• 한국위성정보통신학회논문지
• /
• 제12권2호
• /
• pp.65-70
• /
• 2017

The structure of MMSE receiver front-ended by CMA(Constant Modulus Array) array working in CDMA forward link which is applicable to LEO spread spectrum satellite communication system is proposed. By using the despreaded pilot signal of forward link as a reference signal, the CMA array can capture multi-path signals securely even in severely faded LEO satellite channel. The remaining MAI (Multiple Access Interference) is cancelled by the cascaded MMSE receiver. Besides theoretical development, through relevant computer simulation, it is proved that the proposed system shows much better BER performance than any other possible candidate systems. As a spatio-temporal receiver mounted on a mobile vehicle, the proposed system also reduces implemental cost and complexity by adopting the simplest algorithm for its spatial and temporal domain processing.

• Journal of Positioning, Navigation, and Timing
• /
• 제11권3호
• /
• pp.173-179
• /
• 2022

The satellite navigation deception technology disturbs the navigation solution of the receiver by generating a deceptive signal simulating the actual satellite for the satellite navigation receiver mounted on the unmanned aerial vehicle, which is the target of deception. A single spoofing technique that creates a single deceptive position and velocity can be divided into a synchronized spoofing signal that matches the code delay, Doppler frequency, and navigation message with the real satellite and an unsynchronized spoofing signal that does not match. In order to generate a signal synchronized with a satellite signal, a very sophisticated and high precision signal generation technology is required. In addition, the current position and speed of the UAV equipped with the receiver must be accurately detected in real time. Considering the detection accuracy of the current radar technology that detects small UAVs, it is difficult to detect UAVs with an accuracy of less than one chip. In this paper, we assume the asynchrony of a single spoofing signal and propose a region defense technique using multiple spoofing signals.

• 한국군사과학기술학회지
• /
• 제13권1호
• /
• pp.133-139
• /
• 2010

GNSS receiver which uses the weak satellite signal is very vulnerable to the intentional jamming or non-intentional electromagnetic interference. It is a very simple method among the use method of GNSS receiver to vary tracking loop bandwidth of satellite signal appropriately as the jamming signal level. In this paper, this anti-jamming performance is experimented and analyzed in the laboratory and the anechoic chamber by the GNSS simulator to generate the satellite signal and the jamming signal generator to generate the jamming signal.

• 한국위성정보통신학회논문지
• /
• 제2권1호
• /
• pp.56-62
• /
• 2007

UWB시스템은 수 GHz의 넓은 대역폭을 이용해 적은 전력으로도 높은 전송률을 낼 수 있도록 하는 차세대 이동 통신시스템이다. 여기에 Cognitive Radio 기술을 이용하면 위성통신시스템에 간섭을 주지 않고 서로 공존하여 주파수를 효과적으로 사용할 수 있는데, 위성통신수신기의 수동적인 특성 대문에 적용이 힘들다. 따라서 이 논문에서는 수동적인 위성통신기의 Local Oscillator에 증폭기와 안테나를 연결하여 LO 신호를 방사시키고 UWB터미널은 Energy Detection을 이용하여 위성통신수신기에서 방사된 LO신호를 감지하는 구조를 제안한다. 또한 제안한 구조에 대한 시뮬레이션을 통해 UWB시스템과 위성통신시스템의 공존 가능성을 확인한다.

• 한국전자파학회논문지
• /
• 제27권10호
• /
• pp.909-916
• /
• 2016

비콘 수신기는 위성에서 송출된 비콘 신호를 검출하여 그 신호세기를 측정하는 장치이다. 위성에서 송출된 비콘 신호는 지구국의 안테나를 목표 위성 방향으로 이동시키는 포지셔너의 조정 및 송신출력 제어 목적을 위한 것으로 무변조 저전력 연속파(CW)로 구성되어 있다. 일반적으로 비콘 신호 검출은 협대역 아날로그 필터를 사용한 RSSI(Received Signal Strength Intensity) 방식이 대표적으로 사용되고 있으나, 온도변화 및 장시간 동작에 따른 위성 송출 비콘 주파수 변동이 발생됨에 따라 비콘 수신기에서 주파수를 추적하는 스캔 기능 구현을 필요로 한다. 본 설계에서는 보다 빠른 비콘 신호 검출을 위하여 협대역 디지털필터를 다중 배열하여 비콘 주파수를 추적하고, SNR(Signal to Noise Ratio) 방식에 의한 비콘 신호 검출방식 수신기로 설계한다. 이를 위하여 위성과 지구국 사이의 강우감쇠를 고려한 무선채널 링크 버젯을 사용하여 비콘 신호 수신 $C/N_o$ 및 비콘 신호 검출을 위한 필요 C/N을 고려한 뒤 디지털필터의 대역폭 및 배열 개수를 도출한다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.561-563
• /
• 2005

From the IF (Intermediated Frequency) loop-back test, BER (Bit Error Rate) degradation of processed data, HRIT (High Rate Information Transmission), is estimated by proposed measurement configuration. The specific parameters, likely data rate, FEC (Forward Error Correction), and modulation method, are based on the outcomes of SRR (System Requirements Review) which was held on 13-14 June 2005, in Toulouse. The proposed measurement procedure is that combined 70MHz modulated signal and noise is connected to the spectrum analyzer and receiver. The former measures the C/No (Carrier to Noise density ratio) and the latter estimates BER of FEC decoded data. Implementation loss can be obtained by subtracting measured BER from calculated BER which is also subtracted data rate from measured C/No. This test procedure is very simple and can be applied to assess the implementation loss of dedicated receiver for HRIT in the future.

• 전자공학회논문지A
• /
• 제30A권4호
• /
• pp.28-39
• /
• 1993

In the international BISDN used satellite, the laser that has large BW has to be used as a carrier for transmitting a lot of visual, vocal, and data information. Interoptical satellite communication has now developed in theoretical and practical aspects. But the optical communication, between satellite and earth station, is hindered by atmospheric absorption, scattering, and turbulence. In this paper, it was supposed that 1Gbps information was transmitted by binary FSK and 50mW AlGaAs semiconductor laser was used as a optical source in the satellite communication link between geosynchronous orbit satellite and earth station. We analyzed the BER and the entire diameter of the noncoherently combined optical heterodyne receiver as el evation angle, and determined the number of the optical heterodyne rece ivers, which is necessary for the BER of the receiver to be less than 10$^{-9}$ by computer simulation under the clear weather condition. It is shown that the BER and the number of the optical heterodyne receivers decrease as the elevation angle increases. In the region used the same number of the optical heterodyne receivers, it is shown that the entire diameter of the receiver increases but the BER decreases as the elevation angle increases.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.672-675
• /
• 1994

This paper presents a new algorithm to determine the receiver position in satellite navigation for GPS(Global Positioning System). The algorithm which based on vector analysis is able to obtain simultaneously the receiver position and the direction vector which is from the receiver position to a satellite. In its first calculation stage it, does riot require the complex initial value which is used in the previous works and affects the accuracy of the observed receiver position. Furthermore, the algorithm tells us whether a selected configuration among the visible satellites is good or poor for the accuracy. Comparing the algorithm with the previous method, the effectiveness of the algorithm is verified through the experimental simulations.

• Journal of Astronomy and Space Sciences
• /
• 제27권4호
• /
• pp.345-352
• /
• 2010

Korea multi-purpose satellite-5 (KOMPSAT-5) is a low earth orbit (LEO) satellite scheduled to be launched in 2010. To satisfy the precision orbit determination (POD) requirement for a high resolution synthetic aperture radar image of KOMPSAT-5, KOMPSAT-5 has atmosphere occultation POD (AOPOD) system which consists of a space-borne dual frequency global positioning system (GPS) receiver and a laser retro reflector array. A space-borne dual frequency GPS receiver on a LEO satellite provides position data for the POD and radio occultation data for scientific applications. This paper describes an overview of AOPOD system and operation concepts of the radio occultation mission in KOMPSAT-5. We showed AOPOD system satisfies the requirements of KOMPSAT-5 in performance and stability.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.208-211
• /
• 2008

Band-limited filtering will be applied to remove interference resulted from two neighbored channels in the transmission of KOMPSAT-5 X-Band image data. In that case, receiver in ground station should prepare righteous matched filter to avoid huge BER degradation depending on the matched filter of COTS receiver. As an effort to simulate the bandlimited filtering, test filter was designed and manufactured on the basis of main specification for output filter of KOMPSAT-5 satellite. Consequently, 1.8dB of BER degradation was measured at the output of test band-pass filter, but the degradation was downsized up to 0.4dB thanks to the adaptive matched filter of COTS receiver.