• 대한조선학회 특별논문집
• /
• 대한조선학회 2015년도 특별논문집
• /
• pp.85-92
• /
• 2015

In general, when ships are designed, structural strength and fatigue strength must be verified based on the relative rules respectively. In case of Slurry Iron Sand Carrier designed to carry Iron-Sand saturated at water content, there is no special consideration of fatigue strength analysis. However, this vessel is similar to Ore Carrier in consideration of the overall characteristics of loaded cargo and the shape of cargo hold. Therefore we verified fatigue strength based on fatigue analysis procedure of ore carrier in DNV Rules and carried out the study for improving of fatigue strength of Slurry Iron Sand Carrier.

• 대한조선학회지
• /
• 제53권2호
• /
• pp.42-49
• /
• 2016

• 한국물환경학회지
• /
• 제31권2호
• /
• pp.209-215
• /
• 2015

The purpose of this study is to evaluate the characteristic of the iron oxide carrier for removing arsenic contained in the groundwater. 4 types of iron oxide carrier used in the study is iron oxide coated sand carrier (IOCSC), iron oxide coated zeolite carrier (IOCZC), iron oxide plasticity carrier (IOPC) and platinum iron oxide plasticity carrier (PIOPC). The results of this study, IOPC is showed high arsenic adsorption strength and the maximum amount of adsorption than the IOCC. Based on the results of the arsenic adsorption characteristic, by using IOCC was conducted to column test. As a result, PIOPC is showed a high arsenic adsorption amount than IOPC, it was found that the time required to reach the breakthrough point is also extended. Therefore it is determined that stably compliance with water quality standards enhanced drinking water when using the PIOPC.

• 해양환경안전학회지
• /
• 제18권5호
• /
• pp.439-445
• /
• 2012

모래운반선은 호퍼도어를 갖는 경우 제한된 범위내에서 창구덮개의 설치를 면제 받을 수 있으나, 현재 국내에는 호퍼도어를 갖고 있는 선박이 단 한척도 없어 창구덮개를 면제받는 선박이 없는 실정이다. 따라서 모래운반선의 창구덮개 관련 현행 규정의 검토와 사고사례 조사 그리고 현재 운항하고 있는 모래운반선에 대한 설비현황, 복원성능 및 내항성능 평가를 통하여 모래운반선에 대한 창구덮개 면제 조건을 검토하였다. 그 결과, 모래운반선의 경우 창구덮개를 면제 받기 위해서는 화물창의 크기를 조정하여 모래를 화물창 상단부까지 가득 싣더라도 흘수가 만재흘수선을 넘지 않도록 하고, 적절한 풍우밀 조치를 취함으로써 충분한 예비 부력과 복원력 확보가 요구된다. 또한, 배수펌프의 용량은 화물창의 액상상태인 모래를 1시간 이내에 소성상태가 될 수 있도록 배수하기에 충분한 용량이어야 하며, 모든 운항상태에서 작동 가능하여야 한다. 본 연구는 모래운반선의 작업 특성상 창구덮개의 설치작업이 현실적으로 상당히 어렵고, 특히 기상악화시 인명사고로 이어질 수 있는 현실적인 문제점을 항해안전과 관련된 시설기준을 보다 강화함으로써 개선한 것이다.

• Computers and Concrete
• /
• 제21권2호
• /
• pp.139-147
• /
• 2018

Due to enhanced construction requirement, ready mixed concrete are being popular day by day. The current study aimed to develop ready mixed concrete using GBFS contained cement and determine its properties of fresh and hardened states. A real scale experiment was set up in a ready mixed plant for measuring workability and compressive strength. The workability was tested after mixing (within 5 minutes), 30, 60, 90, 120 and 150 minutes of the running of bulk carrier. The ready mixed carrier employed spinning motion i.e., rotating around its axis with 20 RPM and running on road with 1km/h speed. The mixing ratio of cement: sand:gravel, water to cement ratio, super plasticizer were, 1:1.73:2.47, 0.40 and 6% of cement, respectively. The chemical composition of raw material was determined using XRF and the properties of cements were measured according to ASTM standards. The experimental results confirm that the cement with composition of 6.89% of GBFS, 4% of Gypsum and 89.11% of clinker showed the good compressive strength and workability of concrete after 150 minutes of the spinning motion in bulk carrier.

• 청정기술
• /
• 제29권3호
• /
• pp.185-192
• /
• 2023

본 연구는 '열매체 및 가스 순환형 열분해 시스템' 개발 목적으로 열분해 실험을 진행하기 전, 공정 모사용 기본 데이터 확보를 위해 수행되었다. 폐플라스틱 대체 물질로 폴리프로필렌(Polypropylene, PP)을 열분해 시료로 사용하였으며, 본 시스템에서 열전달 매체로 활용되는 유동사(이하 sand)를 사용하였다. 촉매 열분해 실험을 수행하기 위해 Mn계 물질(이하 Mn)을 촉매로 선택하였으며, sand에 담지하여 촉매 열분해 실험을 수행하였다. 열중량 분석기(Thermogravimetric analyzer, TGA)를 이용하여 PP의 기본 물성을 분석하였고, 질소 분위기 600℃ 조건에서 촉매 열분해를 통해 액상 오일을 생성하였다. 생성된 액상 오일은 GC/MS 분석을 통해 탄소 수 분포를 확인하였다. 본 연구에서는 Mn 담지 유무와 함량 변화에 따른 액상 오일 수율과 오일 내 탄화수소 분포에 미치는 영향을 조사하였다. Mn/sand를 이용하면 sand를 단독으로 활용한 열분해와 비교하여 잔여물이 감소하고 오일 수율이 증가하였다. 또한 Mn 함량 증가에 따라 액상 오일 내 C₆~C₉ 범위 휘발유 비율이 점차 증가하였으며, 오일 내 C₁₀보다 탄소 수가 큰 경유 및 heavy 오일 분포가 감소하는 것으로 확인되었다. 종합하면, Mn을 촉매로 활용하고 함량 변화를 통해 액상 오일 회수량을 증가시키고 생성물 내 휘발유 비율을 증가시킬 수 있을 것으로 판단하였다.

• 한국대기환경학회지
• /
• 제19권5호
• /
• pp.469-490
• /
• 2003

Atmospheric concentrations of persistent organic pollutants (POPs) were measured at Gosan, Jeju in November 2001 and spring 2002, each time for two weeks. Primary target pollutants were organochlorine pesticides, coplanar polychlorinated biphenyls (co- PCBs), and dioxin/furans listed in the Stockholm Convention adopted in May 2001. Polycyclic aromatic hydrocarbons (PAHs) were also measured in order to understand the overall characteristics of the POPs distribution as well as PM$_{2.5}$, a potent carrier of POPs. In the latter part of the measurement period of November 2001, almost every pollutant of combustion origin including dioxin/furans went high probably due to influence of emissions in the nearby area. The characteristics of atmospheric environment at Gosan in this period were rather close to urban areas far from those of a background area. A severe dust storm swept for three days at the end of the measurement period of spring 2002. However, changes in pollutant concentrations were relatively small except PM$_{10}$. Nevertheless, increases in particulate PAHs and OCDD (octachlorinated dibenzo-p-dioxins), mostly present in fine particles, were observed. Trends in organochlorine pesticide variations were mixed although possible volatilization of DDT residues from soil was inferred from the measurements of spring 2002.2.2.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제11권1호
• /
• pp.462-473
• /
• 2019

The effects of the location and dimension of the gate, location, and volume of the feeder, application of a chill, chill volume, and heating method of the feeder with respect to the effect of the mold-designing technologies on the defect status of the products are described. It is possible to increase the solidification time of the feeder by heating feeder. Furthermore, the pressure generated from the feeder is imposed on a product, and this decreases the generation of shrinkage porosities. In this study, two types of gating and feeding systems had been proposed: the bottom L-type junctions and the top L-type junctions. Additionally, solidification behaviors, such as solidification time, shrinkage porosities, weight percentage of chill system to product, hot spot, and solidification time ratio (=Solidification time of feeder/solidification time of product), are extensively analyzed by using commercial casting simulation software. Based on the solidification behaviors, reasonable mold design, feeding system, critical feeder heating temperature, and solidification time ratios are proposed in the sand casting process for the fabrication of carrier housing in order to reduce the casting defects and to increase the recovery rate.

• Current Research on Agriculture and Life Sciences
• /
• 제2권
• /
• pp.56-62
• /
• 1984

Butachlor를 유제(乳劑)와 입제(粒劑)로 제제화(製劑化)할 때 화학적(化學的) 안정성(安定性)과 약효(藥效)에 영향(影響)을 미치는 요인(要因) 중(中) 수분(水分), pH, 담체(擔體), 유화제(乳化劑) 및 유기용제등(有機溶劑等)으로 제제조성(製劑組成)을 달리 했을 때와 자외선조사시(紫外線照射時)의 주성분(主成分) 경시변화(經時變化)에 미치는 영향(影響)을 조사(調査)한 결과(結果)는 다음과 같았다. 제제형태(製劑形態)에 따른 경시변화율(經時變化率)은 암실보관시(暗室保管時)에는 제형(製形)에 상관(相關)없이 16시간(時間) 후(後)까지 안정(安定)하였으나 자외선조사시(紫外線照射時)에는 주성분(主成分) 분해율(分解率)이 유제(乳劑) > sand 피복입제(被覆粒劑) > zeolite 흡착입제(吸着粒劑)의 순(順)으로 나타났다. 물과 pH를 조절(調節)한 후(後)의 유탁액상태(乳濁液狀態)에서는 주성분(主成分)의 분해(分解)가 거의 일어나지 않았다. 유기용제(有機溶劑)로 유제(乳劑)를 조제(調劑)하여 $50^{\circ}C$에서 보관(保管)시킨 후(後)의 주성분(主成分) 분해율(分解率)은 극성유기용제(極性有機溶劑)인 benzene, xylene이 비극성유기용제(非極性有機溶劑)인 iso-propyl alcohol 보다 높은 것으로 나타났다. 유화제(乳化劑)의 종류(種類)에 따른 주성분(主成分) 분해율(分解率)은 Tween 60이 Hy-620C 및 Newkalgen-MC에 비(比)해 높게 나타났다.

• 한국조리학회지
• /
• 제3권
• /
• pp.271-289
• /
• 1997

The purpose of this study is to investigate previous data and possibility of the new culture building, insuring substantiality of the education in junior college, increasing of practical carrier, acquiring the money for practical class, and the direction of demand for education in a high level of industrial society. There's two parts to consist of investigation and the model case in wedding business in Junior college. The research groups in one part consist of 277 students in Junior college. The result were as follows: 1) The students would like to get the wedding business in new culture building. (72%) 2) The student shave got a idea to recommend to use the wedding facilities for their for their relative sand friends. (51%) 3) The trend of selecting in wedding facilities is outside than inside of facilities. (75%) 4) They would like to have the buffet service after wedding celemony, not a la carte for choose the meal. The above research data suggest that if the wedding facility's management would be accept, we could have expectation about development of junior college, emphasis of practical education and good wedding culture in this areas. For the most of student, they has a righ hand to manage the wedding facility in their college. First, the culinary students could have an experience of service practies to the customer in wedding celemony, as the result of training will be great. Second, the college could show their vision and hope to customer to interest it. Third, it can be supplied the right wedding culture and the wedding facilities which is low price and good circumstance for wedding. Fourth, it's very resonable to use the culture facilities during no class, Saturday and Sunday. Fifth, income from business can be used only a scholarship and a community development. Sixth, it can be induced the self-participication and motivation to take up a positive attitude for their life.