• 터널과지하공간
• /
• 제26권5호
• /
• pp.363-374
• /
• 2016

여러 가지 이유로 단일시험편에서 평면이방성 암석의 5개의 독립적 탄성상수를 결정해야 할 경우, Saint-Venant 근사식은 오랫동안 매우 유용하게 사용되어 왔다. 본 논문은 이 경험적 수식이 겉보기 탄성계수로 표현되는 수식으로 전환될 수 있음을 탄성이론에 근거한 수학적 전개를 통하여 밝히고 있다. 이렇게 전환된 수식은 이방성 각도에 단조증가하는 특성을 갖고 있으며, 이방성 암반의 초기응력측정에 유용하게 사용될 것이다. 문헌의 자료를 분석한 결과, $G^2$의 측정값은 각도와 관계없이 일정한 크기이며, Saint-Venant 근사식에 의하여 유도된 값보다 작은 것으로 분석되었다. 이러한 감분은 층상의 경계면에서 미끄러짐에 의하여 발생하는 것으로 판단되며, 미끄러짐에 의한 감소비율은 층상의 결합상태와 암석의 강도에 따라 유추될 수 있다. 이러한 분석들이 향후에 계속되어 자료가 누적된다면 감소비율을 규정할 수 있고, Saint-Venant 근사식의 수정을 통하여 단일시험편으로부터 탄성상수를 결정할 수 있을 것이다.

• KSTLE International Journal
• /
• 제2권1호
• /
• pp.29-34
• /
• 2001

The stress field in a body caused by the tangential loading of a rectangular patch on a semi-infinite solid has been solved analytically using a potential function. The validity of the results of this study was preyed by Saint-Venant's principle in the remote region and by the superposition of point loads in the vicinity of the surface.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.20-29
• /
• 1999

The stress field in the body by tangential loading of a rectangular patch on a semi-infinite solid has been solved analytically using Boussinesque's potential function. Its validity was proved by saint-venant's principle in remote region of the and in the vicinity of the surface with superposition of point loads.

• 대한기계학회논문집A
• /
• 제24권4호
• /
• pp.1032-1038
• /
• 2000

The stress field in the body by tangential loading of a rectangular patch on a semi-infinite solid has been solved analytically using potential function. The validity of result of this study was proved by Saint-Venant's principle in the remote region and in the vicinity of the surface with superposition of point loads.

• 대한조선학회지
• /
• 제9권2호
• /
• pp.21-32
• /
• 1972

The problems of thermal stress and residual stress in resistance spot welding are studied from two standpoint namely, effect of temperature distributions and effect of the radius of free boundary. The radius of the region where the temperature distributions are occured is taken as a function of time after welding and as a finite size, 6 times of heated zone. The region of the radial stress distribution is treated as a function of time under Saint-Venant's principle and 6 or 12 times of originally heated zone. Thermal stresses and strains are obtained by analytic solution under constant mechanical properties and by the finite difference method for varing properties under temperature variation. From the computed results following conclusions are derived (1) For the engineering purpose, the region of temperature distribution and stress distribution can be treated as a finite region, $R=r_o=6r_e$ (2) If the maximum temperature of the aluminum alloy plate is less than $500^{\circ}F$, thermal stresses and strains can be obtained with constant mechanical properties. (3) The residual stresses and strains will be remained in welds and its vicinity.

• Steel and Composite Structures
• /
• 제7권3호
• /
• pp.241-251
• /
• 2007

The purpose of this study is to calculate the torsional rigidity of arbitrarily shaped composite sections on the basis of hybrid finite element approach. An analogy is used between the torsion problem and deformation of a plate which exhibits only shear behavior. In the analysis a simple hybrid finite element based on Hellinger-Reissner functional is presented and a set of numerical examples are performed to demonstrate and asses the performance of the developed element in practical applications.