• Journal of the Korean Data and Information Science Society
• /
• 제26권4호
• /
• pp.997-1006
• /
• 2015

In industrial quality control, when engineers use VSI control procedure they should consider both required time to signal and switching behaviors together in the case of production process changed. Up to the present, many researchers have studied fixed sampling interval (FSI) chart and variable sampling interval (VSI) chart in the points of average number of samples to signal (ANSS) and average time to signal (ATS). However, ANSS and ATS do not provide any switching information between different sampling intervals of VSI schemes. In this study, performances of two sampling intervals VSI chart and three sampling intervals VSI chart are evaluated and compared. The numerical results show that ANSS and ATS values of two sampling intervals VSI chart and three sampling interval VSI chart are similar regardless the amount of shifts. However, the values of switching behaviors including ANSW are less efficient in three sampling intervals VSI charts than in two sampling intervals VSI chart.

• Journal of Ecology and Environment
• /
• 제30권2호
• /
• pp.201-207
• /
• 2007

Researchers have used a variety of methods to measure patterns of animal movement, including the use of spatial data (mapping the position of a moving animal at specified intervals) and direct estimation of travel path length by pacing under a moving animal or group. I collected movement data from five groups of siamangs (Symphalangus syndactylus) using two different methods concurrently to estimate the effects of the method of data collection on estimates of daily path length (DPL). Estimates of DPL produced from spatial data collected at 15-minute intervals were 12% lower than estimates of DPL produced by pacing under the traveling animal. The actual magnitude of the difference was correlated with the travel distance, but there was no correlation between the proportional difference and the travel distance. While the collection of spatial data is generally preferable, as spatial data permit additional analyses of patterns of movements in two or three dimensions, the relatively small difference between the DPL's produced using different methods suggests that pacing is an acceptable substitute where the collection of spatial data is impractical. I also subsampled the spatial data at increasing time intervals to assess the effect of sampling interval on the calculation of daily path lengths. Longer sampling intervals produced significantly shorter estimates of travel paths than shorter sampling intervals. These results suggest that spatial data should be collected at short time intervals wherever possible, and that sampling intervals should not exceed 30 minutes. Researchers should be cautious when comparing data generated using different methods.

• 한국산업경영시스템학회:학술대회논문집
• /
• 한국산업경영시스템학회 2002년도 춘계학술대회
• /
• pp.359-364
• /
• 2002

In case of pn control chart often used in mass production system of plant industry and so on, we could evaluate it's performance by the approximation to normal distribution. It has many differences according to sample sizes and defective fraction, and have disadvantage that needs much samples to use the normal distribution approximation. Existent control charts can not detect the cause of process something wrong because it is taking the sampling intervals of fixed length about all times from the process. Therefore, to overcome this shortcoming we use VSI(variable sampling intervals) techniques in this paper. This technique takes a long sampling interval to have the next sampling point if the sample point is in stable state, and if the sample point is near control lines, it takes short sampling interval because the probability to escape control limit is high. To analyze performance of pn control charts that have existent fixed sampling intervals(FSI) and that use VSI technique, we compare ATS of two charts, and analyze the performance of each control chart by the sample sizes, process fraction defective and control limits that Ryan and Schwertman had proposed.

• Communications for Statistical Applications and Methods
• /
• 제23권2호
• /
• pp.119-129
• /
• 2016

A new sampling method is introduced based on the idea of a ranked set sampling scheme in which taken samples in each set are dependent on previous ones. Some theoretical results are presented and distribution-free confidence intervals are derived for the quantiles of any continuous population. It is shown numerically that the proposed sampling scheme may lead to 95% confidence intervals (especially for extreme quantiles) that cannot be found based on the ordinary ranked set sampling scheme presented by Chen (2000) and Balakrishnan and Li (2006). Optimality aspects of this scheme are investigated for both coverage probability and minimum expected length criteria. A real data set is also used to illustrate the proposed procedure. Conclusions are eventually stated.

• 한국환경보건학회지
• /
• 제26권3호
• /
• pp.50-54
• /
• 2000

Ventilation rates can be measured directly by a tracer decay method, although little is known of the effects of different sampling intervals on decay rte calculations. This study determined variations in decay rates calculated by three techniques using residential ozone decay data. The calculation techniques were a regression technique, decay techniques using half-life and average-life, and finite difference techniques using two different time intervals. Variation associated with regression technique calculations for residential ozone decay rates based on data from both sample intervals were within 10% (2.81$\pm$1.88 hr-1). However, both half-life and finite difference technique calculations using a shorter-time interval were significantly different from those obtained with the regression technique(p<0.05). Therefore, the use of short sampling intervals in tracer decay may cause significant error in decay rate calculations.

• Journal of the Korean Data and Information Science Society
• /
• 제10권2호
• /
• pp.465-472
• /
• 1999

We considered a bootstrap method for constructing confidenc intervals for a one parameter model using multinomial sampling. The convergence rates or the proposed bootstrap method are calculated for model-based maximum likelihood estimators(MLE) using multinomial sampling. Monte Carlo simulation was used to compare the performance of bootstrap methods with normal approximations in terms of the average coverage probability criterion.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.552-557
• /
• 1998

Sampling schemes are intended for use in situations where stream-flow data are collected regularly, but concentration data are collected during only a limited number of time periods. Estimating water pollutant loading considering sampling intervals is presented, and for illustrative purposes the criterion is applied to the sampling station HS#3 of the Balan-reservoir watershed which is located at the southwest of Suwon. The stratification is employed uniformly for all sampling strategies in that the strata boundaries are defined using the actual distribution of flow values and the selected nonexceedence probabilities to minimize inaccuracy. Ratio estimator for SS, T-N, and T-P were used in order to calculate the water pollutant loading. A sampling scheme incorporating stratified sampling with real-time of the sampling characteristics is found to give the appropriate estimate of the mass load.

• Journal of the Korean Statistical Society
• /
• 제36권2호
• /
• pp.275-284
• /
• 2007

Confidence intervals for the population proportion in a double sampling scheme subject to false-positive misclassification are considered. The confidence intervals are obtained by applying Agresti and Coull's approach, so-called "adding two-failures and two successes". They are compared in terms of coverage probabilities and expected widths with the Wald interval and the confidence interval given by Boese et al. (2006). The latter one is a test-based confidence interval and is known to have good properties. It is shown that the Agresti and Coull's approach provides a relatively simple but effective confidence interval.

• Communications for Statistical Applications and Methods
• /
• 제16권3호
• /
• pp.501-509
• /
• 2009

Recently the interval estimation of binomial proportions is revisited in various literatures. This is mainly due to the erratic behavior of the coverage probability of the well-known Wald confidence interval. Various alternatives have been proposed. Among them, the Agresti-Coull confidence interval, the Wilson confidence interval and the Bayes confidence interval resulting from the noninformative Jefferys prior were recommended by Brown et al. (2001). However, unlike the binomial distribution case, little is known about the properties of the confidence intervals in finite population sampling. In this note, the property of confidence intervals is investigated in anile population sampling.

• Journal of the Korean Statistical Society
• /
• 제31권4호
• /
• pp.415-431
• /
• 2002

A unified framework for statistical inference for the mean of the normal distribution to derive point estimates, confidence intervals and statistical tests is proposed. This optimal design is justified after investigating the basic information and requirements that are possible and impossible to control when specifying practical and statistical requirements. Point estimation is only credible when viewed in the larger context of interval estimation, since the information required for optimal point estimation is unspecifiable. Triple sampling is proposed and justified as a reasonable sampling vehicle to achieve the specifiable requirements within the unified framework.