• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.522-529
• /
• 2005

The commercial service of KTX from April 1st 2004 has realized that whole country has shrunk into half-day life zone and it opened the times of speed. However, some technical problems unexpected before service have been raised and, among them, the noise generation at train passing was claimed by the residents living nearby the track and it is often publicized by the broadcastings and newspapers. In case where the residential area is close to the track, the installation of noise barrier at trackside is the general measures for noise reduction on bridge section and earthwork section. In case of KTX project, such measures were actually taken without any exception; however, the noise level is still high. In this study, analysis for the reason of higher noise level in spite of which the noise barriers are being installed was carried out, the sample of insulation material effective for noise barrier was manufactured and the performance of the insulation material was evaluated to verify its effectiveness

• 한국실내디자인학회논문집
• /
• 제13권6호
• /
• pp.82-90
• /
• 2004

The purpose of this study is to investigate the remodeling of apartments housing unit according to the area type and size in order to provide useful information for future plans for more consumer-friendly dwelling units. To achieve this goal quantitative data analyses were employed. The sample was a total of 100 apartments analysed in previous researches conducting case studies on apartments remodeling. The data were analyzed by SPSS WIN program package in terms of frequency, percentage, and x2-test. The results of the study are as follows: The change of finishing materials were made in almost all of the sample. 6.4, 8.6 and 10.6 categories were altered in the small, medium, and large apartments respectively out of 21 remodeling categories. In the case of communal areas, change of finishing materials and installation, removal, and change of lighting fixtures were most frequent. The most frequent alteration in private areas was also observed In change of finishing materials and installation, removal and change of lighting fixtures.

• 한국안전학회지
• /
• 제21권6호
• /
• pp.38-45
• /
• 2006

Polymeric floorings mainly consisted of PVC are easily decomposed by many kinds of hot environmental factors, then generate hazardous asphyxiate gases and/or toxic gases etc. Therefore the mechanism of decomposition and quantitative toxic indices of products are very important for preventing safety and health disasters, especially in case of confined area. So we have investigated decomposition kinetics, numbers of process involved, toxicity indices of product and so on, using DSC, TGA, FT-IR and Pyrolyzer-GC/MS. The thermal decomposition process of polymeric floorings can be mainly divided by dehydrochlorinated reaction and polyene decomposition step, and activation energies of those are approximately $53.93{\sim}62.42kcal/mol$. Especially lethal concentration($LC_{50}$), fractional effective dose (FED) are calculated by measuring the amount of decomposition product. The values on $LC_{50}$ of sample G are ranged $2,003{\sim}2,019(mg/m^{3})$ in case of sample K and H are $1,877,\;1,998(g/m^{3})$ respectively. Even if the results are estimated by calculation method without animal test and/or clinical demonstration, these values could be very useful data for occupational health, hygiene and safety control.

• Macromolecular Research
• /
• 제8권3호
• /
• pp.103-115
• /
• 2000

The structural changes viewed from the molecular level have been investigated for the isothermal crystallization phenomena of polyethylene (PE) and the solvent-induced crystallization phenomenon of syndiotactic polystyrene (sPS) glassy sample. The data, which were collected by the time-resolved measurements of Fourier-transform infrared spectra, Raman spectra, synchrotron-sourced small-angle X-ray scattering, wide-angle X-ray scattering, and so on, were combined together to extract the detailed structural information in these phase transition phenomena. In the case of PE, the isothermal crystallization from the melt to the orthorhombic form was found to occur via the conformationally-disordered trans chain form, followed by the formation of the lamellar stacking structure of regular orthorhombic-type crystals. In the case of sPS, the amorphous chains in the glassy sample were found to enhance the mobility through the interaction with the injected solvent molecules, which act as a trigger to cause the conformational ordering from the random coil to the regular T$_2$G$_2$-type helical form. The thus created short helical segments were found to grow into longer helices, which gathered together to form the crystallites, as revealed by the organized coupling of the infrared, Raman and X-ray scattering data.

• 한국조사연구학회지:조사연구
• /
• 제3권2호
• /
• pp.77-90
• /
• 2002

본 논문은 임의표집법(Random Sampling)에 의거한 전화조사방법을 2002년 울산시장선거조사에 적용하여 실시한 사례를 다루었다. 임의로 표집된 1,233개 가정용 전화번호에 전화하여 생일법으로 추출된 응답자를 대상으로 최대 5회에 걸쳐 접촉을 시도하였다. 최대 5회 전화시도의 접촉 차수를 분석하여 부재와 약속 등에 대한 재접촉의 효과를 살펴보고, 표집된 표본집단의 인구사회학적 특성을 모집단과 비교하였으며 조사결과와 실제 투표결과와의 비교도 다양하게 검토하였다. 또한 생일법을 통한 임의표집법의 어려움과 조사시간대 조정 및 지속적 재접촉 등 임의표집법 활성화 방안에 대해 논의한다.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.148-155
• /
• 2011

This study analyzes stress, fatigue and vibration at clutch on the rotation of wheel. Eigenfrequencies from 1'st to 6'th order about clutch assembly are shown with the vibration at more than 800Hz. Maximum equivalent stress is shown with the frequency of 800Hz in case of the harmonic vibration applied with force. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'Sample History' with the average stress of 0MPa to $-10^5$ MPa and the amplitude stress of 0MPa to $10^5$ MPa, the possibility of maximum damage becomes 3.23%. This stress state can be shown with 6 times more than the damage possibility of 'SAE bracket history' or 'SAE transmission'. The structural result of this study can be effectively utilized with the safe design of clutch.

• 대한안전경영과학회지
• /
• 제15권1호
• /
• pp.283-292
• /
• 2013

This paper aims to propose a new steps of hypothesis testing using analysis process and improvement process in the six sigma DMAIC. The six sigma implementation models proposed in this paper consist of six steps. The first step is to establish a research hypothesis by specification directionality and FBP(Falsibility By Popper). The second step is to translate the research hypothesis such as RHAT(Research Hypothesis Absent Type) and RHPT(Research Hypothesis Present Type) into statistical hypothesis such as $H_0$(Null Hypothesis) and $H_1$(Alternative Hypothesis). The third step is to implement statistical hypothesis testing by PBC(Proof By Contradiction) and proper sample size. The fourth step is to interpret the result of statistical hypothesis test. The fifth step is to establish the best conditions of product and process conditions by experimental optimization and interval estimation. The sixth step is to draw a conclusion by considering practical significance and statistical significance. Important for both quality practitioners and academicians, case analysis on six sigma projects with implementation guidelines are provided.

• International Journal of Contents
• /
• 제5권1호
• /
• pp.37-45
• /
• 2009

This paper empirically tests pecking order theory. Korean listed firms are used as the samples. On the whole we find supportive results for pecking order theory. The fixed effect model on the whole period shows that as pecking order theory suggests that debt ratio decreases as cash flow. ROA, physical assets, and firm size increase. Again, it is shown that corporate debt ratio significantly decreases as cash flow or ROA increases in every sub-sample, which coincides with the prediction of pecking order theory. Corporate debt ratio significantly decreases as physical assets or jinn size increases in case of the whole sample, pre-financial crisis period, and the sub-samples by q-ratio, which also supports the prediction of pecking order theory. Statistical significance of the coefficients of physical assets or firm size completely disappears after Korean financial crisis. Perhaps it is because the role of physical assets or firm size as a mitigator of information asymmetry significantly weakens after the financial crisis as Korean financial market becomes more transparent. For small firms only size variable is negatively and significantly related with debt to assets. It seems that size is an important factor for smaller firms in making financing decision.

• 한국전기전자재료학회논문지
• /
• 제26권1호
• /
• pp.27-32
• /
• 2013

According to the composition of LTCC material, though it was thought that bulk defect which was made in forming process effects on the densification during the sintering, it was not reported systemically. In this study, we evaluated crystal structure, 3 point bending strength, hardness and microstructure of the samples by uniaxial pressing and tape casting using the commercial powders of the crystallizing glass and the glass/ceramic composite. In the case of glass/ceramic composite, Viox-001 powder with residual glass in the sintering, 3 point bending strength was similar regardless of forming process due to fill the bulk defect by residual glass. In the case of crystallizing glass, MLS-22, because glass phase was small in the sintering, glass did not fill the pore in the sample by uniaxial pressing process, therefore, the 3 point bending strength of it was 167 MPa. However, the 3 point bending strength of the sample by tape casting was 352 MPa and much higher. Meanwhile, crystal structure and hardness were similar regardless of forming process.

• Korean Chemical Engineering Research
• /
• 제55권2호
• /
• pp.195-200
• /
• 2017

사고 대응 가이드라인은 사고 발생 시 그 영향을 줄이기 위한 수단으로 중요한 역할을 한다. 유용한 사고 대응 가이드라인의 개발을 위하여 개발 절차에 공학적 방법론의 적용이 필요하다. 본 논문에서는 기존에 존재하는 사고 대응 가이드라인 작성 방법론에 Bow-Tie 기법, 사고 전개 모델, 위험 대응 의사결정 등 위험 관리 기법을 적용하였다. 이러한 방법으로 일반화된 사고 대응 가이드라인 작성 절차를 제안하였으며, 직접적으로 활용할 수 있도록 Sheet를 개발하고, 특정 Case를 적용하여 Sample Guide를 작성하였다.