• Journal of Korean Home Economics Education Association
• /
• v.32 no.3
• /
• pp.111-133
• /
• 2020

The purpose of this study is to analyze the contents of global citizenship education in the 2015 revision of Home Economics textbook and examine the relevance of global citizenship education in the subject of Home Economics. To this end, the contents of global citizenship education included in the 2015 revision of middle school Home Economics textbook were extracted and analyzed from the viewpoint of the UNESCO Topics and Learning Objectives (TLO), according to the procedure of the concurrent triangulation design. When the frequencies of inclusion of the 9 topics of TLOs were counted, about 54.6% of global citizenship education(GCED) content covered in the 2015 revision of Home Economics textbooks in total was related to the socio-emotional aspects. In particular, TLO 4 (Different levels of identity) showed the highest ratio, followed by TLO 5(Different communities people belong to and how these are connected) and TLO 1 (Local, national and global systems and structures). As a result of categorizing global citizenship education learning topics extracted from Home Economics textbooks of middle school by Home Economics sub-topic area, the child and family(94) area showed the greatest relevance to all learning topics. Food and nutrition(13), clothing(13), housing(15), and consumption (14) showed similar distributions of learning subjects. Child and family area is related to global citizenship education in the topics of adolescent development and its characteristics, family relations, sexual and domestic violences prevention, change in family structures and healthy families, aging society and work-family balance, and life planning and career exploration. The food and nutrition area is related to global citizenship education in the topics of nutrition and eating behavior, and adolescents' food selection and safe cooking. The topic of clothing management and recycling of clothing area, housing culture, residential space utilization, and residential life and safety of housing area, consumer life in adolescence of consumption area were related to the learning subject of global citizenship education. As such, high relations between GCED learning topics and Home Economics learning content elements were found. It is expected that the data of this study will be used as basic data for program development, class improvement, and textbook development with global citizenship education as a content element in Home Economics education.

• Korean Security Journal
• /
• no.21
• /
• pp.155-175
• /
• 2009

RFID that provide automatic identification by reading a tag attached to material through radio frequency without direct touch has some specification, such as rapid identification, long distance identification and penetration, so it is being used for distribution, transportation and safety by using the frequency of 125KHz, 134KHz, 13.56MHz, 433.92MHz, 900MHz, and 2.45GHz. Also it is one of main part of Ubiquitous that means connecting to net-work any time and any place they want. RFID is expected to be new growth industry worldwide, so Korean government think it as prospective field and promote research project and exhibition business program to linked with industry effectively. RFID could be used for access control of person and vehicle according to section and for personal certify with password. RFID can provide more confident security than magnetic card, so it could be used to prevent forgery of register card, passport and the others. Active RFID could be used for protecting operation service using it's long distance date transmission by application with positioning system. And RFID's identification and tracking function can provide effective visitor management through visitor's register, personal identification, position check and can control visitor's movement in the secure area without their approval. Also RFID can make possible of the efficient management and prevention of loss of carrying equipments and others. RFID could be applied to copying machine to manager and control it's user, copying quantity and It could provide some function such as observation of copy content, access control of user. RFID tag adhered to small storage device prevent carrying out of item using the position tracking function and control carrying-in and carrying-out of material efficiently. magnetic card and smart card have been doing good job in identification and control of person, but RFID can do above functions. RFID is very useful device but we should consider the prevention of privacy during its application.

• Radiation Oncology Journal
• /
• v.23 no.4
• /
• pp.243-252
• /
• 2005

Purpose: Indoor air quality (IAQ) in the radiation treatment center which is generally located underground is important to the health of hospital workers and patients treated over a long period of time. this study was conducted to measure and analyze the factors related to IAQ and subjective symptoms of sick building syndrome, and to establish the causes influencing IAQ and find a solution to the problems. Methods and Materials : Self administrated questionnaire was conducted to check the workers' symptoms and understanding of the work environment. Based on a preliminary investigation, the factors related to IAQ such as temperature, humidity, fine particulate. carbon dioxide, carbon monoxide, formaldehyde, total volatile organic compounds (TVOC), and radon gas were selected and measured for a certain period of time in specific sites where hospital workers stay long in a day. And we also evaluated the surrounding environment and the efficiency of the ventilating system simultaneously, and measured the same factors at the first floor (outdoor) to compare with outdoor all quality, All collected data were assessed by the recommended standard for IAQ of the domestic and international environmental organizations. Results: Hospital workers were discontented with foul odors, humidity and particulate. They complained symptoms related to musculo-skeletal system, neurologic system, and mucosal-irritatation. Most of the factors were not greater than the recommended standard, but the level of TVOC was third or fourth times as much as the measuring level of some offices in the United States. The frequency and the amount of the ventilating system were adequate, however, the problem arising in the position of outdoor-air inlets and indoor-air outlets involved a risk of the indraft of contaminated air. A careful attention was a requirement in handling and keeping chemical substances including a developing solution which has a risk of TVOC emissions, and repositioning the ventilating system was needed to solve the contaminated-air circulation immediately Conclusion We verified that some IAQ-related factors and inadequate ventilating system could cause subjective symptoms in hospital workers. The evaluation of IAQ was surely needed to improve the underground working environments for hospital workers and patients. On the basis of these data, from now on, we should actively engage in designs of the department of radiation oncology or improvement in environments of the existing facilities.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.1
• /
• pp.43-49
• /
• 2017

BACKGROUND: Greenhouse crops are one of agricultural products consumed largely in Korea. Cucumber is a typical example as main vegetables of greenhouse crops. Thus, pesticide residue analysis is an important requirement to guarantee pesticide safety of cucumber. This work was aim to investigate the residues of penthiopyrad and pyriofenone in cucumber after harvest. METHODS AND RESULTS: Cucumber was subjected to treat with penthiopyrad and pyriofenone at a level of recommended dose 0, 1, 2, 3, 5, 7 and 10 days before harvest under greenhouse conditions. The samples were extracted with organic solvent by using a homogenizer and purified on solid phase cartridge column followed by LC-MS/MS analysis. The recovery levels of penthiopyrad and pyriofenoneranged from approximately 81 to 93% with the method limit of 0.005 mg/kg and coefficient of variation less than 10%. Penthiopyrad and pyriofenone were detected at a level less than maximum residue limit in cucumber at 10 days before. The half-lives of penthiopyrad and pyriofenone were determined to 2.4 ~ 2.6 days. CONCLUSION: Penthiopyrad and pyriofenone are suggested to use in cucumber 10 days before harvest to reach their levels less than maximum residue limit.

• The Korean Journal of Pesticide Science
• /
• v.18 no.3
• /
• pp.123-129
• /
• 2014

The present work was aimed to determine the pre-harvest residue limits (PHRLs) and the safety management of commonly used pesticides namely buprofezin and penthiopyrad on oriental melon (Cucumis melon var. makuwa). In this study, the buprofezin (diluted two thousand fold) and penthiopyrad (diluted four thousand fold) were sprayed single time on oriental melon in the cultivation areas Sangju (site 1) and Sungju (site 2). Oriental melon were randomly collected from the both areas at the end of 0 (2 hours after pesticides spaying), 1, 2, 3, 5, 7, 9 and 10 days. For analysis, each samples were partitioned twice (80 and 70 mL) with dichloromethane and purified by florisil SPE cartridge. Finally, the residual amounts of both pesticides in all samples were analyzed using gas chromatography/nitrogen phosphorus detector (GC/NPD). In this study, the method limit of quantification (MLOQ) for both buprofezin and penthiopyrad in oriental melon was found to be $0.01mg\;kg^{-1}$ and their recovery levels were 91.1~98.6% and 90.0~104.6%, respectively. Further, the calculated biological half-life for buprofezin and penthiopyrad in oriental melon were 3.9 and 3.5, and 3.0 and 2.7 days in site 1 and 2, respectively. The results of this study found that the PHRLs for buprofezin and penthiopyrad were 4.24 and $2.31mg\;kg^{-1}$, respectively at 10 days before harvest. Consequently, the present study suggest that the residual amounts of both pesticides will be lower than the maximum residue limits (MRLs) when oriental melon is harvested.

• Clean Technology
• /
• v.21 no.1
• /
• pp.76-82
• /
• 2015

Volatile organic compounds (VOC) free adhesives have been interested by many scientists and engineers due to environmental regulations and the safety of industrial workers. In this work, a series of composites composed with bisphenol A epoxy resin used as solvent, dicyandiamide, and promoter were prepared to investigate the most appropriate molar ratio for steel-steel adhesion. The cured test specimen of each composite were measured with universal testing machine (UTM) to figure out mechanical properties such as tensile strength, Young’s modulus, and elongation. Furthermore, the lap shear strength of the specimen was tested with UTM while impact resistance was measured with Izod impact tester. The composite whose molar ratio of epoxy resin to curing agent is 1 : 0.9 (sample 3), showed better tensile strength, coefficient of elastic modulus, elongation, and impact strength than other composites did. The highest tanδ from dynamic mechanical analysis (DMA) was observed from sample 2 (epoxy resin: dicy = 1 : 0.7) while sample 3 showed slightly lower tanδ than that of 2. The morphology of the fracture surface of the cured composites from SEM showed that the number of subtle lines on the surface caused by impact increase as the contents of amine curing agent accrete. Furthermore, the viscosity change of sample 5 (epoxy resin: dicy = 1 : 1.3) was observed to confirm its storage stability.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.7
• /
• pp.380-394
• /
• 2015

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2014. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) The research works on the thermal and fluid engineering have been reviewed as groups of heat and mass transfer, cooling and heating, and air-conditioning, the flow inside building rooms, and smoke control on fire. Research issues dealing with duct and pipe were reduced, but flows inside building rooms, and smoke controls were newly added in thermal and fluid engineering research area. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics, pool boiling and condensing heat transfer and industrial heat exchangers. Researches on heat transfer characteristics included the results for thermal contact resistance measurement of metal interface, a fan coil with an oval-type heat exchanger, fouling characteristics of plate heat exchangers, effect of rib pitch in a two wall divergent channel, semi-empirical analysis in vertical mesoscale tubes, an integrated drying machine, microscale surface wrinkles, brazed plate heat exchangers, numerical analysis in printed circuit heat exchanger. In the area of pool boiling and condensing, non-uniform air flow, PCM applied thermal storage wall system, a new wavy cylindrical shape capsule, and HFC32/HFC152a mixtures on enhanced tubes, were actively studied. In the area of industrial heat exchangers, researches on solar water storage tank, effective design on the inserting part of refrigerator door gasket, impact of different boundary conditions in generating g-function, various construction of SCW type ground heat exchanger and a heat pump for closed cooling water heat recovery were performed. (3) In the field of refrigeration, various studies were carried out in the categories of refrigeration cycle, alternative refrigeration and modelling and controls including energy recoveries from industrial boilers and vehicles, improvement of dehumidification systems, novel defrost systems, fault diagnosis and optimum controls for heat pump systems. It is particularly notable that a substantial number of studies were dedicated for the development of air-conditioning and power recovery systems for electric vehicles in this year. (4) In building mechanical system research fields, seventeen studies were reported for achieving effective design of the mechanical systems, and also for maximizing the energy efficiency of buildings. The topics of the studies included energy performance, HVAC system, ventilation, and renewable energies, piping in the buildings. Proposed designs, performance performance tests using numerical methods and experiments provide useful information and key data which can improve the energy efficiency of the buildings. (5) The field of architectural environment was mostly focused on indoor environment and building energy. The main researches of indoor environment were related to the evaluation of work noise in tunnel construction and the simulation and development of a light-shelf system. The subjects of building energy were worked on the energy saving of office building applied with window blind and phase change material(PCM), a method of existing building energy simulation using energy audit data, the estimation of thermal consumption unit of apartment building and its case studies, dynamic window performance, a writing method of energy consumption report and energy estimation of apartment building using district heating system. The remained studies were related to the improvement of architectural engineering education system for plant engineering industry, estimating cooling and heating degree days for variable base temperature, a prediction method of underground temperature, the comfort control algorithm of car air conditioner, the smoke control performance evaluation of high-rise building, evaluation of thermal energy systems of bio safety laboratory and a development of measuring device of solar heat gain coefficient of fenestration system.

• Clean Technology
• /
• v.22 no.2
• /
• pp.122-131
• /
• 2016

Caesium radioisotopes, ¹³⁴Cs and ¹³⁷Cs which come from the atmospheric nuclear tests and discharges from nuclear power plants, are very important to study artificial radioactivity. In this work, in order to lower the minimum detection activity (MDA) we investigated environmental radioactivity according to the Environment Measurement Laboratory procedure by ¹³⁷Cs and ¹³⁴Cs which is similar to chemical and environmental behaviors of ¹³⁷Cs. The environmental soils in high mountain areas near nuclear power plant were collected, and an Ammonium Molybdophosphate (AMP) precipitation method, which showed high selectivity toward Cs⁺ ions, was applied to chemically extract and concentrate Caesium radioisotopes. Radioactivity was estimated by a gamma-ray spectrometry. In gamma energy spectrum, with an increasing of ⁴⁰K radioactivity, it increased the MDA of ¹³⁴Cs and ¹³⁷Cs. Therefore, if the natural radionuclides were removed from the soil samples, the MDA of Caesium may be reduced, and the contents of ¹³⁷Cs of in the environmental soils can effectively be estimated. In the standard soil sample of Korea Institute of Nuclear Safety, radioactivity of ⁴⁰K was removed more than 84% on average, and the MDA of ¹³⁴Cs was reduced 2 times. The content of ¹³⁷Cs was recovered over 84%. On the other hand, in environmental soils, AMP precipitation method showed removal ratio of ⁴⁰K up to 180 times, which reduced the MDA about 5 times smaller than those of Direct method. ¹³⁷Cs recovery ratio showed from 54.54% to 70.06%. When considering the MDA and recovery ratio, AMP precipitation method is effective for detection of Caesium radioisotopes in low concentration.

• Journal of Preventive Medicine and Public Health
• /
• v.22 no.3 s.27
• /
• pp.389-397
• /
• 1989

To identify the problems in child rearing practice of employed mothers in urban poor area, all of 201 women with children under 6 years old living in Yun San 3 Dong, a poor area of Pusan city, were interviewed with a questionnaire by a trained interviewer from 10th April to 10th May 1989. Among 201 women, 51 women were employed and 150 women were unemployed. Of the employed mothers 78.5% got their jobs because of economical need and 31.4% of them worker for 60-69 hours per week. Their average monthly income was 100,000-190,000 Won in 33.4% and 200,000-290,000 Won in 25.4% Breast milk was fed in 66.0% of the children of unemployed mothers while 49.0 of the children of the employed mothers were breast-fed (p<0.05). The most common reason for not breast feeding was shortage of breast milk among unemployed mothers (58.9%) but that of the employed mothers was their job(63.6%). The basic immunization for children was completed in 70.5% of children of employed mothers as compared with 82.0% of the children of the unemployed mothers were completely immunized (p>0.1). Accident experience rate of children among the employed mothers was 23.5 a and that of the children of the unemployed mothers was 17.3% . The most common cause of acident in children of the unemployed mothers was carelessness while they were playing(34.6%) but in children of the employed mothers it was traffic accident(25.0%) and falling(25.0%). Most of the traffic accidents took place while the children's brother or sister of age under 14 years were baby sitting. When the accident took place 73.1% of the unemployed mothers were just at home, but 58.3% of the employed mothers were out of home for work. In case of the employed mothers, 58.7% of their children were looked after by an adult mainly grandparents, 15.7% by the children's brothers and sisters under 14 years old, and 3.9% of the children were left alone. A majority of the unemployed mothers wanted to get a job if someone could take care of their children. To facilitate the women employment and for the safety and health of the children, good nurseries for working mothers need to be established at a cost they can afford.

• Fire Science and Engineering
• /
• v.18 no.1
• /
• pp.54-66
• /
• 2004

In this article, we are to suggest the hazard-assessing method for the underground pipelines, and find out the pipeline-maintenance schemes of high efficiency in cost. Three kinds of methods are applied in order to refer to the approaching methods of listing the hazards for the underground pipelines: the first is RBI(Risk Based Inspection), which firstly assess the effect of the neighboring population, the dimension, thickness of pipe, and working time. It enables us to estimate quantitatively the risk exposure. The second is the scoring system which is based on the environmental factors of the buried pipelines. Last we quantify the frequency of the releases using the present THOMAS' theory. In this work, as a result of assessing the hazard of it using SPC scheme, the hazard score related to how the gas pipelines erodes indicate the numbers from 30 to 70, which means that the assessing criteria define well the relative hazards of actual pipelines. Therefore. even if one pipeline region is relatively low score, it can have the high frequency of leakage due to its longer length. The acceptable limit of the release frequency of pipeline shows 2.50E-2 to 1.00E-l/yr, from which we must take the appropriate actions to have the consequence to be less than the acceptable region. The prediction of total frequency using regression analysis shows the limit operating time of pipeline is the range of 11 to 13 years, which is well consistent with that of the actual pipeline. Concludingly, the hazard-listing scheme suggested in this research will be very effectively applied to maintaining the underground pipelines.