• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.4
• /
• pp.357-365
• /
• 2011

The variation of the dissolved inorganic nutrients were investigated four times per year in the costal area of Gunsan, Yellow Sea from 2001 to 2010. Water samples were collected at 10 stations and phsico-chemical parameters were analyzed including water temperature, salinity, suspended solids, dissolved oxygen, chemical oxygen demand, chlorophyll a and dissolved inorganic nutrients. The average of dissolved inorganic nitrogen(DIN) for ten years at Gunsan area showed similar concentration between surface and bottom. The average of DIN at surface was 0.421mg/L (0.198~0.846mg/L) and bottom was 0.344mg/L(0.148~0.717mg/L). The highest value of annual average of DIN at surface was 0.846mg/L in 2002 and the lowest value was 0.198mg/L in 2010. The percentage of ammonia, nitrite and nitrate for the average DIN of 10 years showed 27%, 3% and 70% which showed most of DIN was nitrate. Dissolved inorganic phosphate(DIP) for ten years at Gunsan area showed similar concentration between surface and bottom and DIP was decreasing from 2003 to 2010. The average of DIP of 10 years was 0.024mg/L and annual average 0.021mg/L in 2008, 0.007mg/L in 2009 and 0.008mg/L in 2010 which showed decreasing pattern from 2007 to 2010. The average of DIN/DIP ratio from 2002 to 2010 was 6.0(3.2~10.1) at surface and 4.6(2.6~7.0) at bottom. The average value of dissolved inorganic silicate from 2004 to 2010 showed 0.372mg/L at surface layer and 0.352mg/L at bottom layer and was on decreased from 2006 to 2010. The Spearman's correlation analysis was carried out to knowrelation among the salinity and dissolved inorganic nutrients at the surface and bottom layer. The correlation factor of DIN was -0.72, DIP was -0.46 and dissolved inorganic silicate was -0.63 at surface layer and DIN was -0.70, DIP was -0.44 and dissolved inorganic silicate was -0.57 at bottom layer. The dissolved inorganic nutrients at the nearshore of Gunsan was affected from the freshwater discharge of Geum river. Especially, a lot of DIN flowed into the nearshore of Gunsan from Guem river. The concentration of dissolved inorganic nutrients at Gunsan showed high at station 1, 2 and 3 and there was a little concentration differences according to the cruise time. The concentration of dissolved inorganic nutrients showed high value at the station 1, 2, 3 which exist nearshore of Gunsan city and it means these stations mainly affected by Geum river and Gunsan city. The annual average of dissolved inorganic nutrients showed gradually decreased from 2003 to 2010 and we need more research on this conditions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.17 no.3
• /
• pp.188-201
• /
• 2005

This is the first part of a two-part paper which describes comparison of reliability design methods by application to Donghae Harbor Breakwaters. This paper, Part 1, is restricted to stability of armor blocks, while Part 2 deals with sliding of caissons. Reliability design methods have been developed fur breakwater designs since the mid-1980s. The reliability design method is classified into three categories depending on the level of probabilistic concepts being employed. In the Level 1 method, partial safety factors are used, which are predetermined depending on the allowable probability of failure. In the Level 2 method, the probability of failure is evaluated with the reliability index, which is calculated using the means and standard deviations of the load and resistance. The load and resistance are assumed to distribute normally. In the Level 3 method, the cumulative quantity of failure (e.g. cumulative damage of armor blocks) during the lifetime of the breakwater is calculated without assumptions of normal distribution of load and resistance. Each method calculates different design parameters, but they can be expressed in terms of probability of failure so that tile difference can be compared among the different methods. In this study, we applied the reliability design methods to the stability of armor blocks of the breakwaters of Donghae Harbor, which was constructed by traditional deterministic design methods to be damaged in 1987. Analyses are made for the breakwaters before the damage and after reinforcement. The probability of failure before the damage is much higher than the target probability of failure while that for the reinforced breakwater is much lower than the target value, indicating that the breakwaters before damage and after reinforcement were under- and over-designed, respectively. On the other hand, the results of the different reliability design methods were in fairly good agreement, confirming that there is not much difference among different methods.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.5
• /
• pp.145-159
• /
• 2004

The conventional method for assessment of liquefaction potential proposed by Seed and Idriss has been widely used in most countries because of simplicity of tests. Even though various data such as stress, strain, stress path, and excess pore water pressure can be obtained from the dynamic test, especially, two simple experimental data such as the maximum deviatoric stress and the number of cycles at liquefaction have been used in the conventional assessment. In this study, a new detailed assessment for liquefaction potential to reflect both characteristics of real earthquake motion and dynamic soil resistance is proposed and verified. In the assessment, the safety factor of the liquefaction potential at a given depth of a site can be obtained by the ratio of a resistible cumulative plastic shear strain determined through the performance of the conventional cyclic test and a driving cumulative plastic shear strain calculated from the shear strain time history through the ground response analysis. The last point to cumulate the driving plastic shear strain to initiate soil liquefaction is important for this assessment. From the result of cyclic triaxial test using real earthquake motions, it was concluded that liquefaction under the impact-type earthquake loads would initiate as soon as a peak loading signal was reached. The driving cumulative plastic shear strain, therefore, can be determined by adding all plastic shear strains obtained from the ground response analysis up to the peak point. Through the verification of the proposed assessment, it can be concluded that the proposed assessment for liquefaction potential can be a progressive method to reflect both characteristics of the unique soil resistance and earthquake parameters such as peak earthquake signal, significant duration time, earthquake loading type, and magnitude.

• Journal of Technology Innovation
• /
• v.26 no.3
• /
• pp.37-68
• /
• 2018

Since the 20th century, automobiles, which are the most common means of transportation, have been evolving as the use of electronic control devices and automotive semiconductors increases dramatically. Automotive semiconductors are a key component in automotive electronic control devices and are used to provide stability, efficiency of fuel use, and stability of operation to consumers. For example, automotive semiconductors include engines control, technologies for managing electric motors, transmission control units, hybrid vehicle control, start/stop systems, electronic motor control, automotive radar and LIDAR, smart head lamps, head-up displays, lane keeping systems. As such, semiconductors are being applied to almost all electronic control devices that make up an automobile, and they are creating more effects than simply combining mechanical devices. Since automotive semiconductors have a high data rate basically, a microprocessor unit is being used instead of a micro control unit. For example, semiconductors based on ARM processors are being used in telematics, audio/video multi-medias and navigation. Automotive semiconductors require characteristics such as high reliability, durability and long-term supply, considering the period of use of the automobile for more than 10 years. The reliability of automotive semiconductors is directly linked to the safety of automobiles. The semiconductor industry uses JEDEC and AEC standards to evaluate the reliability of automotive semiconductors. In addition, the life expectancy of the product is estimated at the early stage of development and at the early stage of mass production by using the reliability test method and results that are presented as standard in the automobile industry. However, there are limitations in predicting the failure rate caused by various parameters such as customer's various conditions of use and usage time. To overcome these limitations, much research has been done in academia and industry. Among them, researches using data mining techniques have been carried out in many semiconductor fields, but application and research on automotive semiconductors have not yet been studied. In this regard, this study investigates the relationship between data generated during semiconductor assembly and package test process by using data mining technique, and uses data mining technique suitable for predicting potential failure rate using customer bad data.

• Geotechnical Engineering
• /
• v.13 no.3
• /
• pp.101-122
• /
• 1997

A spiting reinforcement system is composed of a series of radially installed reinforcing spites along the perimeter of the tunnel opening ahead of excavation. The reinforcing spill network is extended into the in-situ soil mass both radially and longitudinally The sailing reinforcement system has been successfully used for the construction of underground openings to reinforce weak rock formations on several occasions. The application of this spiting reinforcement system is currently extended to soft ground tunneling in limited occasions because of lack of reliable analysis and design methods. A method of threetimensional limit equilibrium stability analysis of the smile-reinforced shallow tunnel in soft ground is presented. The shape of the potential failure wedge for the case of smile-reinforced shallow tunnel is assumed on the basis of the results of three dimensional finite element analyses. A criterion to differentiate the spill-reinforced shallow tunnel from the smile-reinforced deep tunnel is also formulated, where the tunnel depth, soil type, geometry of the tunnel and reinforcing spites, together with soil arching effects, are considered. To examine the suitability of the proposed method of threedimensional stability analysis in practice, overall stability of the spill-reinforced shallow tunnel at facing is evaluated, and the predicted safety factors are compared with results from twotimensional analyses. Using the proposed method of threetimensional limit equilibrium stability analysis of the smile-reinforced shallow tunnel in soft ground, a parametric study is also made to investigate the effects of various design parameters such as tunnel depth, smile length and wadial spill spacing. With slight modifications the analytical method of threeiimensional stability analysis proposed may also be extended for the analysis and design of steel pipe reinforced multi -step grouting technique frequently used as a supplementary reinforcing method in soft ground tunnel construction.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.301-308
• /
• 2018

This study explores an analytical mathematical model designed to estimate the optimal debt ratio of the Korean automobile industry, which has a more significant effect on the national economy than that of other industries, and attempts to estimate the optimal debt ratio based on objective data. The analytical model is based on ROA and ROE which uses the debt ratio as an independent variable and employs ROS, TAT, and NFCL as the related parameters. Regarding the NFCL, the optimal debt ratio is usually defined as the debt ratio that maximizes the ROA and ROE and is calculated using analytical procedures, such as by adding an equation that considers the debt ratio and the linearity relationship to the analytical model. This is because the optimal debt ratio can be calculated reliably by making use of an estimated value within a certain range, which is derived from more than two calculations rather than a single estimation starting from one calculation formula. In this study, for the estimation of the optimal debt ratio, the ROA and ROE are expressed as a quadratic equation with the debt ratio as the independent variable. Using this analysis procedure, the optimal debt ratio obtained using the data from the Korean automobile industry over a sixteen year period, which would optimize the profitability of the Korean automobile industry, was found to be 188% of the debt ratio in the ROA and 213% of the debt ratio in the ROE. This result was obtained by overcoming the problem of the reliability of the estimation value in spite of the limitations of the logical theory of this study, and can be interpreted as meaning that maintaining a debt ratio of 188% to 213% can enhance the profitability and reduce the risks in the Korean automobile industry. Furthermore, this indicates that the existing debt ratio of the Korean automobile industry is lower than the optimal value within the estimated range. Consequently, it is necessary for corporations to change their future debt ratio policies, given that the purpose of debt ratio management is to maintain safety and increase profitability, and to take into account the characteristics of the specific industry.

• Clinical and Experimental Pediatrics
• /
• v.49 no.12
• /
• pp.1275-1281
• /
• 2006

Purpose : Cerebral edema in meningitis is a potentially complication. Hypertonic saline of various concentrations are frequently used to treat cerebral edemas in meningitis. We analyzed the safety and efficacy of osmotic therapy in cerebral edema by comparison of various hypertonic saline concentrations and mannitol. Methods : The medical records of 42 patients, who were followed up in the Department of Pediatrics, Busan Medical Center, from Jan. 2002 to Oct. 2005, were analyzed retrospectively. We measured intracranial pressure, mean flow velocity, and various laboratory parameters. Results : In cerebral edema developed in meningitis, intracranial pressure and symptoms were improved in treatment of hypertonic saline and mannitol. Serial bolus infusion of 3 percent hypertonic saline resulted in the best outcome. There was not a statistically considerable difference on the mean values of the intracranial pressure gap. On transcranial doppler, mean flow velocity was increased and pulsatilty index was decreased. Laboratory findings (osmolarity, Na, Cl, pH, lactic acid, Ca) were diffenent during the treatment period as opposed to K, Hb, bicarbonate, base excess. There was not a specific form of hypertonic saline used in meningitis treatment with cerebral edema. Conclusion : The therapy for cerebral edema in meningitis remains largely empirical. Serial bolus infusion of 3 percent hypertonic saline is better than other hypertonic salines. Various concentrations and different infusion methods of hypertonic saline statistically does not influence the result of treatment. More research aimed at improving cerebral edema treatment is needed to identify new, effective forms of treatment.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.6
• /
• pp.2641-2647
• /
• 2012

Quality and sensory characteristics such as microbial count, pH, acidity, flavor, taste, color and overall acceptance of bamboo shoot pickle cured with red pepper paste and bamboo shoot pickle cured with soy sauce paste made of Maengjong bamboo shoots were investigated during a long-term storage at different temperature (at $25^{\circ}C$, $35^{\circ}C$ and $45^{\circ}C$). Microbial contamination was not observed, and water content did not showed significant change in all samples of both pickles during the whole storage period of 30 days, regardless of storage temperature. At $25^{\circ}C$, all sensory characteristics of bamboo shoot-red pepper paste pickle did not show a significant change for 30 d. However, at $35^{\circ}C$ and $45^{\circ}C$, the flavor, taste and color of bamboo shoot-red pepper paste pickle did not change remarkably, but the overall acceptance significantly changed from the beginning of storage. Bamboo shoot-soy sauce pickle did not give a significant change in flavor, taste and overall acceptance at $25^{\circ}C$, $35^{\circ}C$ and $45^{\circ}C$. However a remarkable change in color started to be shown at 25 d in case of storage at $45^{\circ}C$. Overall acceptance and color were selected as indicating parameters for the shelf-life estimation of bamboo shoot-red pepper paste pickle and bamboo shoot-soy sauce pickle, respectively. Based on room temperature storage and delivery at $20^{\circ}C$, the shelf-life of bamboo shoot-red pepper paste pickle and bamboo shoot-soy sauce pickle were determined as 308 d (about 10 month) and 447 d (about 14 month), respectively.

• Journal of Gastric Cancer
• /
• v.10 no.1
• /
• pp.19-25
• /
• 2010

Purpose: Laparoscopy-assisted gastrectomy (LAG) is gaining wider acceptance as a minimally invasive treatment for early gastric cancer, but the safety, efficacy and clinical benefits of this type of surgery are still unclear. The purpose of this study is to compare laparoscopy-assisted gastrectomy (LADG) and conventional open distal gastrectomy (CODG) for early gastric cancer (EGC) according to the changes of the postoperative nutritional status and acute inflammatory reaction. Materials and Methods: Eighty seven patients with EGC and who underwent a LADG between March 2006 and May 2009 at Daegu Catholic University Hospital, was enrolled. Over the same period, we enrolled 30 patients who underwent CODG and they were confirmed to have EGC from their pathology. The clinico-pathological features and serologic parameters were evaluated from the medical records and then retrospectively analyzed. Results: There were no differences in the preoperative white blood cell (WBC), C-reactive protein (CRP) level, albumin level, the T4/T8 ratio and the other clinical data between the two groups. The total WBC counts gradually increased and they were significant lower at the $1^{st}$ and $3^{rd}$ postoperative days in the LADG group than that in the CODG group (P=0.001 and 0.008, respectively). The postoperative CRP levels were significantly lower at postoperative $5^{th}$ day in the LADG group (P<0.001). The postoperative albumin and T4/T8 ratio gradually decreased, and the T4/T8 ratio was significantly higher at the $3^{rd}$ postoperative day in the LADG group compared to that in the CODG group (P=0.003). Conclusion: This study demonstrates that the LADG has less of an influence on an acute inflammatory reaction than does CODG. Therefore, it is one of the safe and feasible procedures for the treatment of early gastric cancer.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.209-220
• /
• 2018

Mating disruption (MD) has been widely used to effectively control Grapholita molesta in apple orchards. A simultaneous mating disruption (SMD) techniques have been developed to control both G. molesta and G. dimorpha. This study was performed to determine the practical parameters to apply the SMD technique to field conditions. To determine the application amount of SMD lures, a dispenser containing 10 mg pheromone was placed at different numbers of trees in an orchard. Application at every other tree (= one dispenser per two trees) was relatively safe to expect effective MD efficiency in both wax and polyethylene (PE) formulations. One time application at the end of March was enough to maintain a year round MD efficacy against both species. A fence treatment using food trap was applied to prevent any immigratory mated females from nearby untreated regions. To enhance the food trap by adding host-derived secondary compounds, terpinyl acetate (TA) was screened to be effective to attract females of Grapholita molesta among six compounds contained in apple fruit extracts. Among different TA concentrations, 0.05% TA treatment was the most effective to attract the adults. A mixture of TA and sugar was effective to attract and kill females and called FAKT (female attract-to-kill techniques). FAKT was treated at approximately 6 m interval at the edge of the apple orchards. The females trapped by the FAKT included mated females possessing vitellogenic oocytes. SMD supplemented with FAKT maintained the high MD efficacy and significantly suppressed leaf damage induced by the two insect pests compared to control or single SMD treatment.