• Journal of Environmental Health Sciences
• /
• v.30 no.5 s.81
• /
• pp.432-439
• /
• 2004

Korean certification regulation for particulate filtering respirators requires inward leakage (IL) test as European Standards (EN) and the standard levels of regulation are the same as those of EN. This study was conducted to evaluate particulate filtering respirators being commercially used in the market by using IL and assess the characteristics of IL. The study began with discussing the concept of IL, comparison of IL with fit test, and IL measurement method. Three brands of half masks and 10 brands of filtering facepieces (two top class, four 1st class and four 2nd class), total 13 brands respirators, and 10 test panels (subjects) who were classified in 9 facial grids in accordance with face length and lip length, were selected for IL test. IL tests were conducted in the laboratory of 3M Innovation Center which was established by EN standard. As expected ILs of half masks were lower than those of filtering facepiece mask. ILs of half masks and some filtering facepieces were significantly different in manufacturers. ILs of 1st class filtering facepieces were found to be much more than those of 2nd class and thus the result would cause wearers to get confused to select a mask. Four of six brands being no compliance with standards were thought that they should be tested again for certification because of a lot of differences from standards. There were no significant differences among ILs of five exercises. In 6 out of 13 brands lognormal distribution of ILs may be a better fit distribution and in 7 brands both lognormal and normal distributions were rejected. The result indicates that geometric mean may be better than arithmetic mean to establish standard.

• Korean Journal of Environmental Agriculture
• /
• v.41 no.3
• /
• pp.153-157
• /
• 2022

BACKGROUND: The residue dissipation pattern of pesticides for agricultural products during the pre-harvest period after the final application is important to prevent the maximum residue limit (MRL) violations in domestic and export markets. The MRL violations of carbendazim are observed more often in chamnamul by pesticide residue management surveys by the Ministry of Food and Drug Safety. The residue level at the pre-harvest interval (PHI) and the residue dissipation constant from the critical good agricultural practice (cGAP) trials could be estimated to meet the MRL and pose a health risk to consumers. METHODS AND RESULTS: Chamnamuls were harvested at 0, 1, 3, 5, 7, 10, and 14 days after application of carbendazim in accordance with critical GAP. The residue analysis in chamnanul was performed by HPLC-DAD with the C₁₈ column. The limit of quantitation of carbendazim was 0.04 mg/kg, and the recoveries were 74.4 - 95.8% at the two spiked levels (LOQ and 10LOQ) of carbendazim. The dissipation rates in chamnamul were calculated from the residues at the sampling days by statistical method at a 95% confidence level. The biological half-lives of residual carbendazim in the field trials 1 and 2 were 4.9 and 4.4 days, respectively. CONCLUSION(S): In this dissipation study, the residue concentrations at the recommended PHI were higher than the established MRL in Korea. Therefore, the MRL is proposed based on the residue data sets from the trials conducted at the same cGAP and the dietary exposure assessment.

• Korean Journal of Environmental Agriculture
• /
• v.42 no.2
• /
• pp.131-138
• /
• 2023

The biological half-life and dissipation rate of azoxystrobin in crown daisy were calculated to establish the pre-harvest residue limits (PHRLs). The pesticide residues were calculated after washing with five different processes to propose an effective process in the household and conducted a risk assessment to confirm dietary safety. Azoxystrobin was sprayed according to the critical good agricultural practices (cGAP) in two different field trials, and the samples were harvested 7 times. The limit of quantitation was 0.02 mg/kg, and the mean recoveries of azoxystrobin were within the range of 70~120% with below 20% coefficient variation at the concentration of 0.02 and 0.2 mg/kg . The biological half-lives were 7.4 and 4.7 days, and the dissipation rate constants were 0.0872 and 0.1217 in fields 1 and 2, respectively. The average removal rates were 58.13~78.13% by the different washing processes, and there were significant differences between the washing processes (one-way ANOVA analysis and post-hoc Duncan test, p-value<0.05). The residues of azoxystrobin in crown daisy were safe levels from farm to fork after application with the critical good agricultural practice (cGAP) registered in Korea.

• Journal of agricultural medicine and community health
• /
• v.31 no.2
• /
• pp.165-176
• /
• 2006

Objectives: This study aimed to evaluate job satisfaction and its related factors among radiological technologists. Methods: The subjects were 302 persons in various hospitals and the data were collected from 22 May to 17 July, 2005 using a structured questionnaire. It was composed of socio-demographic characteristics, job-related factors, and job satisfaction with the duty inner factors, the duty outside factors, and the organizational factors. Results: Men were more satisfied than women in their employment(p<0.05). Job satisfaction level of university hospital workers were higher than the general hospital, the hospital, and medical clinics. Job satisfaction level of the general radiological technologists showed lower than the chief radiological technologists (p<0.05). In monthly average grant, the more gained, the higher the satisfaction level(p<0.05). By multiple linear regression analysis, the related factors of job satisfaction level were medical field and duty position (p<0.05). Conclusions: The research shows that job satisfactions levels of the radiological technologists are determined by the health and safety of the work environment. Therefore more improvements must be made for radiological technologists to be more satisfied in their jobs.

• Journal of the Korea Convergence Society
• /
• v.3 no.3
• /
• pp.21-27
• /
• 2012

The survey was carried out with a random sample of adults living in Busan and Gyeongnam. The collected material is used by the SPSS version 12.0. The frequency, percentage, examination were applied for studying. We separated the group of safety, general management, real hair management according to characteristic about scarp and hair problems. There is highly understanding about the hair problem that if someone has really sensitive scalp or who has dandruff or who has thin hair or who has someone has hair losing problem in their family. Usually, the group has highly understanding of hair problem, they consult about their hair and scalp with expert. They have a really good attention about the mass media(TV, Internet, Newspaper, Magazine) for scalp and hair health. They reduce using hair products. They always read hair product brochure first and use it. They don't eat fast food frequently. The survey has shown high levels of article. Now the research showed us that s have a strict connection between self-recognition and scalp treatments. That means someone has understanding hair problem then start treatment first.

• Journal of the Korean Society of Food Culture
• /
• v.21 no.1
• /
• pp.71-75
• /
• 2006

This study was conducted to investigate the eliminatory effect of health drink containing Hovenia dulcis Thunb extract on ethanol-induced hangover in rats. Male Sprague-Dawley rats weighing $200{\pm}10\;g$ were given health drink (10 mL/kg) or other company product(10 mL/kg) 30 min before or after 40% ethanol (5 g/kg body weight) ingestion. To study the effect of health drink on blood ethanol concentration, blood was taken from caudal artery at 1, 3, 5 hr and the animal were sacrificed 24 hr after ethanol ingestion. From 1 to 5 hr, health drink pre- or postdosing significantly decreased the ethanol levels in the blood. The acetaldehyde concentration showed decrement in health drink group and other company product group. The activities of ethanol, alcohol dehydrogenase and aldehyde dehydrogenase measured at postdosing, were also not altered by the administration of health drink. Alanine aminotransferase and aspartate aminotransferase activities showed unaltered resulted in all experimental groups compared with the normal group. These results suggest that oral intake of health drink containing Hovenia dulcis Thunb is effective on elimination of ethanol-induced hangover.

• Journal of odor and indoor environment
• /
• v.17 no.4
• /
• pp.355-361
• /
• 2018

Mold grows more easily when humidity is higher in indoor spaces, and as such is found more often on wetted areas in housing such as walls, toilets, kitchens, and poorly managed spaces. However, there have been few studies that have specifically assessed the level of mold in the indoor spaces of water-damaged housing in the Republic of Korea. We investigated the levels of airborne mold according to the characteristics of water damage types and explored the correlation between the distribution of mold genera and the characteristics of households. Samplings were performed from January 2016 to June 2018 in 97 housing units with water leakage or condensation, or a history of flooding, and in 61 general housing units in the metropolitan and Busan area, respectively. Airborne mold was collected on MEA (Malt extract agar) at flow rate of 100 L/min for 1 min. After collection, the samples were incubated at $25^{\circ}C$ for 120 hours. The cultured samples were counted and corrected using a positive hole conversion table. The samples were then analyzed by single colony culture, DNA extraction, gene amplification, and sequencing. By type of housing, concentrations of airborne mold were highest in flooded housing, followed by water-leaked or highly condensed housings, and then general housing. In more than 50% of water-damaged housing, the level of airborne mold exceeded the guideline of Korea's Ministry of Environment ($500CFU/m^3$). Of particular concern was the fact that the I/O ratio of water-damaged housing was greater than 1, which could indicate that mold damage may occur indoors. The distribution patterns of the fungal species were as follows: Penicillium spp., Cladosporium spp. (14%), Aspergillus spp. (13%) and Alternaria spp. (3%), but significant differences of their levels in indoor spaces were not found. Our findings indicate that high levels of mold damage were found in housing with water damage, and Aspergillus flavus and Penicillium brevicompactum were more dominant in housing with high water activity. Comprehensive management of flooded or water-damaged housing is necessary to reduce fungal exposure.

• Journal of Environmental Health Sciences
• /
• v.40 no.3
• /
• pp.187-203
• /
• 2014

Objectives: As the demand to deal with pathogens in domestic research institutions has expanded and biological accidents have increased, the need for systematic biosafety management in infectious disease laboratories has grown. According to international standards, risk assessment (RA) is required for biosafety management. However, RA criteria have not been clearly established in Korea, so to this end I have attempted to determine RA criteria meeting international levels Methods: In order to provide RA criteria for application, I analyzed the RA criteria in use in the U.S., Europe and at international organizations. In order to ensure the public nature of the RA criteria, I constructed the research model through modified management consulting methodology reflecting the model of Radnor and O'Mahoney. Results: According to the results of the study, existing laboratory biosafety regulations were comparable to domestic laboratory safety laws. Existing laboratory biosafety standards that are designed around risk factors were found to be insufficient. An RA case to be carried out in infectious disease laboratories at the National Institute of Health of KCDC was identified. Conclusion: To establish a systematic risk management system meeting international standards, it was necessary first to harmonize the systems of national and international standards. In addition, in order to provide specific biosafety management on-site, I recognized a need for methodology and planning strategies to discover biosafety management so that it can be carried out as required through the RA of individual laboratories.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.9 no.1
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.4-7
• /
• 2009

Agricultural soils contaminated by cadmium (Cd) are common problems in Asia due to rapid industrial development, so the risks of Cd exposure from food crops consumption are concerned by public and authorities. The latest data on Cd concentration in plant-based food and the dietary intakes of Cd around the world are presented in this review. In general, Cd concentrations in major plant-based commodities seldom exceed 0.05 mg/kg fresh weight and decline in the order as: cereals > pulses > vegetables > roots and tubers > fruits in Far Eastern region. In Middle Eastern and European regions, the order is vegetables > cereals > roots and tubers > pulses > fruits. Rice has the highest Cd levels among cereals in Asian countries, but in Middle Eastern and European region the highest level of Cd occurred in leaf vegetables. The dietary intakes of Cd from plant-based commodities around the world declined in the order as: cereals > vegetables > roots and tubers > fruits > pulses. Rice is the largest contributor to total dietary Cd intake (58%) in the Far Eastern region and contributed 36% of Provisional Tolerable Daily Intake (PTDI). For high foodstuffs consumers, intake of Cd from all diets may exceed PTWI, especially for high rice consumers in Asian countries. The World Health Organization (WHO) conducted impact assessment of different maximum levels (MLs) of Cd and demonstrated that each of the four possible MLs for rice had little impact on dietary Cd intake. Since many Cd-contaminated soils in Asian countries still producing crops due to the growing population, the cost-effective techniques for reducing Cd contents in crops especially rice grain are absolutely required.