• 한국복합재료학회:학술대회논문집
• /
• 한국복합재료학회 2005년도 추계학술발표대회 논문집
• /
• pp.190-193
• /
• 2005

The purpose of the present study is to design a 500W-class micro scale composite wind turbine blade. The blade airfoil of FFA-W3-211 was selected to meet Korean weather condition. The skin-spar-f Dam sandwich type structure was adopted for improving buckling and vibration damping characteristics. The design loads were determined at wind speed of 25m/s. and the structural analysis was performed to confirm safety and stability from strength. buckling and natural frequency using the finite element code. NISA II [6]. The prototype was manufactured using the hand-lay up method and it was experimently tested using the sand bag loading method. In order to evaluate the design results. it was compared with experimental results. According to comparison results. the estimated results such as compressible stress. max tip deflection natural frequency and buckling load factor were well agreed with the experimental results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.417-422
• /
• 2004

The vibration of a running vehicle can be classified on lateral, longitudinal and vertical motions. The important factor on the stability and ride quality of a railway vehicle is the lateral motion. The contact between wheel and rail with conicity influences strongly on the lateral motion. In this study, an experiment for the vibration of a running railway vehicle was performed using a small scale railway vehicle model. Also, the effects on the car body, bogie and wheelset were examined for the weight and the stiffness of the first and second suspension. The experimental results showed that the lateral vibration increases as the wheel conicity and stiffness of the second suspension increase. And the lateral vibration of the bogie increases as the mass ratio between car body and bogie increases. Also, the lateral vibration of the wheel becomes high at low speed, while the wheel of 1/20 conicity makes severe vibration at high speed running.

• 한국지반신소재학회논문집
• /
• 제7권1호
• /
• pp.7-11
• /
• 2008

가비온 옹벽은 경험적인 작업을 기초로 발전되어 왔으며, 현장적용이 활발하게 이루어지고 있다. 본 연구에서는 안정성에 중요한 요소인 인발저항력을 높이기 위하여 비교적 짧은 철망보강재로 보강된 가비온 옹벽 토체의 파괴거동을 이해하기 위하여 비교적 작은 규모의 실험을 실시하였다. 토체의 수평변위에 관한 자료를 얻었으며 이러한 자료들을 분석하였다. 또한 같은 조건에서 보강되지 않은 가비온 옹벽의 실험결과와 비교분석을 실시하였다.

• 한국지반공학회논문집
• /
• 제21권8호
• /
• pp.95-105
• /
• 2005

토목섬유로 보강된 성토사면에 대한 사면안정해석은 보강재의 효과를 고려하여 수정된 한계평형해석법을 사용하는 것이 일반적이나, 대부분의 경우 보강재에 의하여 활동면상에 증가된 전단저항력만을 고려함으로써 전체 활동토체의 평형조건의 만족여부는 확실치 않다. 일반적으로 사면안정해석은 활동면상의 법선응력의 분포를 구하는 것으로 귀결 되므로, 본 연구에서는 활동면상에 작용하는 법선응력의 분포를 수평방향의 거리 $\chi$에 대한 2차함수로 가정하여 보강재의 효과를 고려하면서 힘과 모멘트의 평형조건을 모두 만족하는 새로운 사면안정해석법을 제안하였다. 제안된 사면 안정해석법은 잘 알려진 보강 및 무보강 사면에 대한 사면안정해석 사례와 보강토 옹벽 및 보강사면에 대한 모형실험 결과에 대한 해석을 통하여 그 타당성을 검토하였다. 그 결과 본 연구에서 제안한 방법은 보강 및 무보강사면에 대하여 타당한 사면활동에 대한 안전율을 제공해주는 것으로 나타났다.

• 한국강구조학회 논문집
• /
• 제22권4호
• /
• pp.293-303
• /
• 2010

본 연구는 강구조 설계기준(KBC 2009)에서 골조 안정성 평가를 위해 제시한 하중증폭계수를 적용한 직접해석법의 적용 방법에 따른 영향을 해석적 방법을 통해 평가하는데 목적이 있다. 이를 위해 KBC 2009에서 제안하고 있는 가상수평하중 적용 방법, 휨강성 감소 방법, B2 계수 산정 방법 등을 각각 적용한 직접해석을 3층 1스팬 및 5층 3스팬 비가새 강구조 골조에 대해 실시하고, 그 해석 결과를 2차 비탄성 해석 결과와 비교하여 각 적용 방법의 영향을 평가하였다. 직접해석법 적용 방법 이외에 외적 요인의 영향을 고찰하기 위해 골조의 규모, 기둥의 축력비, 축력의 층별분포 등도 변수로 추가하였다. 연구 결과 소요압축강도는 직접해석법 적용 방법에 따른 차이가 크지 않은 것으로 나타났으며, 소요휨강도는 가상수평하중 누계 및 추가 적용, 층강성 개념 B2 계수를 직접해석법에 적용시 적절한 결과를 나타내었다.

• IEIE Transactions on Smart Processing and Computing
• /
• 제2권4호
• /
• pp.240-247
• /
• 2013

The main aim of this study was to suppress the angular velocity against strong winds during storms and analyze the stability and performance of the phase plane method. The utilization of small-scale wind turbine system has become common in agriculture, houses, etc. Therefore, it is considered to be a scheme for preserving the natural energy or avoiding the use of fossil fuels. Moreover, settling small-scaled wind turbines is simpler and more acceptable compared to ordinary huge wind turbines. In addition, after converting the energy there is no requirement for distribution. Therefore, a much lower cost can be expected for small-scaled wind turbines. On the other hand, this system cannot be operated continuously because the small-scaled wind turbine consists of a small blade that has low inertia momentum. Therefore, it may exceed the boundary of angular velocity, which may cause a fault in the system due to the centrifugal force. The aim of this study was to reduce the angular velocity by controlling the stall factor. Stall factor control consists of two control methods. One is a shock absorber that is loaded in the junction of the axis of the blade of the wind turbine gear wheel and the other is pitch angle control. Basically, the stall factor itself exhibits nonlinear behavior. Therefore, this paper confirmed the feasibility of stall factor control in producing desirable performance whilst maintaining stability.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.17-22
• /
• 2000

The separation of tryptophan enantiomers was carried out with medium-pressure liquid chromatography using BSA (bovine serum albumin)-bonded silica as a chiral stationary phase. The influence of various experimental factors such as pH and ionic strength of mobile phase, separation temperature, and the presence of organic additives on the resolution was studied. In order to expand this system to preparative scale, the loadability of sample and the stability of stationary phase for repeated use were also examined. The separation of tryptophan enantiomers was successful with this system. The data indicated that a higher separation factor (a) was obtained at a higher pH and lower temperature and ionic strength in mobile phase. Addition of organic additives (acetonitrile and 2-propanol) in mobile phase contributed to reduce the retention time of L-tryptophan. About $30\%$ of the separation factor was reduced after 80 days of repeated use.

• 지질공학
• /
• 제16권2호
• /
• pp.189-199
• /
• 2006

본 논문은 도로공사시 발생된 붕괴사면을 대상으로 사면안정성을 검토하고, 불안정할 경우 합리적인 사면보강공법을 제안한 현장사례 연구이다. 사면조사결과 대상사면은 5개의 대규모 인장균열을 포함하고 있으며, 사면활동은 인장균열에서 시작하여 표토층과 풍화암층사이까지 발생된 것으로 판단된다. 사면안정해석은 건기시와 우기시에 대하여 각각 수행되었으며, 대상사면은 현재 불안정한 것으로 예측되었다. 사면보강공법은 사면의 파괴규모에 따라 선정하는 것이 바람직하다. 즉, 파괴규모에 따라 소규모파괴, 중규모파괴, 그리고 대규모파괴로 나누고 각각의 파괴규모에 따라 사면보강공법을 결정할 수 있다. 대상사면의 경우 대규모파괴에 해당하므로 사면보강공법은 안전율증가공으로 억지말뚝공을 채택하고, 안전을 유지공으로 식생공(Seed Spray) 및 지표수배제공을 채택할 수 있다. 억지말뚝으로 보강된 사면의 안정해석을 위하여 SLOPILE(Ver 3.0)프로그램을 적용하였다. 사면안정 해석결과 1열의 억지말뚝을 시공할 경우 안정한 것으로 나타났으며, 해석결과로부터 억지말뚝의 사면안정효과를 확인할 수 있다.

• 대한가정학회지
• /
• 제46권7호
• /
• pp.47-58
• /
• 2008

Using the Toddler Temperament Scale(Saslow, 1993), the temperament stability of 239 toddlers from the ages of 18 and 30-months was analyzed longitudinally. TTS was composed of five sub-scales; Activity, Approach-Withdrawal, Adaptability, Intensity, and Mood. Significant correlations were established when stabilities of the temperamental sub-scales from 18- to 24-months, 24- to 30-months and 18- to 30-months were examined. For example, in relation to 'Approach-Withdrawal' factor, which was the most stable across infancy, infants who showed higher scores in 18 months of age also showed higher scores in 24- and 30-months of age. In addition, the stability of temperament in the categorical status of each infant was analyzed. Infants were divided into three groups at each age: 'Easy', 'slow-to-warm up', or 'difficult' according to their relative status within each age group. It was found that 54% of infants stayed in the same temperament group from 18 to 24 months, and so did 78% of infants from 24 to 30 months. In particular, 'easy' group illustrated the highest stability among the groups; 71.2% of infants stayed in the same temperament group between 18 and 24 months of age, while 85.9% of infants did so between 24 and 30 months of age. In conclusion, the results of this study indicate high temperament stability during the studied age bracket, while also confirming the fact that stability, in general, increases with age.

• 대한간호학회지
• /
• 제28권2호
• /
• pp.244-255
• /
• 1998

The purpose of this study was to verify the reliability and validity of the Rosenbaum self-control schedule (SCS) for assessing resourcefulness in Korea and to explore the simplified scale. The study subjects consisted of 787 adults in a community. The data was collected during the period from Oct. to Dec., 1995 and analyzed as Cronbach α, item correlation with total, Pearson correlation and factor analysis with varimax rotation using SAS. Results were as follows : The mean SCS score for this sample was 17.2 and there were statistical differences for gender(men, 13.1 ; women, 20.0) on the SCS scores. The cronbachα of SCS with 36 items was .74 and when simplified with 30 items, it's coefficient alpha was .78. The translated content of the SCS was validated by two nursing faculty members and one professor of psychology. Factor analysis revealed the most parsimonious structure was obtained when six factors were extracted and subsequently rotated via the varimax criterion. There was 40.2% of total communality variance in the SCS with 36 items. The total communality variance was slightly increased to 43.4% with 30 items of the SCS. In order to reduce from 36 items to 30 items, the process excepted 6 items having low item correlation with total and low MSA(means of sampling adequacy) of factor analysis. According to factor analysis, there are six factors such as emotion control, impulse control, self-efficacy, coping with problems, pain control and satisfaction control, The SCS was found to have low, but statistically significant, correlations with social desirability and helplessness. From the above results, it can be concluded that the reliability of the SCS(inherent and simplified) was a acceptable level and its validity was reasonable when comparing it with other validity studies. To determine the usefulness the simplified scale, further study is necessary to simultaneously compare and analyze both scales for stability.