• Journal of the Korea Institute of Building Construction
• /
• v.21 no.2
• /
• pp.157-163
• /
• 2021

The accident rate is obtained by dividing the number of accidents by the number of regular workers. In the case off construction work, however, the accident rates are not accurately figured out, because they use the approximate number of regular workers, which is estimated based on the amount of construction work and the labor ratio. In addition, the current accident rate estimation method does not reflect the characteristics of construction types, such as building, civil, plant, etc. This study is conducted with the aim of presenting a supplementary method of accident rate assessment that incorporates the characteristics of type of construction. For the purpose of this, correlation and regression analysis are executed to verify the relationships between number of accidents and the amount of construction contract, and several equations are derived which shows the relationship between the number of accidents by accident types and amount of constract by construction types. The result shows that the non-residential work amount and the number of accidents showed a proportional relationship, while the civil work amount and the number of accidents showed an inversely proportional relationship. The results of this research are expected to calibrate the construction accident rates and to be used as an auxiliary indicator to determine the trend of annual accident rates by comparing the values with usual years.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.04a
• /
• pp.216-217
• /
• 2022

After the financial crisis, the spread of indirect employment, which is an outsourcing method, is gradually becoming common in our society, and the risk of harm is relatively high or the proportion of simple jobs is high. Simple workers have a higher proportion of non-manufacturing industries such as the service industry, and production workers are intensively used in the manufacturing industry. In Article 63 of the Occupational Safety and Health Act, contractors must take necessary safety and health measures. In addition, due to the expansion of the scope of contracts under the Occupational Safety and Health Act, it is necessary to review the appropriateness of industrial accident prevention measures and implementation standards.

• Journal of the Korean Society of Safety
• /
• v.26 no.4
• /
• pp.120-126
• /
• 2011

Under the current law or system, the range of traffic accident on the crosswalk does not reflect the characteristics of traffic accident and the pedestrian's walking pattern. Thus, this study conducted a video recording survey on the 250 spots which are high to traffic accident rate of pedestrian-vehicle to reset the range of traffic accident on or near the crosswalk considering the characteristics of traffic accident and the pedestrian's walking pattern. Based on the collected data through a video recording survey, this study analyzed the pattern of pedestrians and extracted the variables influenced in the pedestrian's walking pattern. After conducting the regression analysis, this study made the model of measuring the range of traffic accident on the crosswalk. Through all processes these, this study reset the range of traffic accident on the crosswalk which could minimize the disadvantages of pedestrian when they have an accident on the crosswalk and ensure the right of way of pedestrian.

• Journal of the Korean Society of Safety
• /
• v.28 no.6
• /
• pp.1-5
• /
• 2013

Notorious press machine bothers employers by causing so many industrial accidents which are mostly of caught-in or between type. In 2008, press machines caused 1665 cases of such type of accidents, which reached about 11% of all those. Even though various approaches has been adopted to prevent those press machine accidents, up to now, no one was found to be satisfactory. In this study, two kinds of companies, accident-occurred and accident-free by press machine, were surveyed to find out positive and negative factors for accidents prevention. 400 companies which experienced accidents in 2008 and 200 companies which did not experience accident at all during the same period were selected for this survey. Most of these companies are small companies that employ less than 50 employees. Even though small companies are exempted from legal obligations to have a safety management system for accident prevention, we surveyed about safety management systems of those companies because of its crucial importance for accident prevention including whether they appointed safety managers and various supervisors. Awareness and efforts for safety of employers and employees were also measured. Results were analysed by the method of cross tabulation analysis. Main findings of this study are as follows. Most accident-occurred companies did not appoint any safety manager or supervisor. While it is recommended that the workplace of high accident rate have a safety manager. In addition, as less employers' effort for safety was made in accident-occurred companies in order to prevent accidents during press processing, the author proposes an amendment to the relevant law. Finally, the most referred reason for the negligence of hazard is the cumbersomeness in installing safeguards.

• Korea Journal of Hospital Management
• /
• v.26 no.1
• /
• pp.17-25
• /
• 2021

This study aimed to analysis factors related to in-hospital death of injured patients by patient safety accident. A total of 1,529 inpatients were selected from Korea Centers for Disease Control and Prevention database(2013-2017). Frequency, Fisher's exact test, t-test, ANOVA, logistic regression analyses by using STATA 12.0 were performed. Analysis results show that the mortality rate was lower for female than male but the mortality rate was higher for the older age, the higher the CCI, head (or neck), multiple, systemic damage sites, internal and others, metropolitan cities based on Seoul and 300-499 based on the bed size of 100-299. Based on these findings, the possibility of using the in-depth investigation of discharge damage from the Korea Centers for Disease Control and Prevention as a data source for the patient safety survey conducted to understand the actual status of patient safety accident types, frequency, and trends should be reviewed. Also, it is necessary to prevent injury and minimize death by identifying factors that affect death after injury by patient safety accident.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.151-159
• /
• 2017

This study deals with characteristics and risk of a PM based on user survey result, road driving test and data analysis of PM accident. Text mining method is applied to extract PM accident data from Big Data, which are claim data of private insurance company. Road driving test and survey on safety, convenience, noise, overtake ability, steering ability, and climbing ability of PM are performed to evaluate user's safety and convenience considering domestic road condition. As the result of claim data analysis, annual average increase rate of PM accident is 47.4% and average compensation of personal mobility is higher than that of bicycle by maximum 1.5 times. 79.8% of PM accident is self-caused accident due to unskilled driving and age-specific diagnosis rate of driver over 60 is higher than that of under 60. Diagnosis rate of over 60 at lower limb, foot, rib and spine is especially higher than that of under 60. As the result of road driving test and user survey, satisfaction level on safety and convenience of PM is evaluated as close to that of bicycle and satisfaction level of PM is increased after boarding. Overtake ability, steering ability, and climbing ability of PM are evaluated as same or better than that of bicycle but warning equipment to pedestrian or bike such as horn is required because noise level of PM during driving is too low. Finally, user survey result shows that bicycle road is suitable for PM and safety standard, advance-education and insurance are required for PM. It is suggested that drivers' license for PM can be replaced by advance-education. Results of this study can be used to prepare safety measures and legal basis for PM operation.

• Journal of the Korean Society of Safety
• /
• v.32 no.6
• /
• pp.143-149
• /
• 2017

According to traffic accidents statistics, the number of fatalities, injuries and the rate of increase of traffic accidents have been decreasing over last 5-years. The fatality rate is 1.9 for total accidents but the fatality rate for single vehicle accidents shows a 7.9, which is 4 times greater than the average for all accidents. Single vehicle accidents, usually occur as a vehicle impacts a fixed objects on the roadside as the vehicle runs-off from the road. However, few researches have been conducted considering the accident severity of single vehicle accidents which impact to the fixed objects on the road. The single vehicle accident is directly related to the composition of road cross section, (since it is the required the minimum width of a road for all run-off-the-road vehicles to recover or come to a safe stop). Therefore, this study analyzes the influence of road cross section on traffic accidents to find out the severity of single vehicle accident. To analyze the road elements which are related to the accident severity, the Ordered Probit Model was used. As variables, the element of road cross section such as the radius(m), vertical curve(%), cross sectional grade(%), road width(m). number of climbing lane, median, and curb, were used (as was the 3-years of accidents data). This study found out that cross slope(%), road width(m), and the number of climbing lane are related to the severity of accident. The result of this study could be expected to improve the road safety and to be used as the base data for further road safety research.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.50-51
• /
• 2017

The safety accident of construction industries occur variously in other industries, including other industries, resulting in significant losses of human and material losses. In particular, General worker represents the highest safety accident rate each year, and the various types of accidents are the ones that show the greatest interest in the field, which is the most interesting job in the field. This study aims to identify trends in safety hazards and to analyze the accident severity for major types and influence factors.

• The Journal of Korean Society for School & Community Health Education
• /
• v.14 no.1
• /
• pp.61-70
• /
• 2013

Objectives: The purpose of this study analyzes the characteristics of safety education in schools, experience of accidents, and safety awareness level of elementary school students. It also presents realistic guidelines for safety education, which can effectively lead to the safety behavior of students. Methods: We carried out questionnaire survey by convenient sampling method to 6th grade students of 3 elementary schools in Gyeonggi-do area that can understand the questionnaire and express their own opinion for safety awareness from February 15, 2013 to February 1, 2013. We used a self-administered questionnaire and analyzed 266 questionnaires except dishonestly answered 34 questionnaires. Results: 1. For accident occurrence by gender, male students was higher than female students. Male students was also higher than female students among students having an accident(${\chi}^2$=5.142, p=0.029). There was statistical significance in accident occurrence by how they go to school. Students going to school on foot have higher accident rate(${\chi}^2$=11.447, p=0.010). 2. In terms of safety awareness level, students having no accident was higher than students having an accident(F=3.828, p=0.005) and students usually keeping safety rules have higher safety awareness(F=14.285, p=0.000). 3. When parents give safety education to their children as often as possible, the safety awareness level of students was high(F=5.257, p=.006). 4. Students having an accident have no safety education experience than students having no accident(p<0.05). They have never had safety education from a health teacher. There was statistical significance(p<0.01). Conclusions: Accordingly, we need to make students have safety attitude to prevent safety accidents. To achieve it, safety awareness has to be inspired. Systematic and various education programs that can give connected education with local community network to the students and parents is required.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.54 no.1
• /
• pp.65-72
• /
• 2018

This study analyzed the condition of marine accident and disaster rate of crew of Korean fishing vessels by vessel type, and checked the Australian safety management system and relevant regulation in Korea to suggest measures to build coastal/offshore fishing vessel safety management system in Korean coastal/offshore fishery. As a result, the power and production amount of Korean coastal/offshore fishing vessel is consistently decreasing while marine accident is increasing. Disaster rate of crew was higher than land industry, especially, the disaster rate of coastal/offshore fishing vessel was very high (100.0‰). Australia applies safety management system differed by vessel type and operation waters which fully considers the characteristics of pertinent vessel. The average accident rate of fishing vessels with gross tonnage over 20 tons among the Korean coastal/offshore fishing vessel was 13.6%, which was significantly higher than fishing vessels with gross tonnage below 20 tons (1.4%). Such result indicates it is urgent to implement safety management system to fishing vessel with gross tonnage over 20 tons and introduce fishing vessel safety supervisor. Establishing safety management system of coastal/offshore fishing vessel will contribute to consistent industrial development by achieving the general goal of reducing marine accident and spreading safety culture.