• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.46 no.5
• /
• pp.1-13
• /
• 2009

Filter cache has been introduced as one solution of reducing cache power consumption. More than 50% of the power reduction results from the filter cache, whereas more than 20% of the performance is compromised. To minimize the performance degradation of the filter cache, the predictive filter cache has been proposed. In this paper, we review the previous filter cache predictors and analyze the problems of the solutions. As a result, we found main problems that cause prediction misses in previous filter cache schemes and, to resolve the problems, this paper proposes a new prediction policy. In our scheme, some reference bit entries, called MSBs, are inserted into filter cache and BTB, to adaptively control the filter cache access. In simulation parts, we use a modified SimpleScalar simulator with MiBench benchmark programs to verify the proposed filter cache. The simulation result shows in average 5% performance improvement, compared to previous ones.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.209-212
• /
• 2003

In this paper, we have analyzed a multiwavelet filter bank architecture which have several bases. The filter bank composed of multiwavelets bases is matrix-valued. Multiwavelets offer simultaneous orthogonality, symmetry, and short support, which is not possible for the scalar wavelet system, hence multiwavelet system can obtain excellent performance in signal analysis and compress. Also the multiwavelet differs from the scalar wavelet system in requiring two or more input streams to the multiwavelet filter bank. In this paper, we describe methods for obtaining such a input stream and how apply the actual data.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.565-573
• /
• 2017

This paper presents a multistage in-flight alignment (MIFA) method for a strapdown inertial navigation system (SDINS) suitable for moving vehicles with no initial attitude references. A SDINS mounted on a moving vehicle frequently loses attitude information for many reasons, and it makes solving navigation equations impossible because the true motion is coupled with an undefined vehicle attitude. To determine the attitude in such a situation, MIFA consists of three stages: a coarse horizontal attitude, coarse heading, and fine attitude with adaptive Kalman navigation filter (AKNF) in order. In the coarse horizontal alignment, the pitch and roll are coarsely estimated from the second order damping loop with an input of acceleration differences between the SDINS and GPS. To enhance estimation accuracy, the acceleration is smoothed by a scalar filter to reflect the true dynamics of a vehicle, and the effects of the scalar filter gains are analyzed. Then the coarse heading is determined from the GPS tracking angle and yaw increment of the SDINS. The attitude from these two stages is fed back to the initial values of the AKNF. To reduce the estimated bias errors of inertial sensors, special emphasis is given to the timing synchronization effects for the measurement of AKNF. With various real flight tests using an UH60 helicopter, it is proved that MIFA provides a dramatic position error improvement compared to the conventional gyro compass alignment.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.6
• /
• pp.1005-1012
• /
• 1987

An adaptive scalar DCT-Wiener filtering method that can be applied to the problem of restoring an image degraded by white Gaussian noise is presented. In this method, the power spectrum needed to Winer filering is adaptively estimated in block-wise according to the lical properties in transform domain. In addition, overlapping method for reducing the block artifact is considered. Experimental results show that the adaptive Wiener filter by the proposed method yields performance improvement and better image quality over the nonadaptive one and the spatial Lee filter.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.24 no.3
• /
• pp.493-503
• /
• 1987

Performances of some image restoration filters are compared and evaluated on SNR gain and subjective test. Test images used here are the GIRL and PLANT images corrupted by Gaussian, uniform, BSC, and impulse noise, respectively. Experimental results show that the scalar DCT-Wiener filter among them is comparatively superior to others in Gaussian and uniform noise. On the other hand, the median filter is much better than others in BSC and impulse noise.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.5C
• /
• pp.521-526
• /
• 2009

In this paper, a complex-valued recursive least squares escalator filter algorithm with reduced computational complexity for complex-valued signal processing applications is presented. The local tap weight of RLS-ESC algorithm is updated by incrementing its old value by an amount equal to the local estimation error times the local gain scalar, and for the gain scalar, the local input autocorrelation is calculated at the previous time. By deriving a new gain scalar that can be calculated by using the current local input autocorrelation, reduced computational complexity is accomplished. Compared with the computational complexity of the complex-valued version of RLS-ESC algorithm, the computational complexity of the proposed method can be reduced by 50% without performance degradation. The reduced computational complexity of the proposed algorithm is even less than that of the LMS-ESC. Simulation results for complex channel equalization in 64QAM modulation schemes demonstrate that the proposed algorithm has superior convergence and constellation performance.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2043-2051
• /
• 2006

This paper considered identification of vibration characteristics of flexible structure with vector channel periodic lattice filter. We present an algorithm for AR coefficients for the vector-channel lattice filters, and characteristic equation and transfer function are derived from these coefficients. Vibration lattice filter is then constructed from the vector channel lattice filter, and performance of this vibration filter is tested with a test signal which is a combination of many sine waves to compare the performance of scalar and vector channel lattice. Also it is applied to the cantilever data to identify properties of the system, such as natural frequencies and damping ratios, to show its performance.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.12
• /
• pp.9-16
• /
• 2009

Energy consumption as well as performance should be considered when designing up-to-date multicore processors. In this paper, we propose new design technique to reduce the energy consumption in the instruction cache for multicore processors by using modified filter cache. The filter cache has been recognized as one of the most energy-efficient design techniques for singlecore processors. The energy consumed in the instruction cache accounts for a significant portion of total processor energy consumption. Therefore, energy-aware instruction cache design techniques are essential to reduce the energy consumption in a multicore processor. The proposed technique reduces the energy consumption in the instruction cache for multicore processors by reducing the number of accesses to the level-1 instruction cache. We evaluate the proposed design using a simulation infrastructure based on SimpleScalar and CACTI. Simulation results show that the proposed architecture reduces the energy consumption in the instruction cache for multicore processors by up to 3.4% compared to the conventional filter cache architecture. Moreover, the proposed architecture shows better performance over the conventional filter cache architecture.

• Transactions on Control, Automation and Systems Engineering
• /
• v.1 no.2
• /
• pp.134-140
• /
• 1999

The robust generalized H2 filtering problem for a class of discrete time uncertain linear systems satisfying the sum quadratic constraints(SQCs) is considered. The objective of this paper is to develop robust stability condition using SQCs and design a robust generalized Ha filter to take place of the existing robust Kalman filter. The robust generalized H2 filter is designed based on newly derived robust stability condition. The robust generalized Ha filter bounds the energy to peak gain from the energy bounded exogenous disturbances to the estimation errors under the given positive scalar ${\gamma}$. Unlike the robust Lalman filter, it does not require any spectral assumptions about the exogenous disturbances . Therefore the robust generalized H2 filter can be considered as a deterministic formulation of the robust Kalman filter. Moreover, the variance of the estimation error obtained by the proposed filter is lower than that by the existing robust Kalman filter. The robustness of the robust generalized H2 filter against the uncertainty and the exogenous signal is illustrated by a simple numerical example.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.4
• /
• pp.286-291
• /
• 2003

In this Paper, we designed an LSP(Line Spectral Pairs) parameter quantizer with cascaded structure of vector quantizer and scalar quantizer for the wideband speech coder. We have chosen the 16th-order of the LP coefficients. These coefficients are then transformed into the LSP parameters which have the excellent properties for quantization and easy stability checking condition of synthesis filter. In the first stage of quantization, input LSP parameters are split-vector-quantized using two 8-th order codebooks. In the second stage, the components of residual vector are individually quantized by the scalar quantizer utilizing the ordering property of LSP parameters. The designed adaptive VQ-SQ quantizer using 35 bits/frame shows the wideband transparency that the average spectral distortion should be less than 1.6 ㏈ and less than 4% of the frames should have SD above 3 ㏈. The simulation results show that the designed quantizer provides a 2-3 bits/frame saving over the typical vector-scalar quantizer.