Browse > Article
http://dx.doi.org/10.4313/JKEM.2013.26.1.27

The Strength of Sintered Body with the Composition and the Forming Process of LTCC Materials  

Gu, Sin Il (Advanced Materials Convergence Division, Korea Institute of Ceramic Engineering and Technology)
Shin, Hyo Soon (Advanced Materials Convergence Division, Korea Institute of Ceramic Engineering and Technology)
Yeo, Dong Hun (Advanced Materials Convergence Division, Korea Institute of Ceramic Engineering and Technology)
Nahm, Sahn (Department of Materials Science and Engineering, Korea University)
Publication Information
Journal of the Korean Institute of Electrical and Electronic Material Engineers / v.26, no.1, 2013 , pp. 27-32 More about this Journal
Abstract
According to the composition of LTCC material, though it was thought that bulk defect which was made in forming process effects on the densification during the sintering, it was not reported systemically. In this study, we evaluated crystal structure, 3 point bending strength, hardness and microstructure of the samples by uniaxial pressing and tape casting using the commercial powders of the crystallizing glass and the glass/ceramic composite. In the case of glass/ceramic composite, Viox-001 powder with residual glass in the sintering, 3 point bending strength was similar regardless of forming process due to fill the bulk defect by residual glass. In the case of crystallizing glass, MLS-22, because glass phase was small in the sintering, glass did not fill the pore in the sample by uniaxial pressing process, therefore, the 3 point bending strength of it was 167 MPa. However, the 3 point bending strength of the sample by tape casting was 352 MPa and much higher. Meanwhile, crystal structure and hardness were similar regardless of forming process.
Keywords
LTCC; Strength; Sintering; Forming;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Y. Imanaka, Multilayered Low Temperature Cofired Ceramics (LTCC) Technology (Springer, New York, 2005) p. 5.
2 B. Schwartz, Am. Ceram. Soc. Bull., 63, 577 (1984).
3 S. J. Hwang and J. H. Kim, Thermochi. Acta, 469, 104 (2006).
4 X. Zhou, E. Li, S. Yang, B. Li, B. Tang, Y. Yuan, and S. Zhang, Ceram. Int., 38, 5551 (2012).   DOI   ScienceOn
5 Y. J. Choi, J. H. Park, W. J. Ko, I. S. Hwang, J. H. Park, and J. G. Park, J. Am. Ceram. Soc., 89, 562 (2006).   DOI   ScienceOn
6 W. Smetana, B. Balluch, G. Stangl, E. Gaubitzer, M. Edetsberger, and G. Kohler, Microelectron. Eng., 84, 1240 (2007).   DOI   ScienceOn
7 E. Blond, N. Schmitt, F. Hild, Ph. Blumenfeld, and J. Poirier, J. Eur. Ceram. Soc., 25, 1819 (2005).   DOI   ScienceOn
8 S. X. Dai, R. F. Huang, and D. L. Wilcox Sr., J. Am. Ceram. Soc., 85, 828 (2002).
9 S. I. Gu, H. S. Shin, Y. W. Hong, D. H. Yeo, J. H. Kim, and S. Nahm, J. KIEEME, 23, 864 (2010).
10 C. L. Lo, J. G. Duh, B. S. Chiou, and W. H. Lee, J. Am. Ceram. Soc., 85, 2230 (2002).   DOI   ScienceOn
11 Z. H. Park, B. O. Park, S. I. Gu, H. S. Shin, D. H. Yeo, and J. H. Kim, J. Kor. Phys. Soc., 53, 2467 (2008).   DOI   ScienceOn
12 D. Chicot, D. Mercier, F. Roudet, K. Silva, M. H. Staia, and J. Lesage, J. Eur. Ceram. Soc., 27, 1905 (2007).   DOI   ScienceOn
13 M. N. Rahaman, Ceramic Processing and Sintering, (Marcel Dekker Inc., New York, 1995) p. 97.