• 대한기계학회논문집
• /
• 제11권3호
• /
• pp.528-536
• /
• 1987

본 연구에서는 간헐적인 유동에 의거한 체적 대류 모델을 설정하고, 구배 확 산 모델에 유동장의 중심부와 외부에서 서로 다른 무게값을 부여하는 혼성 확산 모델 (hybrid diffusion model)을 제안하며, 이 모델을 검증하기 위한 첫 단계로서 평면 제 트 유동에 대하여 수치 계산을 수행하다. 여기에는 간헐도에 대한 난류 전달 방정식 이 필요한데 이 방정식의 생성항(production term)은 곧 외부의 비회전 유동이 난류성 유체로 유입되는 정도를 의미하게 된다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.337-342
• /
• 2011

A roller rig has been widely used in the study about dynamic stability and railway safety. However, the cost for constructing the roller rig and the difficulty in adjusting the design parameters for vehicle systems lead to the development of a small scale simulator which is cheaper than the large scale test systems and easy to control the parameters affecting dynamic characteristics of the railway vehicle. For the operation of the small scale test system called a small scale simulator, it is required to investigate the performance and characteristics of the system. This could be achieved by a comparative study between an analysis and an experiment. This paper presented the analytical model which could be used for verifying of the test results and understanding of the physical behavior of the dynamic system comprising the small scale bogie and the simulator.

• 수산해양기술연구
• /
• 제5권1호
• /
• pp.14-20
• /
• 1969

$\circled1Connecting Spread를 일정하게 하고 Towing Line의 길이를 변화시킬 때 각 속도에 따른 망고 및 망폭 Towing line의 길이가 길어질수록 망고는 높아지고 망폭은 좁아진다. $\circled2$ Towing line의 길이를 일정하게 하고 Connecting Spread를 변화시킬 때 망고 및 망폭은 Connecting Spread가 넓어질 수록 망폭은 넓어지나 망고는 거의 변화가 없다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.269-272
• /
• 2006

Numerical analysis of wind turbine scale effect was performed by using computational fluid dynamics. For the numerical analysis of wind turbine. Three dimensional Navier-Stokes solver with various turbulence models was tested and realizable k-e turbulence model was selected for the simulation of wind turbines. To validate the present method, performance of NREL (National Renewable Energy Laboratory) Phase VI wind turbine model was analyzed and compared with experiment and blind test data. Using the present method, numerical simulations for various size of wind tunnel model were carried out and characteristics were observed in detail. The power loss due to the interference between wind turbine and nacelle was also computed for relatively larger nacelle installation in wind tunnel test. The present results showed good correlations with experimental data and reasonable trends of scale effect of wind turbine.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.529-543
• /
• 2022

The lattice-spring-based synthetic rock mass model (LS-SRM) technique has been extensively employed in large open-pit mining and underground projects in the last decade. Since the LS-SRM requires a complex and time-consuming calibration process, a robust approach was developed using the Response Surface Methodology (RSM) to optimize the calibration procedure. For this purpose, numerical models were designed using the Box-Behnken Design technique, and numerical simulations were performed under uniaxial and triaxial stress states. The model input parameters represented the models' micro-mechanical (lattice) properties and the macro-scale properties, including uniaxial compressive strength (UCS), elastic modulus, cohesion, and friction angle constitute the output parameters of the model. The results from RSM models indicate that the lattice UCS and lattice friction angle are the most influential parameters on the macro-scale UCS of the specimen. Moreover, lattice UCS and elastic modulus mainly control macro-scale cohesion. Lattice friction angle (flat joint fiction angle) and lattice elastic modulus affect the macro-scale friction angle. Model validation was performed using physical laboratory experiment results, ranging from weak to hard rock. The results indicated that the RSM model could be employed to calibrate LS-SRM numerical models without a trial-and-error process.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.57-64
• /
• 2021

Maneuvering motions of a ship in calm water are studied through the concept of MMG model. Governing forces are defined by the use of available empirical formulae that require only main ship particulars as input variables. In order to validate the calculation tool, a full-scale sea experiment was carried out in Osaka Bay using a 17-m twin-screw passenger ferry. Test execution and data measurement were performed through the utilization of an autopilot control unit and satellite compass. The result of a straight running test confirms the acceptable accuracy in addressing the surge motion problem. Reasonable agreement between simulation and experiment is also confirmed for 5°/5° and 10°/10° zig-zag tests despite the strong environmental disturbance. The current model can generally represent the subject ship maneuvering motions and is promising for the application to other ship hulls.

• 대한원격탐사학회지
• /
• 제33권4호
• /
• pp.445-454
• /
• 2017

The performance of spatial downscaling models depends on the quality of input coarse scale products. Thus, the impact of intrinsic errors contained in coarse scale satellite products on predictive performance should be properly assessed in parallel with the development of advanced downscaling models. Such an assessment is the main objective of this paper. Based on a synthetic satellite precipitation product at a coarse scale generated from rain gauge data, two synthetic precipitation products with different amounts of error were generated and used as inputs for spatial downscaling. Geographically weighted regression, which typically has very high explanatory power, was selected as the trend component estimation model, and area-to-point kriging was applied for residual correction in the spatial downscaling experiment. When errors in the coarse scale product were greater, the trend component estimates were much more susceptible to errors. But residual correction could reduce the impact of the erroneous trend component estimates, which improved the predictive performance. However, residual correction could not improve predictive performance significantly when substantial errors were contained in the input coarse scale data. Therefore, the development of advanced spatial downscaling models should be focused on correction of intrinsic errors in the coarse scale satellite product if a priori error information could be available, rather than on the application of advanced regression models with high explanatory power.

• Asian Journal of Atmospheric Environment
• /
• 제7권3호
• /
• pp.161-168
• /
• 2013

In this study, an investigation was conducted to assess the washout mechanism of Asian dust particles through both laboratory-scale experiment and model calculation. To artificially simulate Asian dust particle, $CaCO_3$ particles were generated inside an experimental chamber. They were then scavenged by the artificial rain drops. The abundant $CaCO_3$ particles scavenged on a rain drop were successively identified by SEM observation. The concentrations of Ca in residual $CaCO_3$ particles on individual droplet were quantified by PIXE analysis. There was a tendency toward a high accumulation of Ca on a relatively small drop (e.g., <1.0 mm diameter). It is thus suggested that smaller rain drops can effectively scavenge a significant amount of Asian dust particles in ambient atmosphere. The numerical estimation can account for 92.1% and 83.2% of Ca that were measured in small (<1.0 mm diameter) and large (>2.0 mm diameter) size drops, respectively.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.445-448
• /
• 2001

Noise radiated from pile driving operation is one of major sources of community noise pollution and thus its operation method is strictly restricted by regulations. Although the drilling method is now used been commonly used in urban areas because of its activity, the benefit of low noise decreases due to high working cost. In the present work, noise characteristics of pile driving operation are carried out. Based on the study result, a low-noise pile cap for driven piles is developed in order to satisfy both the noise level restriction and the economical efficiency. Effects of pile cap are investigated by a scale model experiment, which is focused on the variation of impact force and sound pressure level. The results show a good possibility of noise reduction by an appropriately designed pile cap.

• 한국음향학회지
• /
• 제13권1호
• /
• pp.93-98
• /
• 1994

본 논문은 모형실험법에 관한 것으로 실내음향과 차음에 있어서 건축음향분야의 모형실험의 의의와 동향 및 음향모형실험에서 실내음향의 물리적인 대응관계인 가장 기본적인 상사칙과 차음의 상사칙에 관하여 이론적으로 고찰하였다.