• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• 제31권4호
• /
• pp.440-450
• /
• 2021

Objectives: This study aims to investigate whether working environment measurement institutions(WEMIs) are conducting safety and health education, risk assessment, and oversight of special management materials, and whether working environment measurement and special medical examinations are being conducted as prescribed in the Occupational Safety and Health Act(OSHA). Methods: In of February 2021, a questionnaire was prepared and distributed to 33 WMEIs registered with the Ministry of Employment and Labor(MoEL) in Busan and Gyeongsangnam-do Province. The responses were collected and then analyzed. Results: The findings show that 5 WEMIs(15%) complied fully with OSHA. Risk assessment was conducted by 13 WMEIs(39%) and safety education by 11 WMEIs(33%). Eighteen WMEIs(55%) conducted working environment measurement, and 29 WMEIs(88%) conducted special medical examinations. The implementation rate of the risk assessment in the health industry(85%) was higher than the one in the special technology industry(11%)(p<0.05). The implementation rate of the special medical examination in the examiners(54%) was not as high as the one in the analysts(91%)(p<0.05). Conclusions: The MoEL needs to check whether basic OSHA requirements are being observed during regular inspections by WEMIs. These findings indicate that it is necessary to prepare a plan to improve the rate of compliance with OSHA regulations.

• The Journal of the Korea Contents Association
• /
• 제17권6호
• /
• pp.661-671
• /
• 2017

The purpose of this study is to compare and analyze the difference between the importance perceived by pre-school teachers and their actual performance in regards to the 7 Guidelines of Safety Education set out by the Ministry of Education, and through the analysis, to identify the items that need priority support and those that need long-term improvement efforts for exemplary safety education for young children. For this, mean average and standard deviation were calculated and paired sample t-test conducted, and IPA(Importance-Performance Analysis) matrix method was performed to analyze the priority and long-term support items and improvement needs. The study results show differences in all areas and all items in the 7 Guidelines of Safety Education by the MoE in the pre-school teachers' perceived importance and actual performance. Areas and items that are identified to be in need of priority support for exemplary safety education in pre-schools; 2 items under 'Violence and Personal Safety' area and I item under 'Substance and Internet Addictions' area. Areas and items that are identified to be in need of long-term improvement efforts are; 6 items under 'First Aid and Emergency Treatment' area, 1 item under 'Violence and Personal Safety' area, 3 items under 'Workplace Safety Culture' area, 3 items under 'Substance and Internet Addictions' area and 1 item under 'Disaster and Safety' area.

• International Journal of Advanced Culture Technology
• /
• 제9권3호
• /
• pp.55-61
• /
• 2021

In this study, a learning environment based on STEAM theory was proposed to support and improve learners' activities and achievements for convergent design education. The learning environment design influence STEAM education with intentional design and schedule coordination, schools can create informal environments that are crucial to STEAM education. The physical surroundings of the learning space should be applied to teaching methods and learning activity, especially for STEAM-based education, physical space conditions should support the learner's design thinking and process. Furthermore, STEAM-based education environment should support a vast array of experiences that allow students to learn the context around ideas and skills. For spaces for learning environment based on STEAM, common design principles should be considered such as technology integration, safety and security, transparency, multipurpose space, and outdoor learning. Therefore, the learning environment based on STEAM needs flexible and mobile, connected, integrated, organized, flipped, and team-focused surroundings to support the learners understand, participate, cooperate, and accomplish the design process.

• Journal of Technologic Dentistry
• /
• 제28권1호
• /
• pp.177-198
• /
• 2006

This study purposed to offer basic data for safety education of the dental laboratory technology after the investigation of how much the students in the dept. of dental laboratory technology are aware of the danger of each instrument, equipment or laboratory procedure that they use during laboratory and how much they demand safety education for this. The objects for this study were 423 students who were in the dept. of dental laboratory technology. In this regard, four colleges which have the dept. of dental laboratory technology were randomly selected to do a questionnaire survey. SPSS 12.0 was used to analyze the collected data. The results were as follows: As for satisfaction with their major, the respondents answered Satisfied (59.1%), Average (35.5%) and Dissatisfied (5.4%). In terms of the production process of a partial denture, they considered casting, polishing the casting body, polishing denture and burn out were most dangerous in order. As for the production process of a full denture, what they regarded as the most dangerous in order was polishing denture, deflasking and wax wash. Regarding the laboratory procedures of porcelain material, casting, trimming casting body, polishing porcelain material and burn out were the most dangerous procedures that they perceived. With regard to materials for use, alcohol, polishing, metal and wire were the most dangerous ones they thought. As for the handling characteristics of each material, small towns showed a higher demand for safety of the handling characteristics of alcohol. In terms of school year and sex, juniors and girls had higher scores in the demand for safety of the handling characteristics of acid. Regarding the handling characteristics of each equipment and instrument, all of small towns, juniors and girls showed the highest demand for safety of the handling characteristics of alcohol lamps. With regard to scores in the demand for safety of other characteristics, all of small towns, juniors and girls had the highest demand for safety of emergency treatment. Concerning the demand for safety education by the completion of safety education, in terms of each material, highest was the demand for safety of acid from the group which completed safety education. In regard to equipments and instruments, when it came to the demand for safety of the handling characteristics of casting machine, the educated group's demand for safety of acid was higher. Regarding other characteristics, the group which was not educated gained higher scores in the demand for safety of emergency treatment. 11. In all areas(materials, machines and others), small towns, girls and juniors showed higher scores in the demand for safety. Based on the above results, it was found that when students conduct the laboratory of dental technology, they would think that many materials, instruments or equipments for use are very dangerous. However, safety education was not fully given to them. Regarding the scores in the damned for safety education, the highest was 4.16 and the lowest was 3.43, which suggests that the scores were generally very high. In this regard, it is necessary to continue delivering a systematic safety education of materials, equipments or instruments used during the laboratory of dental technology. Therefore, through the analysis of each material, instruments or facility used in every laboratory and each process, safety accident types and accident risk factors should be investigated to develop educational materials for this. Moreover, it is required to open safety education as a single course of study or insert safety contents of all materials and machines into the class of dental laboratory instrument or dental materials for the purpose of a systematic and thorough safety education to prevent a safety accident during laboratory.

• Safety and Health at Work
• /
• 제9권4호
• /
• pp.427-433
• /
• 2018

Background: The purpose of this study was to identify the influence of workers' perceived workload, accident experiences, supervisors' safety leadership, and an organization's safety climate on the cognitive and emotional risk perception. Methods: Six hundred and twenty employees in a variety of manufacturing organizations were asked to complete to a questionnaire. Among them, a total of 376 employees provided valid data for analysis. To test the hypothesis, correlation analysis and hierarchical regression analysis were used. Statistical analyses were conducted using IBM SPSS program, version 23. Results: The results indicated that workload and accident experiences have a positive influence and safety leadership and safety climate have a negative influence on the cognitive and emotional risk perception. Workload, safety leadership, and the safety climate influence perceived risk more than accident experience, especially for the emotional risk perception. Conclusion: These results indicated that multilevel factors (organization, group, and individual) play a critical role in predicting individual risk perceptions. Based on these results, therefore, to reduce risk perception related with unsafe behaviors and accidents, organizations need to conduct a variety of safety programs that enhance their safety climate beyond simple safety-related education and training. Simultaneously, it needs to seek ways to promote supervisors' safety leadership behaviors (e.g., site visits, feedback, safety communication, etc.). In addition, it is necessary to adjust work speed and amount and allocate task considering employees' skill and ability to reduce the workload for reducing risk perception.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.357-358
• /
• 2023

Due to recent enhance of safety law and regulations in construction sites, safety inspectors have been more required in construction sites. However, most of them are novice for safety inspection which have not enough experience and skill. Therefore, the novice safety inspector's performance on hazard recognition needs to be improved for effective safety management. The performance of safety inspection is influenced by the inspector's experience and background because the inspection is usually conducted by the inspector's eyes. Therefore, there is a difference in safety inspection performance between novice and experienced safety managers. This study aims to analyze the gap of risk perception between novice and experienced safety managers using quantitative visual data. For this objective, this study conducted eye tracking experiments for novice and experienced group to evaluate cognitive performance of safety risk factors. The results provides the level of safety awareness based on their experience in construction safety. The limitation of this study is a lack of the number of samples used in this study and did not consider the various characteristics of the participants. If these limitations are supplemented in future research, it can be used to develop safety education contents for novice safety managers.

• Human Ecology Research
• /
• 제56권3호
• /
• pp.233-246
• /
• 2018

Korean society is experiencing an increase in multicultural families and single households. The incidence of the MERS, epidemic in 2015, and the subsequent cases of child abuse have been major shocks to Korean society. In addition, there has been a steady increase in household debt, that is in danger of causing a serious crisis in the stability of our society and the family. The current demand for increased accountability in the democratic process is becoming an important topic. There is also an increased awareness of natural disaster preparation due to local earthquakes that have caused concern. At this point, the lifelong education in the home economics education field in Korea is in line with the changes and crises of various societies. Problems related to family life that have happened in the real life of learners stand in the place of the study with preventive character. It should provide the best alternative for family, home, and society, and help to overcome the problems of life. In order for lifelong education to respond to these social changes $vis-{\grave{a}}-vis$ Home Economics Education, it is necessary to develop: 'formation and improvement education of family relationship', 'crisis prevention and management coping ability training', 'safety education', 'learning communication and consensus processes', 'consumer culture education', 'ethics education on environment and resources', 'sustainability education', 'local education of family relationship', 'crisis prevention and management coping ability training', 'safety education', 'learning communication and consensus processes', 'consumer culture education', 'ethics education on environment and resources', 'sustainability education', 'local economic activation education', and other topics of lifelong education topics related to the field of Home Economics Education are required. Consequently, various related programs should be further developed and disseminated.

• Journal of the Korea Institute of Building Construction
• /
• 제14권1호
• /
• pp.29-36
• /
• 2014

To meet changing education needs due to globalization, interdisciplinary convergence, and ICT development, it is necessary for engineering disciplines to provide student-centered education. Not only do teaching methods using ICT reproduce teaching contents in a digital format, but they are also expected to be effective media for constructive student-centered learning whereby learners build knowledge themselves. The aim of this study was to develop a tool for safety education using virtual reality technology. To achieve the objectives, the author defined the requirements and constraints of the tool, and implemented a 3D educational tool in a virtual reality environment. A pilot test with 10 students showed positive results.

• Journal of Food Hygiene and Safety
• /
• 제30권2호
• /
• pp.132-142
• /
• 2015

The purpose of this study was to investigate the perception and information needs about food additives from the parents of elementary school children, and to develop a smartphone application (App) providing information about food additives, and finally to assess its educational effects. A survey was conducted in April 2013 by using a self-administered questionnaire, and total 358 responses were collected from the parents living in Seoul and Gyeonggi province. While purchasing processed foods, parents considered safety (40.5%) as the most important factor, and first checking item except production and expiration dates was origin labelling (35.4%), and chose foods with less food additives (63.1%). Parents recognized food additives as the most dangerous (42.7%), and 75.1% responded the level of danger as 'very dangerous'. However, 82.4% of parents didn't have experiences to get educations about food additives. Based on their information needs including the safety, legal standards and the foods containing food additives. a smartphone App designated as 'Catch up Food Additives' consisting of the definition, safety, food labelling guideline, management, animation about food additives was developed. When the App was exposed to the parents (n = 27), their negative perceptions on food additives were improved significantly. These results showed that providing information and education about food additives using smartphone App was very fast and effective for the promotion of risk communication on food additives with the parents.

• Journal of Christian Education in Korea
• /
• 제72권
• /
• pp.7-24
• /
• 2022

Christian education for the world after COVID-19 needs to use rapid changes in the surrounding situation as an opportunity to overcome a new crisis so that the church can achieve its educational mission. If the biggest dilemma in the post-Corona era is that there is no authoritative educational prescription anywhere, the most reasonable option for church education in this situation is to emphasize and cultivate learners' ability to flexibly cope with rules that are completely different than before COVID-19. As a natural result of the crisis, Christian education needs to be more interested in the trend of social change in the pandemic era(glocalization, digital transformation, economic inequality, educational environment change, church crisis) and actively reflect its contents in education. In addition, while operating a mobile(or online) church school that combines offline and online, there is an urgent need for an innovative transition to a core church school where certain church schools and churches cooperate with each other, a church school that guarantees a safe learning space, and an ecological church school that is interested in education dealing with climate change and ecology.