time, measurements were below the baseline with statistical significance (12/16). At 6 weeks after RT, the median volume was reduced by 59.3% to 175 mL. Compared to the baseline, bladder volume was reduced by 38% or 161 mL on average every week for 6 weeks. Conclusion: To our knowledge, this study is the first to prove that there are bladder volume variations and a reduction in bladder volume in rectal cancer patients. Moreover, our results will serve as the basis for implementation of bladder training to patients receiving RT with full bladder.

• 한국정보통신학회논문지
• /
• 제26권7호
• /
• pp.996-1003
• /
• 2022

본 논문에서는 비전 기반의 1-D 바코드 검출을 위한 스캔 라인 및 범위 결정을 위한 새로운 방법을 제시한다. 블록 HOG(histogram of gradient)를 바탕으로 DBSCAN 군집화 방법을 적용하여 유효한 바코드 대표점 및 방향을 검출하고 이를 바탕으로 스캔 라인 및 바코드 크로스라인을 결정하는 방법에 관한 연구이다. 본 논문에서는 얻어진 스캔라인을 바탕으로 바코드의 크로스라인 범위를 결정하기 위해 최소 및 최대탐색 기법이 적용되었다. 이것은 바코드의 크기에 무관하게 적용될 수 있다. 제안된 기법은 바코드의 일부 영역만 검출해도 바코드 인식이 가능하며, 또한 바코드 영역 검출 후 코드를 읽기 위해 회전을 필요로 하지 않는다. 또한, 다양한 크기의 바코드 검출이 가능하다. 본 논문의 제안된 기법에 대한 성능을 평가를 위해 다양한 실험결과를 제시하였다.

• 대한기계학회논문집A
• /
• 제29권12권
• /
• pp.1653-1659
• /
• 2005

In this study, the performance of a DPRMs is evaluated and the measurement precision for the pile driving is presented. The DPRMs is a visual-measurement system for the pile rebound and the penetration movement using a high speed line-scan camera. The DPRMs generates the measurement deviation. It is caused by the strong impact for the pile driving. To reduce it, the vibration signal analysis about the pile driving is performed. As a result, it is confirmed that the tilting frequency of a camera-tripod structure corresponding to excitation frequency range of the ground is under 40Hz. Through the structure modification, the camera-tripod structure is redesigned to the model being free itself from the excitation frequency range of the ground. By the verification testing about the improvement effects, it is inspected that the tilting and measurement deviation of the redesigned DPRMs are reduced.

• 한국초전도ㆍ저온공학회논문지
• /
• 제4권2호
• /
• pp.5-10
• /
• 2002

Deposition condition of NiO that is one of Possible buffer layers for YBCO coated conductors was studied. NiO was deposited on textured Ni substrates by a MOCVD (metal-organic chemical vapor deposition) method. The degree of texture, and the surface roughness were analyzed by X-ray Pole figure, atomic force microscope and scanning electron microscope. The (111) and (200) textures were competitively developed , depending on an oxygen partial Pressure(PO2) and deposition temperature (Tp). The (200) textured NiO layer was deposited at Tp=450~47$0^{\circ}C$ and PO2= 1.67 Torr Out-of-Plane ($\omega$-scan) and in-plane ($\Phi$-scan) textures of the (200) NiO films were as good as 10.34$^{\circ}$ and 10.00$^{\circ}$ respectively The AFM surface roughness of NiO was in the range of 3~4.5 nm at PO2=0.91~3.34 Torr and at Tp=47$0^{\circ}C$ , and in the range of 3~13 nm at TP=450~53$0^{\circ}C$ and at PO2=1.67 Torr.

• 치과방사선
• /
• 제28권1호
• /
• pp.17-26
• /
• 1998

The purpose of this study was to investigate whether a radiographic estimate of osseous fractal dimension is useful in the characterization of structural changes in bone. Ten specimens of bone were progressively decalcified in fresh 50 ml solutions of 0.1 N hydrochloric acid solution at cummulative timed periods of 5, 10, 20, 30, 60 and 90 minutes, and radiographed from 0 degree projection angle controlled by intraoral parelleling device. The test set of 70 radiographs was digitized and digitally filtered to reduce film -grain noise. I performed one-dimensional variance and fractal analysis of bony profiles or scan lines. Correlation analysis quantified the relationship between variance and fractal dimension. The obtained results were as follow. 1. After the first stage of decalcification variance and fractal dimension of scan line pixel intensities generally decreased with a range of 57.94 to 12.64 and 1.59 to 1.36. 2. Correlation coefficient(r) relating variances to fractal dimensions was consistantly excellent(range r=0.90 to 0.98). 3. Variance and fractal dimension were much alike in ability to discriminate, at leat on a group basis, between control and decalcified specimens.

• Journal of Welding and Joining
• /
• 제21권2호
• /
• pp.102-110
• /
• 2003

A visual sensor consisted of polygonal mirror, laser, and CCD camera was proposed to measure the distance to the weld joint for recognizing the joint shape. To scan the laser beam of the sensor onto an object, 8-facet polygonal mirror was used as the rotating mirror. By locating the laser and the camera at axi-symmetrical positions around the mirror, the synchronized-scan condition could be satisfied even when the mirror was set to rotate through one direction continuously, which could remove the inertia effect of the conventional oscillating-mirror methods. The mathematical modelling of the proposed sensor with the optical triangulation method made it possible to derive the relation between the position of an image on the camera and the one of a laser light on the object. Through the geometrical simulation of the proposed sensor with the principal of reflection and virtual image, the optical path of a laser light could be predicted. The position and direction of the CCD camera were determined based on the Scheimpflug's condition to fit the focus of any image reflected from an object within the field of view. The results of modelling and simulation revealed that the proposed visual sensor could be used to recognize the weld joint and its vicinity located within the range of the field of view and the resolution. (Received February 19, 2003)

• Journal of Electrochemical Science and Technology
• /
• 제3권2호
• /
• pp.80-84
• /
• 2012

The polyaniline (PANI) electrodes are prepared by chemical synthesis and electrodeposition methods and their supercapacitive properties are characterized and compared by morphology observation, cyclic voltammetry as a function of scan rate, and impedance spectra analysis. In particular, the supercapacitive properties obtained in the range of higher potential scan rates (e.g., over $200mV\;s^{-1}$) are emphasized to be capable of utilizing adequately the high power capability of supercapacitor. As a result, the PANI electrode by the electrodeposition shows superior specific capacitance (max. $474F\;g^{-1}$ at $10mV\;s^{-1}$ and about $390F\;g^{-1}$ at $500mV\;s^{-1}$) than those by the chemical synthesis method. This is mainly due to highly porous structure obtained by the electrodeposition to yield higher specific surface area.