• Journal of Biomedical Engineering Research
• /
• v.27 no.6
• /
• pp.323-331
• /
• 2006

The purpose of this study was to investigate the effect of performing a cognitive task during treadmill walking on the stride rate variability. Ten university students(age $24.0{\pm}0.25$, height $172{\pm}3.1cm$, weight $66{\pm}5.3kg$) were participated in dual task experiments which consist of both walking alone and walking with a cognitive task. Two-back task was selected for the cognitive task since it did not have learning effect during the experimental procedure.3D motion analysis system was used to measure subject's position data by changing walking speed with 4.8, 5.6, 6.4, 6.8, and 7.2 km/hr. Stride rate was calculated by the time between heel contact and heel contact. Accuracy rate of a cognitive task during walking, coefficient of variance, allometric scaling methods and Fano factor were used to estimated the stride rate variability. As the walking speed increased, accuracy rate decreased and the logarithmic value of Fano factor increased which showed the statistical difference. Thus it can be concluded that the gait control mechanism is distracted by the secondary attention focus which is the cognitive task ie. two-back task. Further study is needed to clarify this by increasing the number of subject and experiment time.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.304-309
• /
• 2002

We propose the computation reduction method of real root method that is mainly used in the CELP (Code Excited Linear Prediction) vocoder. The real root method is that if polynomial equations have the real roots, we are able to find those and transform them into LSP. However, this method takes much time to compute, because the root searching is processed sequentially in frequency region. In this paper, to reduce the computation time of real root, we compare the real root method with two methods. In first method, we use the mal scale of searching frequency region that is linear below 1 kHz and logarithmic above. In second method, The searching frequency region and searching interval are ordered by each coefficient's distribution. In order to compare real root method with proposed methods, we measured the following two. First, we compared the position of transformed LSP (Line Spectrum Pairs) parameters in the proposed methods with these of real root method. Second, we measured how long computation time is reduced. The experimental results of both methods that the searching time was reduced by about 47% in average without the change of LSP parameters.

• Journal of KSNVE
• /
• v.6 no.2
• /
• pp.163-177
• /
• 1996

An investigation on thermohydraulic stability of flow oscillations in the CANada Deuterium Uranium-600(CANDU-6) heat transport system has been conducted. Flow oscillations in reactor coolant loops, comprising two heat sources and two heat sinks in series, are possibly caused by the response of the pressure to extraction of fluid in two-phase region. This response consists of two contributions, one arising from mass and another from enthalpy change in the two-phase region. The system computer code used in the investigation os SOPHT, which is capable of simulating steady states as well as transients with varying boundary conditions. The model was derived by linearizing and solving one-dimensional, homogeneous single- and two-phase flow conservation equations. The mass, energy and momentum equations with boundary conditions are set up throughout the system in matrix form based on a node-link structure. Loop stability was studied under full power conditions with interconnecting the two compressible two phase regions in the figure-of-eight circuit. The dominant function of the interconnecting pipe is the transfer of mass between the two-phase regions. Parametric survey of loop stability characteristics, i. e., damping ratio and period, has been made as a function of geometrical parameters of the interconnection line such as diameter, length, height and orifice flow coefficient. The stability characteristics with interconnection line has been clarified to provide a simple criterion to be used as a guide in scaling of the pipe.

• Journal of Korean society of Dental Hygiene
• /
• v.15 no.1
• /
• pp.111-118
• /
• 2015

Objectives: The aim of the study is to investigate the health belief model affecting the oral health behavior in middle and high school students. Methods: The subjects were 296 middle and high school students in Seoul, Gyeonggi and Incheon from February 15 to March 21, 2014. The students filled out the self-reported questionnaires after receiving informed consents. The instrument was adopted and revised from those of Kim & Hwang, and Choi & Joo. The questionnaire consisted of 4 questions of general characteristics, 9 questions of oral health status including subjective oral health status, frequency of tooth brushing, duration of tooth brushing, method of tooth brushing, use of oral health devices, dental clinic visit, scaling services, snack intake, and smoking. The oral health belief consisted of 25 questions including susceptibility, seriousness, barriers, benefit, and self-efficacy using Likert 5 scale. The reliability of Cronbach's alpha in the study was 0.725. Data were analyzed using SPSS ver 18.0 for frequency analysis, t-test, ANOVA, ${\chi}^2$-test, and Pearson's correlation coefficient, simple regression, and binary logistic regression. Results: Oral health beliefs of middle and high school students affected the oral health behaviors. Susceptibility, barriers and self-efficacy also influenced on the oral health behaviors. In order to provide the best oral health education, susceptibility and self-efficacy are the primary factors to increase motivation because the motivation endows the students with correction of oral health behaviors that improve the knowledge, attitudes, and decrease barriers in oral hygiene. Conclusions: It is important to correct oral health behaviors in the middle and high school students by providing the continuing and systematic oral health education.

• Journal of Korean society of Dental Hygiene
• /
• v.14 no.4
• /
• pp.547-553
• /
• 2014

Objectives : This research aims to analyze the relationship between the state of mental illness and oral health management of mental patients in mental health care institutions. Methods : The data were randomly selected from 474 patients in mental health care institutions. and analyzed by SPSS WIN 12.0 program. Results : Schizophrenia accounted for 79.5%(337 patients) ; alcohol dependency, 5.3%(25 patients) ; mental retardation, 2.7%(13 patients) ; mental development disorder, 3.0%(14 patients) ; mental delusion and dementia, 7.6%(36 patients). Those who were in 40s had the highest dental caries of 3.95 and the highest remaining teeth of 26.76 were shown in the 20s. The correlation between remaining teeth and mental retardation was the highest, measuring 22.38(p<.05). Those who were in 70s had the serious periodontal condition that accounted for 41.3%(12 patients)(p<.05). The correlation coefficient for all factors-dental caries, remaining teeth, need for scaling, and periodontal condition-between mental illness condition and oral health were all positive(p <.05). The regression analysis resulted in the formula Y(mental health condition)=2.999+0.166(dental aries)-0.028(remaining teeth). Conclusions : Those who had mental illness had very poor and serious dental caries and periodontal diseases, so it is necessary to manage the dental health care for the mentally ill patients.

• The Journal of the Korea Contents Association
• /
• v.7 no.3
• /
• pp.9-16
• /
• 2007

This paper describe methodology that is distributed on 2-dimensional plane to much high-dimensional facial motion datas using Isomap algorithm, and user interface techniques to control facial expressions by selecting expressions while user navigates this space in real-time. Isomap algorithm is processed of three steps as follow; first define an adjacency expression of each expression data, and second, calculate manifold distance between each expressions and composing expression spaces. These facial spaces are created by calculating of the shortest distance(manifold distance) between two random expressions. We have taken a Floyd algorithm for it. Third, materialize multi-dimensional expression spaces using Multidimensional Scaling, and project two dimensions plane. The smallest adjacency distance to define adjacency expressions uses Pearson Correlation Coefficient. Users can control facial expressions of 3-dimensional avatar by using user interface while they navigates two dimension spaces by real-time.

• Animal Bioscience
• /
• v.37 no.4
• /
• pp.591-599
• /
• 2024

Objective: Sumba Ongole (SO) cattle are valuable breed due to their important role in the development of Indonesian cattle. Despite rapid advances in molecular technology, no genomic studies on SO cattle have been conducted to date. The aim of this study is to provide genomic profile related to the population diversity, admixture, and demographic trends of SO cattle. Methods: Genomic information was gathered from 79 SO cattle using the Illumina Bovine SNP50 v3 Beadchip, and for comparative purposes, additional genotypes from 209 cattle populations worldwide were included. The expected and observed heterozygosity, inbreeding coefficient, pairwise fixation indices between-population, and Nei's genetic distance were examined. Multidimensional scaling, admixture, and treemix analyses were used to investigate the population structure. Based on linkage disequilibrium and effective population size calculations, the demographic trend was observed. Results: The findings indicated that the genetic diversity of SO cattle was similar to that of other indicine breeds. SO cattle were genetically related to indicines but not to taurines or Bali cattle. The study further confirmed the close relationship between SO, Ongole, and Nellore cattle. Additionally, a small portion of the Ongole mixture were identified dominant in the SO population at the moment. The study also discovered that SO and Bali cattle (Bos javanicus) could have been ancestors in the development of Ongole Grade cattle, which corresponds to the documented history of Ongolization. Our finding indicate that SO cattle have maintained stability and possess unique traits separate from their ancestors. Conclusion: In conclusion, the genetic diversity of the SO cattle has been conserved as a result of the growing significance of the present demographic trend. Consistent endeavors are necessary to uphold the fitness of the breed.

• Yonsei Medical Journal
• /
• v.63 no.8
• /
• pp.724-734
• /
• 2022

Purpose Hereditary parkinsonism genes consist of causative genes of familial Parkinson's disease (PD) with a locus symbol prefix (PARK genes) and hereditary atypical parkinsonian disorders that present atypical features and limited responsiveness to levodopa (non-PARK genes). Although studies have shown that hereditary parkinsonism genes are related to idiopathic PD at the phenotypic, gene expression, and genomic levels, no study has systematically investigated connectivity among the proteins encoded by these genes at the protein-protein interaction (PPI) level. Materials and Methods Topological measurements and physical interaction enrichment were performed to assess PPI networks constructed using some or all the proteins encoded by hereditary parkinsonism genes (n=96), which were curated using the Online Mendelian Inheritance in Man database and literature. Results Non-PARK and PARK genes were involved in common functional modules related to autophagy, mitochondrial or lysosomal organization, catecholamine metabolic process, chemical synapse transmission, response to oxidative stress, neuronal apoptosis, regulation of cellular protein catabolic process, and vesicle-mediated transport in synapse. The hereditary parkinsonism proteins formed a single large network comprising 51 nodes, 83 edges, and three PPI pairs. The probability of degree distribution followed a power-law scaling behavior, with a degree exponent of 1.24 and a correlation coefficient of 0.92. LRRK2 was identified as a hub gene with the highest degree of betweenness centrality; its physical interaction enrichment score was 1.28, which was highly significant. Conclusion Both PARK and non-PARK genes show high connectivity at the PPI and biological functional levels.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.6
• /
• pp.794-802
• /
• 2018

The ice resistance series charts for icebreaking ships were developed through a series of systematic model tests in the ice tank of the Korean Research Institute of Ship and Ocean Engineering (KRISO). Spencer's (1992) component-based scaling system for ship-ice model tests was applied to extend the model ship correlations. Beam to draft ratio (B/T), length to beam ratio (L/B), block coefficient ($C_B$) and stem angle (${\alpha}$) were selected as geometric parameters for hull form development. The basic hull form (S1) of twin pod type with B/T of 3.0, L/B of 6.0, $C_B$ of 0.75 and stem angle of $25^{\circ}$ was generated with a modern hull design concept. A total of 13 hulls were designed varying the geometric parameters; B/T of 2.5 and 3.5, L/B of 5.0 and 7.0, $C_B$ from 0.65 to 0.85 in intervals of 0.05, and 5 stem angles from $15^{\circ}$ to $35^{\circ}$. Ice resistance tests were first carried out with the basic hull form in level ice with suitable speed. Four more tests for $C_B$ variations from 0.65 to 0.85 were conducted and two more for beam to draft and length to beam ratios were also performed to study the effect of the geometric parameters on ice resistance. Ice resistance tests were summarized using the volumetric coefficient, $C_V$ ($={\nabla}/L^3$), instead of L/B and $C_B$ variations. Additional model tests were also carried out to account for the effect of the stem angle, ice thickness and ice strength on ice resistance. In order to develop the ice resistance series charts with a minimum number of experiments, the trends of the ice resistance obtained from the experiments were assumed to be similar for other model ship with different geometric parameters. A total of 18 sheets composed of combinations of three different beam to draft ratios and six block coefficients were developed as a parameter of $C_V$ in the low speed regions. Three correction charts were also developed for stem angles, ice thickness and ice strength respectively. The charts were applied to estimate ice resistance for existing icebreaking ships including ARAON, and the results were satisfactory with reasonable accuracy.

• Korean Journal of Mineralogy and Petrology
• /
• v.33 no.3
• /
• pp.273-291
• /
• 2020

The strength characteristics of the three orthogonal splitting planes, known as rift, grain and hardway planes in granite quarries, were examined. R, G and H specimens were obtained from the block samples of Jurassic granites in Geochang and Hapcheon areas. The directions of the long axes of these three specimens are perpendicular to each of the three planes. First, The chart, showing the scaling characteristics of three graphs related to the uniaxial compressive strengths of R, G and H specimens, were made. The graphs for the three specimens, along with the increase of strength, are arranged in the order of H < G < R. The angles of inclination of the graphs for the three specimens, suggesting the degree of uniformity of the texture within the specimen, were compared. The above angles for H specimens(θ^H, 24.0°~37.3°) are the lowest among the three specimens. Second, the scaling characteristics related to the three graphs of RG, GH and RH specimens, representing a combination of the mean compressive strengths of the two specimens, were derived. These three graphs, taking the various N-shaped forms, are arranged in the order of GH < RH < RG. Third, the correlation chart between the strength difference(Δσ_t) and the angle of inclination(θ) was made. The above two parameters show the correlation of the exponential function with an exponent(λ) of -0.003. In both granites, the angle of inclination(θ^RH) of the RH-graph is the lowest. Fourth, the six types of charts, showing the correlations among the three kinds of compressive strengths for the three specimens and the five parameters for the two sets of microcracks aligned parallel to the compressive load applied to each specimen, were made. From these charts for Geochang and Hapcheon granites, the mean value(0.877) of the correlation coefficients(R²) for total density(Lt), along with the frequency(N, 0.872) and density(ρ, 0.874), is the highest. In addition, the mean values(0.829) of correlation coefficients associated with the mean compressive strengths are more higher than the minimum(0.768) and maximum(0.804) compression strengths of three specimens. Fifth, the distributional characteristics of the Brazilian tensile strengths measured in directions parallel to the above two sets of microcracks in the three specimens from Geochang granite were derived. From the related chart, the three graphs for these tensile strengths corresponding to the R, G and H specimens show an order of H(R1+G1) < G(R2+H1) < R(R1+G1). The order of arrangement of the three graphs for the tensile strengths and that for the compressive strengths are mutually consistent. Therefore, the compressive strengths of the three specimens are proportional to the three types of tensile strengths. Sixth, the values of correlation coefficients, among the three tensile strengths corresponding to each cumulative number(N=1~10) from the above three graphs and the five parameters corresponding to each graph, were derived. The mean values of correlation coefficients for each parameter from the 10 correlation charts increase in the order of density(0.763) < total length(0.817) < frequency(0.839) < mean length(Lm, 0.901) ≤ median length(Lmed, 0.903). Seventh, the correlation charts among the compressive strengths and tensile strengths for the three specimens were made. The above correlation charts were divided into nine types based on the three kinds of compressive strengths and the five groups(A~E) of tensile strengths. From the related charts, as the tensile strength increases with the mean and maximum compressive strengths excluding the minimum compressive strength, the value of correlation coefficient increases rapidly.