• 한국표면공학회지
• /
• 제44권4호
• /
• pp.165-171
• /
• 2011

In this work, handling of sapphire substrate for LED by using an electrostatic chuck was studied. The electrostatic chuck consisted of alumina dielectric, which was doped with 1.2 wt% $TiO_2$. As the volume resistivity of alumina dielectric was decreased, the electrostatic force was increased by Johnsen-Rahbek effect. The narrower width and gap size of electrode led to the stronger electrostatic force. When alumina dielectric with $3.20{\times}10^{11}{\Omega}{\cdot}cm$ resistivity and 3 mm width/1.5 mm gap sized electrode was used, the strongest electrostatic force in this work was obtained, which value reached to ~14.46 gf/$cm^2$ at 2.5 kV for 4-inch sapphire substrate. This results show that alumina electrostatic chuck with low resistivity and fine electrode pattern is suitable for handling of sapphire substrate for LED.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 추계학술대회 논문집
• /
• pp.148-151
• /
• 1995

Excimer laser has been used to fabricate superconducting YBa$_2$Cu$_3$O$\sub$7-x/(YBCO) thin films on various substrates. An XeCl excimer laser with an wavelength of 308 nm was used to deposit both buffer layer and superconducting thin film on sapphire substrate. The characterizations of the interface between thin film and substrate were performed. The interfacial properties of thin films on buffered sapphire and on bare sapphire were compared. With a 20 nm PrBa$_2$Cu$_3$O$\sub$7-x/(PBCO) buffer layer, no diffusion layer was observed between film and substrate while the diffusion layer with about 30 nm thickness was observed between film and sapphire without buffer layer.

• Progress in Superconductivity
• /
• 제3권1호
• /
• pp.60-64
• /
• 2001

We have studied properties of step-edge Junction prepared with crystal orientation of sapphire substrate. The Step on sapphire substrates fabricated by conventional photolithography method and Ar ion milling method. $CeO_2$ buffer layer and in-situ YBCO thin film were deposited on the stepped sapphire substrates by a pulsed laser deposition method with the predetermined optimized condition. The step angle was centre fled low angle of about $25^{\circ}$. The YBCO film thickness was varied to obtain various thickness ratios of the film to the step height in a range from 0.7 to 1.2. I-V curves of junction were showed RSJ-behavior, double junction structure, and hysteresis due to the crystal orientation of substrate.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.901-904
• /
• 2001

For the c-axis oriented epitaxial YBa$_2$Cu$_3$O$_{7-{\delta}}$ thin film on r-cut sapphire substrate it is necessary to deposit buffer layers. The CeO$_2$buffer layer was deposited on sapphire substrate using RF magnetron sputtering system. We investigated XRD pattern of CeO$_2$thin films at various sputtering conditions such as sputtering gas ratio, sputtering power, target to substrate distance, sputtering pressure and substrate temperature. The optimum condition was 15 mTorr with deposition pressure, 1:1.2 with $O_2$and Ar ratio and 9cm with target to substrate distance. The CeO$_2$(200) peak was notable for a deposition temperature above 75$0^{\circ}C$. The YBa$_2$Cu$_3$O$_{7-{\delta}}$ was deposited on CeO$_2$buffered r-cut sapphire substrate using pulsed laser ablation. The YBa$_2$Cu$_3$O$_{7-{\delta}}$CeO$_2$(200)/A1$_2$O$_3$thin film was exhibited a critical temperature of 89K.xhibited a critical temperature of 89K.

• 한국광학회지
• /
• 제16권3호
• /
• pp.275-286
• /
• 2005

InGaN LED에서 칩 구조 및 칩마운트 구조에 따른 광추출효율의 변화를 Monte Calo 기법을 이용하여 해석하였다. Simulation을 통해 얻은 중요한 결론의 하나는, InGaAlP 또는 InGaN/SiC LED의 경우에서는 달리, InGaN/sapphire LED의 경우 칩의 측 벽면 기울임 기법의 광추출효율 개선효과가 상대적으로 미미하다는 점이다. InGaN/SiC LED의 경우와는 달리, 기판으로 사용되는 sapphire의 굴절률이 상대적으로 작아서 생성된 광자들이 기판으로 넘어가는데 전반사장벽을 만나게 되어, 많은 광자들이 기판으로 넘어가지 못하고 두께가 매우 얇은 반도체 결정층에 갇히는 현상 때문이다. 동일한 현상은 epi-down 구조의 칩 마운트에서 광추출효율이 크게 개선되지 못하는 원인으로도 작용하게 된다. 광추출효율 관점에서의 epi-down 구조의 InGaN/sapphire LED가 갖고 있는 잠재력을 살리기 위한 방법의 하나는 기판-에피택시 계면을 texturing 하는 것이라고 할 수 있는데, 이 경우 생성된 광자들이 다량기판으로 넘어갈 수 있게 되어 광추출효율이 현저하게 개선된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.51-51
• /
• 2010

Group III-nitride semiconductors have been widely studied as the materials for growth of light emitting devices. Currently, GaN devices are predominantly grown in the (0001) c-plane orientation. However, in case of using polar substrate, an important physical problem of nitride semiconductors with the wurtzite crystal structure is their spontaneous electrical polarization. An alternative method of reducing polarization effects is to grow on non-polar planes or semi-polar planes. However, non-polar and semipolar GaN grown onto r-plane and m-plane sapphire, respectively, basically have numerous defects density compared with c-plane GaN. The purpose of our work is to reduce these defects in non-polar and semi-polar GaN and to fabricate high efficiency LED on non/semi-polar substrate. Non-polar and semi-polar GaN layers were grown onto patterned sapphire substrates (PSS) and nano-porous GaN/sapphire substrates, respectively. Using PSS with the hemispherical patterns, we could achieve high luminous intensity. In case of semi-polar GaN, photo-enhanced electrochemical etching (PEC) was applied to make porous GaN substrates, and semi-polar GaN was grown onto nano-porous substrates. Our results showed the improvement of device characteristics as well as micro-structural and optical properties of non-polar and semi-polar GaN. Patterning and nano-porous etching technologies will be promising for the fabrication of high efficiency non-polar and semi-polar InGaN LED on sapphire substrate.

• 한국재료학회지
• /
• 제21권5호
• /
• pp.268-272
• /
• 2011

Due to their novel properties, GaN based semiconductors and their nanostructures are promising components in a wide range of nanoscale device applications. In this work, the gallium nitride is deposited on c-axis oriented sapphire and porous SWCNT substrates by molecular beam epitaxy using a novel single source precursor of $Me_2Ga(N_3)NH_2C(CH_3)_3$ with ammonia as an additional source of nitrogen. The advantage of using a single molecular precursor is possible deposition at low substrate temperature with good crystal quality. The deposition is carried out in a substrate temperature range of 600-750$^{\circ}C$. The microstructural, structural, and optical properties of the samples were analyzed by scanning electron microscopy, X-ray diffraction, Raman spectroscopy, and photoluminescence. The results show that substrate oriented columnar-like morphology is obtained on the sapphire substrate while sword-like GaN nanorods are obtained on porous SWCNT substrates with rough facets. The crystallinity and surface morphology of the deposited GaN were influenced significantly by deposition temperature and the nature of the substrate used. The growth mechanism of GaN on sapphire as well as porous SWCNT substrates is discussed briefly.

• 한국세라믹학회지
• /
• 제40권6호
• /
• pp.539-546
• /
• 2003

GaN/사파이어 박막구조는 높은 SAW속도로 인해 고주파 소자로 이용될 가능성이 있다. 일반적으로, GaN 박막은 사파이어의 c, a, 그리고 r-면에 성장한다. 본 연구에서는 사파이어의 기판과 GaN 박막사이의 결정학적 관계에 따라 GaN/사파이어 구조의 파동 방정식을 계산하였다. 각각의 면에서, GaN의 kH와 사파이어의 기판방향에 따라 전단속도가 변화하였다. 그 결과 r-면의 경우 전기기계결합계수가 우수했다. 즉, 재료의 탄성상수와 전기기계결합계수는 기판의 cut 방향과 방향성에 좌우된다. 또한, GaN/r-면 사파이어는 전기기계결합계수가 우수하므로 고주파수 대역 SAW 소자 응용에 보다 더 좋을 것이다.

• 한국결정성장학회지
• /
• 제4권2호
• /
• pp.131-133
• /
• 1994

$[0.5 \mu\textrm{m} (100) Si/(1102) sapphire]$ 기판상에 액상 에피탁시 방법으로 태양전지용 실리콘 박막형성을 시도하여, 평균 14 $\mu\textrm{m}$ 두께의 실리콘 박막을 아주 낮은 온도범위 $(380^{\circ}C~460^{\circ}C)$에서 성장시켰다.

• Tribology and Lubricants
• /
• 제32권2호
• /
• pp.56-60
• /
• 2016

Sapphire has a high hardness and strength and chemical stability as a superior material. It is used mainly as a material for a semiconductor as well as LED. Recently, the cover glass industry used by a sapphire is getting a lot of attention. The sapphire substrate is manufactured through ingot sawing, lapping, diamond mechanical polishing (DMP) and chemical mechanical polishing (CMP) process. DMP is an important process to ensure the surface quality of several nm for CMP process as well as to determine the final form accuracy of the substrate. In DMP process, the material removal is achieved by using the mechanical energy of the relative motion to each other in the state that the diamond slurry is disposed between the sapphire substrate and the polishing platen. The polishing platen is one of the most important factors that determine the material removal characteristics in DMP. Especially, it is known that the geometric characteristics of the polishing platen affects the material removal amount and its distribution. This paper investigated the material removal characteristics and the effects of the polishing platen groove in sapphire DMP. The experiments were preliminarily carried out to evaluate the sapphire material removal characteristics according to process parameters such as pressure, relative velocity and so on. In the experiment, the monitoring apparatus was applied to analyze process phenomena in accordance with the processing conditions. From the experimental results, the correlation was analyzed among process parameters, polishing phenomena and the material removal characteristics. The material removal equation based on phenomenological factors could be derived. And the experiment was followed to investigate the effects of platen groove on material removal characteristics.