• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1966-1971
• /
• 2004

As the remote sensing satellite technology grows, the acquisition of accurate attitude and position information of the satellite has become more and more important. Due to the data processing limitation of the on-board orbit propagator and attitude determination algorithm, it is required to develop much more accurate orbit and attitude determination, which are so called POD (precision orbit determination) and PAD (precision attitude determination) techniques. The sensor and attitude dynamics simulation takes a great part in developing a PAD algorithm for two reasons: 1. when a PAD algorithm is developed before the launch, realistic sensor data are not available, and 2. reference attitude data are necessary for the performance verification of a PAD algorithm. A realistic attitude dynamics and sensor (IRU and star tracker) outputs simulation considering their physical characteristics are presented in this paper, which is planned to be used for a PAD algorithm development, test and performance verification.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.990-1013
• /
• 2015

Deploying sensors into a target region is a key issue to be solved in building a wireless sensor network. Various deployment algorithms have been proposed by the researchers, and most of them are evaluated under the ideal conditions. Therefore, they cannot reflect the real environment encountered during the deployment. Moreover, it is almost impossible to evaluate an algorithm through practical deployment. Because the deployment of sensor networks require a lot of nodes, and some deployment areas are dangerous for human. This paper proposes a deployment approach to solve the problems mentioned above. Our approach relies on the satellite images and the Virtual Force Algorithm (VFA). It first extracts the topography and elevation information of the deployment area from the high resolution satellite images, and then deploys nodes on them with an improved VFA. The simulation results show that the coverage rate of our method is approximately 15% higher than that of the classical VFA in complex environment.

• Ocean Science Journal
• /
• v.40 no.2
• /
• pp.67-78
• /
• 2005

Complex physical, chemical and biological interactions off the Korean coast created several striking patterns in the phytoplankton blooms, which became conspicuous during the measurements of ocean color from space. This study concentrated on analyzing the spatial and temporal aspects of phytoplankton chlorophyll variability in these areas using an integrated dataset from a Sea-viewing Wide Field-of-view Sensor (SeaWiFS), Advanced Very High Resolution (AVHRR) sensor, and Conductivity Temperature Depth (CTD) sensor. The results showed that chlorophyll concentrations were elevated in coastal and open ocean regions, with strong summer and fall blooms, which appeared to spread out in most of the enclosed bays and neighboring waters due to certain oceanographic processes. The chlorophyll concentration was observed to range between 3 and $54\;mg\;m^{-3}$ inside Jin-hae Bay and adjacent coastal bays and 0.5 and $8\;mg\;m^{-3}$ in the southeast sea offshore waters, this gradual decrease towards oceanic waters suggested physical transports of phytoplankton blooms from the shallow shelves to slope waters through the influence of the Tsushima Warm Current (TWC) along the Tsushima Strait. Horizontal distribution of potential temperature $(\theta)$ and salinity (S) of water off the southeastern coast exhibited cold and low saline surface water $(\theta and warm and high saline subsurface water $({\theta}>12^{\circ}C; S>34.4)$ at 75dBar, corroborating TWC intrusion along the Tsushima Strait. An eastward branch of this current was called the East Korean Warm Current (EKWC), tracked with the help of CTD data and satellite-derived sea surface temperature, which often influenced the dynamics of mesoscale anticyclonic eddy fields off the Korean east coast during the summer season. The process of such mesoscale anticyclonic eddy features might have produced interior upwelling that could have shoaled and steepened the nutricline, enhancing phytoplankton population by advection or diffusion of nutrients in the vicinity of Ulleungdo in the East Sea.

• Aerospace Engineering and Technology
• /
• v.8 no.2
• /
• pp.75-82
• /
• 2009

In order to help general users to analyze the KOMPSAT-2 data, an application of sensor modeling to commercial software was explained in this document. The sensor modeling is a basic step to extract the quantity and quality information from KOMPSAT-2 data. First, we introduced the contents and type of ancillary data offered with KOMPSAT-2 PAN image data, and explained how to use it with commercial software. And then, we applied the polynomial-base and refine RFM sensor modeling with ground control points. In the polynomial-base sensor modeling, the accuracy which is average RMSE of check points is highest when the satellite position was calculated by type of 1st order function and the satellite attitude was calculated by type of 1st order function for (Y axis), (Z axis) or constant for (X axis), (Y axis), (Z axis) in perspective center position and satellite attitude parameters. As a result of refine RFM sensor modeling, the accuracy is less than 1 pixel when we applied affine model..

• Bulletin of the Korean Space Science Society
• /
• 2004.10b
• /
• pp.223-226
• /
• 2004

This paper presents a feasibility study of an advanced IO board design for the next generation of low-earth orbit satellites. Advanced IO board design includes sensor interface, NO, D/A, Digital Module, Serial Module etc, and allows to process increasing data rates between IO board and CPU board. The higher data rate involved in modem IO board additionally introduce issues such as noise, fault tolerance, command and data handling, limited pin count and power consumption problems. The experience in KOMPSAT-l and 2 program with this kind of problems resulted in using SMCS chip set, a high speed serial link technology based on IEEE-1355 (Space Wire Protocol) (ESA-ESTEC 2003, Parkes 1999), as a standard for next generation of satellite IO board design.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1477-1482
• /
• 2023

This study examines marine heat wave (MHW) in the Northeast Asia region from 2012 to 2021, utilizing geostationary satellite Communication, Ocean, and Meteorological Satellite (COMS)/Meteorological Imager sensor (MI) and GEO-KOMPSAT-2A (GK-2A)/Advanced Meteorological Imager sensor (AMI) Sea Surface Temperature (SST) data. Our analysis has identified an increasing trend in the frequency and intensity of MHW events, especially post-2018, with the year 2020 marked by significantly prolonged and intense events. The statistical validation using Optimal Interpolation (OI) SST data and satellite SST data through T-test assessment confirmed a significant rise in sea surface temperatures, suggesting that these changes are a direct consequence of climate change, rather than random variations. The findings revealed in this study serve the necessity for ongoing monitoring and more granular analysis to inform long-term responses to climate change. As the region is characterized by complex topography and diverse climatic conditions, the insights provided by this research are critical for understanding the localized impacts of global climate dynamics.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.7
• /
• pp.703-710
• /
• 2007

This paper presents an attitude determination scheme for the Science and Technology Satellite-2(STSAT-2) using Fine Digital Sun Sensor(FDSS). The FDSS has been developed for STSAT-2, and exhibits the accuracy of 0.032degree in $1{\sigma}$. To be specific, the attitude information from the sensor is exploited to compensate for Fiber Optic Gyro(FOG) mounted on STSAT-2, and Kalman filter model is derived and implemented. To show the effectiveness of the present compensation scheme, computer simulations have been carried out resulting in the attitude errors within a bound.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.179-184
• /
• 2004

High-resolution satellite imagery are used in various application field such as generation of DEM, orthophto, and three dimensional city model. To define the relation between image and object space, sensor modelling and generation of the epipolar image is essential processes. As the header information or physical sensor model becomes unavailable for the end users due to the national security or commercial purpose, generation of epipolar images without these information becomes one of important processes. In this study, epipolar geometry is generated and analysed by applying two generalized sensor models; parallel and parallel-perspective model Epipolar equation of the parallel model has linear property which is relatively simple; Epipolar geometry of the parallel-perspective model is non-linear. This linear property enable us to generate epipolar image efficiently.

• Aerospace Engineering and Technology
• /
• v.2 no.1
• /
• pp.63-72
• /
• 2003

On the basis of sensor types, satellites can be classified by two types, which are optical observation satellite and radar observation satellite. A satellite type is selected according to the specific mission. Optical observation satellite is more appropriate for getting high geometric resolution images and radar observation satellite is more appropriate for getting images independent of weather condition the more a demand of satellite increases, the more an importance of information increases. Therefore, development trend and state of earth observation satellite are surveyed and described in this paper. In the future, domestic development of satellites will be planned considering trend of satellite technologies.

• Proceedings of KOSOMES biannual meeting
• /
• 2008.05a
• /
• pp.191-195
• /
• 2008

In Ansan (the headquarter of KORDI ; Korea Ocean Research & Development Institute), KOSC(Korea Ocean Satellite Center) is being prepared for acquisition, processing and distribution of sensor data via L-band from GOCI(Geostationary Ocean Color Imager) instrument which is loaded on COMS(Communication, Ocean and Meteorological Satellite); it will be launched in 2009. The basis equipment of KOSC(Electric power, Network, Security) has been constructed in 2007. KOSC is being constructed data processing and management system, GOCI L-band reception system, etc. The final object of KOSC is that maximize the application of GOCI.