• 복식
• /
• 제48권
• /
• pp.151-168
• /
• 1999

A Study on a Woman's Shrouds in Middle of the 16 Century based on the excavation of the Mrs. Moon's grave in Andong is reported in this paper. As a result of the study the followings are obtained: 1. From the architecture and costume in the Mrs. Moon's grave we can conclude that Confucian funeral rites were already established in Andong region of the 16th century. 2. The articles used for funeral rites can be classified as Bujangpum(副葬品) Chikwanjeku(治棺諸具) Bokongpoom(補空品), and Yumsupku(斂솝具) and costumes for the death wrapping can be especially classified as Yumsupeui(斂섭衣) 3. Total 63 remains were excavated from the Mrs. Moon's grave. Among them 3 Chikwanjeku 19 Daeryumku(大斂具) 12 Soryumku(小斂具) and 29 Supku(섭具) Yumsup procedure was performed with great care Shrouds were the casual cloths and only Sangbok were made for the ritual Several Sooeui were found. 4. Pricedyak characteristics of Yumsup include unusual direction of wrap the meaning of Boolryu and unusual Chingsoo of used clothes. 5. There were 41 costumes in : Coats were Sangbok and Jangot upper cloths were long jacket and short jacket Danjukori Jeoksam and Hansam Each of the trousers and the skirts were two different kinds by the form The pair of Hangjeon socks shoes and a cap found in this grave were also studied.

• 헤리티지:역사와 과학
• /
• 제56권1호
• /
• pp.142-160
• /
• 2023

배표의(拜表儀)는 황제에게 보내는 외교문서인 표문(表文)에 치르던 의례로, 세종 대에 행하여진 배표의에 참여하는 사람들의 직책과 그에 따른 복식을 살펴보았다. 의례 주체자인 왕은 최고 법복인 면복을 착용하였고, 면복은 구류평천관에 구장복으로 구성된다. 왕세자와 종친, 문무백관은 조복인 양관과 적라의를 착용하였다. 왕세자의 조복은 세종 10년에 오량관에서 육량관으로 바뀌었고, 문종 즉위년에 왕세자의 면복을 받아서 단종 이후에는 팔류평천관과 칠장곤복을 착용하였다. 사행원인 사자와 종사관은 상복을 착용하였다. 사자가 착용한 상복은 사모에 흑단령, 서대, 협금화이고, 종사관이 착용한 상복은 사모에 흑단령, 흑각대, 흑피화이다. 왕의 측근에서 시종하는 별감은 공복과 상복을 착용하였다. 공복은 자건에 청단령과 흑피화, 상복은 주황초립과 직령에 조아, 흑피화로 구성되었다. 의장군은 황의장과 왕의 의장이 진열되었고, 산과 개, 수정장, 금월부를 들고 있는 자는 자건에 청의를, 전도황기는 피모자에 청의를 착용하였다. 선과 금은횡과·금은입과·금은장도는 피모자에 홍의를 착용하였다. 시위군은 갑옷과 투구에 검 또는 궁시를 갖추어 착용하였다. 공인 중 악사의 복식은 복두에 비공복, 금동혁대, 비백대대, 오피리로 구성되었고, 악생은 개책에 비수란삼, 협고, 말대, 말, 오피리로 구성되었다. 이상의 결과로 세종 대에 의례복식이 의제화되는 과정을 확인할 수 있었다. 배표의에 참여하는 왕 이하 왕세자, 문무백관, 사자, 별감, 시위군, 공인 모두 각 품계에 맞는 최고 등급의 예복을 착용하였다. 세종은 유교를 바탕으로 한 국가를 건설하고자 거듭된 논의를 거쳐 각 의례와 그에 따른 복식을 정비하였고, 배표의 복식도 직책별로 체계적으로 갖추어졌다. 세종 대에 정리된 의례복식은 예전에 규정화되어 조선 후기까지 이어질 수 있는 기틀이 되었다.

• 한국경영과학회:학술대회논문집
• /
• 대한산업공학회/한국경영과학회 1993년도 춘계공동학술대회 발표논문 및 초록집; 계명대학교, 대구; 30 Apr.-1 May 1993
• /
• pp.399-399
• /
• 1993

• 한국해양학회지
• /
• 제15권1호
• /
• pp.58-61
• /
• 1980

Water movements at nine different layers were observed from July 31 to August 2, 1976 at station H, which has water depth 42 meters and 3km far from the coast of Wolsong, and dispersion coefficients were computed from these current data, then relative magnitudes of dispersion coefficients were calculated at each layers. Relative magnitudes of dispersion coefficients based on the surface value are 62% at 5m layer, 24% at 10m layer, 20% at 15m and 20m layers, 17% at 25m layer, 24% at 30m layer, 28% at 35m layer and 15% at bottom layer, respectively.

• Journal of applied mathematics & informatics
• /
• 제41권6호
• /
• pp.1173-1180
• /
• 2023

In this paper, rings in which essential maximal right ideals are GP-injective are studied. Whether the rings with this condition satisfy von Neumann regularity is the goal of this study. The obtained research results are twofold: First, it was shown that this regularity holds even when the reduced ring is replaced with π-IFP and NI-ring. Second, it was shown that this regularity also holds even when the maximal right ideal is changed to GW-ideal. This can be interpreted as an extension of the existing results.

• 한국해양학회지
• /
• 제9권1_2호
• /
• pp.59-64
• /
• 1974

바닷물의 광학적 특성을 조사, 연구하는 것은 해양 물리학적인 견지에서 뿐만 아니라 해양 생물학 또는 해양 지질학 분야에서도 꼭 필요하다. 특별히 해양의 기초 생산에서는 수중 광선이 절대적인 필요 요건으로 되어 있으며 해수의 소산계수가 변화하는 것을 가지고 환경 오염을 비교검토할 수 있다.(Ochakovsky, 1966; Jerlov, 1968). 본 연구는 교통부 수로국에서 1971년 4월에서 6월에 걸친 영일만 및 부근 일대 해양 관측시에 수중 조도계를 제작하여 1971년 5월 6일에 영일만 입구의 9개 관측점 에서 조사한 것을 분석하였다. 우리나라 연안이나 근해에서는 아직까지 해수의 광학적인 특성을 가지고 수괴의 분석이나 해황을 설명한 일이 없으며 앞으로 가동될 포항 종합제철 공장이 영일만의 잠재적인 오염원이 될 수 있으므로 이 공장의 가동 전에 영일만에서의 해양광학적인 조사를 하여 이 해역에서 오염 문제를 연구할 때의 기초적인 자료로 제공하고자 한다.

• 품질경영학회지
• /
• 제42권4호
• /
• pp.563-578
• /
• 2014

Purpose: The purpose of this paper is integrated tolerance design process by advantages of engineering design and 6 sigma statistical tolerances design. Methods: Integrated tolerance design process can determine the goals by using engineer's experience and clarify tolerance by 6 Sigma statistical methods. Integrated design process can be applied by using non-linear simulations. Results: We applied integrated design process to the optical disc drive spindle motor and get good result. Conclusion: If this method is applied test method in the early stages of development, then Design can be reduced development time and cost.

• Journal of Electrical Engineering and Technology
• /
• 제9권1호
• /
• pp.268-272
• /
• 2014

This letter presents a measurement methodology of the complex permittivity of liquid using a partially open cavity in narrow band. The partially open cavity (POC) can measure dielectric small changes caused by the temperature variation of the liquid inside the cavity as well. Using the resonance frequency and unloaded quality factor of the proposed POC, the complex permittivity is evaluated. The apertures on the walls of the cavity are designed to circulate the liquid inside to outside of the POC and located at the corner area of the cavity to minimize the disturbance of field distribution at the dominant mode. The results measured by the proposed POC were compared with those by the conventional open-ended probe and Cole-Cole equation. The POC showed better performance in measuring small dielectric constant changes than the open-ended probe.

• 품질경영학회지
• /
• 제45권4호
• /
• pp.739-760
• /
• 2017

Purpose: This paper proposes Korean Quality Management that is appropriate for the 4th Industrial Revolution era. Methods: The author reviewed Quality, TQC, CWQC, and TQM. In addition, the author surveyed the actual condition of quality with a particular focus on Korean SMEs. Several research papers were examined and the author proposed Korean Quality Management for the Korean industrial environment. Results: The author identified and outlined the definition, purpose, system and characteristics of Korean Quality Management specifically tailored to the Korean industrial environment. Conclusion: There is still work to demonstrate the effectiveness of applying Korean Quality Management to Korean SMEs. It is expected that continuous improvement of Korean Quality Management will help quality competitiveness in Korean SMEs.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.489-498
• /
• 2015

Purpose: This paper proposes S-NS diagram. S-NS diagram helps us find core factors which improve customer satisfaction. Methods: S-NS diagram draws a scatter diagram based on marks obtained from surveys consisting of several questions on satisfaction and non-satisfaction at the same time. S-NS diagram is divided into the 4 regions. We focused on region B which is High satisfaction and high non-satisfaction shown in S-NS diagram. Region B is the areas for needs to improve. Results: S-NS diagram can find few important factors which affect customer satisfaction. We improve Lecture Satisfaction using S-NS Diagram. Conclusion: S-NS diagram has been proven to be an effective method for improving customer satisfaction with a lecture satisfaction improvement example. We know S-NS diagram can use many fields including manufacture and service areas.