• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1095-1104
• /
• 2013

The number of vehicles registered in Korea is rapidly increasing and will reach 18.26 million as of June 2011. The rapid increase of large-size passenger cars and RVs among this number is causing damage to other vehicles when parked in currently installed parking lots, increased civil complaints from the damage, and inconveniences to people trying to pass through parking lots as well. In particular, the car-stoppers indiscriminately installed at the parking lots are also causing accidents and adding to parking problems, causing economic losses. Accordingly, there should be new regulations for the amount of parking space per vehicle and for locations to install the car-stoppers. The research has first reviewed the distribution ratio of vehicle models from home and abroad for the width and length of the vehicles by each model, parking space per vehicle where the car-stoppers are installed and examples of changes in distribution ratio. In addition, the amount of parking space per vehicle was calculated with consideration for various specifications by each car model. As a result, margin width of full sized car is decreased by 18~21mm on the existing width. This is judged decreases accident of parking lot, because length of the front of car is not deviate parking Space Section. In conclusion, presented improvement ideas for parking plans with enhanced convenience and safety from the aspect of the drivers. Parking lot relevant businesses will also be maximized in terms of cost and efficiency when the criteria for the structure of parking lots and their installation is established and the improved parking plan is applied in the future.

• Journal of Navigation and Port Research
• /
• v.29 no.1 s.97
• /
• pp.9-15
• /
• 2005

To design ship channel is one of important factors for planning and developing a port. In most case, the core factors for designing ship channel are the layout and width of channel provided the net underkeel clearance is secured to be safe enough to pass. In this study, Variable Bumper Area(VBA) model is applied to design and assess ship channel. This model reflects ship's particular, ship domain theory, ship speed and mariner's ship handling skill and experience, especially external forces which cause leeway, set and drift and the change of ship maneuvering characteristics. A real time, full mission shiphandling simulator is used to analyze ship dynamic data according to mariner's ship control, external forces, ete. This model defines Domain degree and Domain-index for assessing the efficiency and safety of the channel. The proposed model is applied to Ulsan new port plan which has a channel width of 1.5 times the length of the largest vessel, a radius of 5 times the length of the largest vessel in a curve of 57 degree centerline angle and SBM facility adjacent to the lateral edge of channel. The result of this study shows that the width of the channel and radius of channel curve are suitable for the target ship but the difficulty of ship handling is caused by the large course change and SBM located in the vicinity of channel.

• Journal of Korea Water Resources Association
• /
• v.46 no.1
• /
• pp.13-24
• /
• 2013

The main objective of this study was to develop a new regional frequency analysis model based on hierarchical Bayesian model that allows us to better estimate and quantify model parameters as well as their associated uncertainties. A Monte-carlo experiment procedure has been set up to verify the proposed regional frequency analysis. It was found that the proposed hierarchical Bayesian model based regional frequency analysis outperformed the existing L-moment based regional frequency analysis in terms of reducing biases associated with the model parameters. Especially, the bias is remarkably decreased with increasing return period. The proposed model was applied to six weather stations in Jeollabuk-do, and compared with the existing L-moment approach. This study also provided shrinkage process of the model parameters that is a typical behavior in hierarchical Bayes models. The results of case study show that the proposed model has the potential to obtain reliable estimates of the parameters and quantitatively provide their uncertainties.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.9
• /
• pp.64-72
• /
• 2020

DELAY M9 is an ammunition used in combination with the fuse M904 and M905 of aviation drop-off ammunitions. Due to the properties of the ammunition, the performance or safety of the ammunition cannot be verified until it is used, because of its one-time function, no reproduction and is finally destroyed at the same time. Long-term storage of ammunition in use by the army is inevitable due to its operational characteristics, and a test evaluation is required to maintain and verify the performance of stored ammunition for immediate use in case of emergency. This paper estimates the reliability and shelf life of the DELAY M9 ammunition by using the test data obtained through ASRP performed from the past to the present. The result of the performance evaluation test for the currently stored DELAY M9 ammunition is analyzed, and the reliability and shelf-life of the stored ammunition are assessed by examining the number of defects according to the storage time and production year. This research result can be used to manage the stored ammunition, such as ASRP planning and evaluation test, result analysis and munition state decision.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.13-30
• /
• 2013

Increase of pore fluid pressure resulting from injection of $CO_2$ may reactivate pre-existing faults, and the induced seismic activities can raise the safety issues such as seal integrity, restoration of storage capacity, and, in the worst case, removal of previously injected $CO_2$. Thus, fault stability and potential for $CO_2$ leakage need to be assessed at the stage of site selection and planning of injection pressure, based on the results of large-scale site investigations and numerical modeling for various scenarios. In this report, studies on the assessment of fault stability during injection of $CO_2$ were reviewed. The seismic activities associated with an artificial injection of fluids or a release of naturally trapped high-pressure fluids were first examined, and then site investigation methods for the magnitude and orientation of in situ stresses, the distribution and change of pore fluid pressure, and the location of faults were generally summarized. Recent research cases on possibility estimation of fault reactivation, prediction of seismic magnitude, and modeling of $CO_2$ leakage through a reactivated fault were presented.

• Journal of Korean Society of Steel Construction
• /
• v.20 no.6
• /
• pp.723-730
• /
• 2008

Due to the higher ratio of live load to total loads of railway bridges, the accumulated damage by cyclic fatigue is significant. Moreover, it is highly possible that the initiated crack grows faster than that of highway bridges. Therefore, it is strongly needed to assess the safety for the accumulated damage analytically. The initiation and growth of fatigue-crack are related with the stress range, number of cycles, and the stiffness of the structural system. The stiffness of the structural system includes uncertainties of the planning, design, construction and maintenance, which varies as time goes. In this study, the authors developed the design and risk assessment techniques based on the reliability theories considering the uncertainties in load and resistance. For the probabilistic risk assessment of crack growth and the remaining life of the structures by the cyclic load of railway and subway bridges, response surface method (RSM) combined with first order second moment method were used. For composing limit state function, the stress range, stress intensity factor and the remaining life were selected as input important random variables to the RSM program. The probabilities of failure and the reliability indices of fatigue life for the considered specimen under cyclic loads were evaluated and discussed.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.397-403
• /
• 2020

This survey was willing to suggest the basic data required for strategic planning to improve the recognition rate on radiation by investigating the difference between the college students who major in radiology and who don't about using radiation. As the results of questionnaire survey on 'knowledge, degree of self-consciousness, danger, convenience and management' targeting 441 students who belonged to D college, 75% of them answered that radiation exists in their daily lives and 54% of them answered they did not know about radiation well. It showed that radiation is dangerous no matter how much the amount is (56%) and it is not dangerous if it is managed well (81%). They answered that they enjoy the convenience of radiation (82%) and the use for medical purpose took the highest percentage among them (58%). It showed that it is important to manage the radiation and should be controlled by the government in institutional way than the individual (64%). The negative answer to the question of 'do you trust the government?' was dominant (75% below average). As the results of this survey, it was recognized that both of them who major in radiology or not were aware of positive aspect of radiation (especially medical technology field) well and the improving the perception of radiation led by the government and definite restriction on its safety should be preceded for safe use.

• Journal of Preventive Medicine and Public Health
• /
• v.1 no.1
• /
• pp.1-8
• /
• 1968

This paper describes the incidence of transport accident for the period, 1955-1965. Transport accidents were classified into three categories, viz. railway(WHO Classification of Diseases, E-802), watercraft (E 550-E 858) and motor vehicle accidents(E810-E835, E840-E841, E844-E845). Crude data on the subject were collected from the various souces of Government Statistical Books including Statistical Year Books edited by the Central Office of Economic Planning Board, Annual Police Reports by the Ministry of Home Affairs, and the national and local associations for road traffic safety. From the data incidence and mortality rates by year, month and local province were computed and other variables relevant to the epidemiology of accidents were observed. The following summary could be drawn: 1. Death rates due to transport accidents per 100,000 population were 12.3 for 1955 and 9.7 for 1965. The incidence of injury due to the same cause were 34.0 for 1955 and 35.9 for 1965. 2. Death rates by transportation vehicle showed 9.0 due to motor vehicle accidents, 1.7 due to water-crafts, and 1.6 due to railway trains for 1955. In 1965 death rates were 6.0 due to motor vehicles, 1.2 to water-crafts and 2.4 to railway. 3. Seasonal distribution of transport accidents revealed that car accidents occur more frequently in spring and fall fall seasons while ship accidents do in winter and train accidents more in summer. 4. Both car and ship accidents slightly decreased during the past decade, 1955-1965, whereas the accidents of railway trains showed a tendency of increase. 5. Although the survey on railway accidents excluded the injuries of passengers or railway employees corresponding to WHO classification of diseases, E 801, due to inaccuracy of data, it is roughly estimated that the same number of casualities as the incidence among pedestrians or any other than passengers or employees assumed to be at work(E 802).

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• Journal of Korean Society of Transportation
• /
• v.21 no.2
• /
• pp.71-82
• /
• 2003

The shortest path problems(SPP) are critical issues in the military logistics such as the simulation of the War-Game. However, the existing SPP has two major drawbacks, one is its accuracy of solution and the other is for only one solution with focused on just link cost in the military transportation planning models. In addition, very few previous studies have been examined for the multi-shortest path problems without considering link capacity reflecting the military characteristics. In order to overcome these drawbacks, it is necessary to apply the multi-shortest paths algorithm reflecting un-expected military incidents. This study examines the multi-shortest paths in the real networks using Shier algorithm. The network contains both military link capacity and time-based cost. Also, the modes are defined as a platoon(group) rather than unit which is used in most of previous studies in the military logistics. To verify the algorithm applied in this study. the comparative analysis was performed with various sizes and routes of network which compares with Dijkstra algorithm. The major findings of this study are as follows ; 1) Regarding the unique characteristics of the military transportation plan, Shier algorithm, which is applied to this study, is more realistic than Dijkstra algorithm. Also, the time based concept is more applicable than the distance based model in the military logistics. 2) Based on the results from the various simulations of this study the capacity-constraint sections appeared in each scenarios. As a consequence, the alternatives are necessary such as measures for vulnerable area, improvement of vehicle(mode), and reflection of separated-marching column in the military manuals. Finally. the limits and future research directions are discussed : 1) It is very hard to compare the results found in this study. which is used in the real network and the previous studies which is used in arbitrary network. 2) In order to reflect the real military situations such as heavy tanks and heavy equipment vehicles. the other constraints such as the safety load of bridges and/or the height of tunnels should be considered for the future studies.