• 제목/요약/키워드: Safety Estimation

검색결과 1,647건 처리시간 0.028초

폰툰형 플랫폼 설계 및 구조안전성 평가 (Pontoon Type Design and Structural Safety Estimation)

  • 서광철;오정모;박주신
    • 해양환경안전학회지
    • /
    • 제24권5호
    • /
    • pp.604-610
    • /
    • 2018
  • 최근, 레저활동 인구 및 산업의 비약적인 발전으로 인하여 소규모 부잔교 및 계류형 폰툰 플랫폼의 수요가 급증하고 있으며, 연안에서 주로 사용되는 구조물에 대한 설계 및 구조안전성 평가에 관련한 표준 규칙 및 상세 규칙에 대한 제정이 시급하다. 이러한 문제점들에 대한 기본적인 해결책으로 본 논문에서는 설계 시 참고할 수 있는 설계 기준을 제시하고, 설계안에 대한 구조안전성 평가 절차에 대해서도 소개한다. 본 연구논문에서는 전장 15 m 폰툰형 플랫폼의 구조설계 과정 및 유한요소해석을 통한 구조 안전성을 검토하였다. 일반적인 10 m 이하 플랫폼의 경우, 간략한 구조계산서만으로도 검토가 가능하나, 10 m 이상의 플랫폼의 경우 상세 구조강도 검토가 뒷받침되어야만 기준에서 제시하는 안전성 확보를 위한 지침에 부합할 수 있다. 유한요소해석을 통하여 설계안에 대한 구조강도 검토를 수행하였으며, 그 안전성을 확인하였다. 추후 연구로서는 다양한 하중조건을 동시에 검토할 수 있는 시스템개발이다.

V2V 환경에서 적응적 채널 추정 기법에 대한 성능 분석 (Performance Analysis of Adaptive Channel Estimation Scheme in V2V Environments)

  • 이지혜;문상미;권순호;추명훈;배사라;김한종;김철성;김대진;황인태
    • 전자공학회논문지
    • /
    • 제54권8호
    • /
    • pp.26-33
    • /
    • 2017
  • 차량통신은 도로 위 차량들 간의 효율적인 조정을 가능하게 할 수 있을 뿐만 아니라, 더 나아가 미래 차량의 어플리케이션으로 차량 안전, 인포테인먼트 그리고 자율 주행까지도 다룰 수 있다. 3GPP(3rd Generation Partnership Project)에서는 LTE(Long Term Evolution) 기반 차량 통신에 대한 표준화 연구가 활발히 진행되고 있다. 차량 통신은 안전과 밀접한 관련이 있기 때문에, 낮은 지연과 높은 신뢰성을 필요로 한다. 하지만 차량의 빠른 이동성으로 인해 V2V(Vehicle-to-Vehicle) 환경은 채널 왜곡이 매우 심하며, 높은 신뢰성의 차량 통신을 위해서 채널 추정이 매우 중요한 요소임을 알 수 있다. 이를 위해 본 논문에서는 LTE 기반 V2V 환경에서 채널 추정 기법을 제안한다. LTE 기반 업링크 시스템에서 채널 추정은 파일럿 심볼인 DMRS(DeModulation Reference Signal)를 이용한다. 기존 채널 추정 기법으로는 LS(Least Square), DDCE(Decision Directed Channel Estimation), STA(Spectral Temporal Averaging), 그리고 Smoothing이 있다. 본 논문에서는 기존의 채널 추정 기법들과 달리 파일럿 심볼에서 QS(Quadratic Smoothing)를 이용해 보다도 정확한 채널을 추정하며, 데이터 심볼에서 적응적으로 채널을 추정하는 ASCE(Adaptive Smoothing Channel Estimation) 기법을 제안한다. 모의실험 결과, 제안한 ASCE 기법이 NMSE(Normalized Mean Square Error)와 BER(Bit Error Rate) 측면에서 전체적으로 성능이 향상 된 것을 볼 수 있다.

동적 모사를 이용한 에탄 분리탑의 플레어 용량 예측에 관한 연구 (Study on the Flare Load Estimation of the Deethanizer using Dynamic Simulation)

  • 박경태;원왕연;신동일
    • Korean Chemical Engineering Research
    • /
    • 제52권5호
    • /
    • pp.613-619
    • /
    • 2014
  • 화학 공장에서 플레어 시스템은 공장의 안전에 지대한 영향을 주는 아주 중요한 요소이다. 만약, 플레어 시스템이 필요보다 작게 설계 된다면, 위급 상황 발생 시 끔찍한 사고를 유발할 수 있다. 반면, 플레어 시스템이 필요보다 크게 설계하게 된다면 공장을 건설하는데 드는 비용의 증가를 피할 수가 없게 된다. 따라서, 산업계에서는 적절한 플레어 시스템의 설계를 위해 정확한 플레어 배출량을 예측하고자 오랫동안 노력해왔다. 미국석유협회에서는 플레어 배출량 계산을 위한 가이드라인을 제시하였고, 많은 설계 회사들은 정상상태 열 및 물질 수지식을 이용한 방법을 개발하여 플레어 배출량을 예측해 왔다. 하지만, 이러한 방법들은 많은 보수적인 가정들 하에 플레어 배출량을 계산하여 필요보다 크게 설계, 막대한 비용을 초래할 수 있다. 본 연구에서는 기존 방법들이 가지는 문제들을 해결하기 위해 공정제어가 포함된 동적 모사를 통해 플레어 배출량을 계산하는 새로운 절차를 제시하였고, 이 절차에 따라 에탄 분리탑의 배출량을 성공적으로 예측함으로써 절차의 효용성을 증명하였다.

선박 초기설계단계에서 CFD를 이용한 천수 중 조종성능 추정에 관한 연구 (A Study on Estimation of Manoeuvring Performance in Shallow Water using CFD in Initial Ship Design Phase)

  • 김인태;김상현;김현준;김동영;양정규
    • 대한조선학회논문집
    • /
    • 제55권4호
    • /
    • pp.350-360
    • /
    • 2018
  • Analysis of ship's manoeuverability in shallow water is an important task from the perspective of the vessels' navigational safety. Since the number of ships operated in restricted water has increased due to the enlargement of vessels and ships represent different characteristics of the manoeuverability when operated in shallow and deep water, it is significant to evaluate ship manoeuverability at initial design stage. At the initial stage of design, the estimation of manoeuverability is generally performed with hydrodynamic coefficients estimated based on empirical formula. However, the accuracy of estimating hydrodynamic coefficients by the empirical formula in shallow water is poor compared to that in deep water. Therefore, the error in the estimation of manoeuverability increases in shallow water. In this study, CFD is proposed to improve the accuracy of manoeuverability in shallow water at the initial design stage and hydrodynamic coefficients were obtained based on PMM test in shallow water. Furthermore, the ship manoeuverability was estimated both the proposed strategy and the empirical formula. At last, validity of the proposed strategy using CFD for the estimation of manoeuverability was confirmed by comparison with the manoeuverability estimation results from model test.

시계열 분석 기반 신뢰구간 추정을 통한 효율적인 이상감지 (Efficient Anomaly Detection Through Confidence Interval Estimation Based on Time Series Analysis)

  • 김영주;허유경;박진관;정민아
    • 한국통신학회논문지
    • /
    • 제39C권8호
    • /
    • pp.708-715
    • /
    • 2014
  • 본 논문은 센서 데이터의 이상을 감지하기 위하여 실시간 신뢰구간을 추정하였다. 실시간 신뢰구간 추정은 시계열분석 방법인 지수평활법과 이동평균법의 평균제곱오차를 비교하여 오차가 적은 이동평균법을 적용하였다. 이와 같이 추정된 신뢰구간을 측정된 센서 데이터가 이탈하게 되면 이상감지 경보를 통해 관리자에게 알려준다. 제안한 방법은 선박 내부의 실시간 이상감지를 위한 것으로 무선센서네트워크(WSN)와 사용자의 접근성을 높이기 위해 안드로이드 단말기를 사용하였다. 관리자는 실시간 신뢰구간에 따른 이상감지 정보를 활용하여 선박 내부에서 발생한 위급한 상황에서 신속하고 정확하게 의사결정을 함으로써 안전운항을 할 수 있다.

차량용 레이더 시스템에서 주파수 영역의 도래각 추정 기법에 관한 연구 (The Study of DoA Estimation in Frequency Domain in Automotive Radar System)

  • 최정환;최지원;김성철
    • 한국통신학회논문지
    • /
    • 제41권1호
    • /
    • pp.12-22
    • /
    • 2016
  • 운전자의 편의와 안전을 위한 자율 주행 자동차 시스템으로 레이더 시스템이 활발히 연구가 진행되고 있다. 레이더 시스템은 전방 차량의 거리, 속도 그리고 각도를 추정한다. 도로 환경에 차량뿐만 아니라 인식해야 할 다양한 요소들이 다양해짐에 따라 고해상도 각도 추정 알고리즘이 적용되고 있다. 기존의 방식으로는 클러터들 사이에서 전방의 차량만의 각도를 추정하기 어렵고, 특히 같은 각도 상에 놓인 다른 차량들을 구분하기 힘들다. FMCW 레이더 시스템에서는 거리와 속도가 다른 차량들이 서로 다른 비트 주파수를 가지기 때문에, 비트 주파수에 기반하여 각도 추정을 할 수 있다면 효율적인 시스템을 구축할 수 있다. 본 논문에서는 MUSIC 알고리즘을 주파수 영역에서 적용하는 방법을 제시하고 적합성에 대한 분석을 한다.

스마트폰 내장 가속도계와 카메라를 이용한 케이블 장력 추정에 관한 연구 (A Study on Cable Tension Estimation Using Smartphone Built-in Accelerometer and Camera)

  • 이형진
    • 한국산업융합학회 논문집
    • /
    • 제25권5호
    • /
    • pp.773-782
    • /
    • 2022
  • Estimation of cable tension through proper measurements is one of the essential tasks in evaluating the safety of cable structures. In this paper, a study on cable tension estimation using the built-in accelerometer and camera in a smartphone was conducted. For the experimental study, visual displacement measurement using a smartphone camera and acceleration measurement using a built-in accelerometer were performed in the cable-stayed bridge model. The estimated natural frequencies and transformed tensions from these measurements were compared with the theoretical values and results from the normal visual displacement method. Through comparison, it can be seen that the error between the method using the smartphone and the normal visual displacement is sufficiently small to be acceptable. It has also been shown that those errors are much smaller than the difference between the values calculated by the theoretical model. These results show that the deviation according to the type of measurement method is not large and it is rather important to use an appropriate mathematical model. In conclusion, in the case of cable tension estimation, it can be said that the visual displacement measurement and acceleration using a smartphone can be a sufficiently applicable method, just like the normal visual displacement method. It is also noteworthy that the smartphone accelerometer has a larger magnitude error and has more limitations such as high-frequency sampling instability compared to the visual displacement method, but shows almost the same performance as the visual displacement method in this cable tension estimation.

사면(斜面)의 삼차원(三次元) 파괴확률(破壞確率)에 관(關)한 연구(硏究)(II) (A Three Dimensional Study on the Probability of Slope Failure(II))

  • 김영수;차홍준;정성관
    • 산업기술연구
    • /
    • 제3권
    • /
    • pp.53-63
    • /
    • 1983
  • The probability of failure is used to analyze the reliability of three dimensional slope failure, instead of conventional factor of safety. The strength parameters are assumed to be normal variated and beta variated. These are interval estimated under the specified confidence level and maximum likelihood estimation. The pseudonormal and beta random variables are generated using the uniform probability transformation method according to central limit theorem and rejection method. By means of a Monte-Carlo Simulation, the probability of failure is defined as; Pf=M/N N : Total number of trials M : Total number of failures Some of the conclusions derived from the case study include; 1. Three dimensional factors of safety are generally much higher than 2-D factors of safety. However situations appear to exist where the 3-D factor of safety can be lower than the 2-D factor of safety. 2. The F3/F2 ratio appears to be quite sensitive to c and ${\phi}$ and to the shape of the 3-D shear surface and the slope but not to be to the unit weight of soil. 3. In cases that strength parameters are assumed to be normal variated and beta variated, the relationships between safety factor and the probability of failure are fairly consistent, regardless of the shape of the 3-D shear surface and the slope. 4. As the c-value is increased, the probability of failure for the same safety factor is increased and as the ${\phi}-value$ is increased, the probability of failure for the same safety factor is decreased.

  • PDF

가연성가스와 증기의 폭굉한계 예측 (Prediction of the Detonation Limit of the Flammable Gas and Vapor)

  • 하동명;유현식;강석환;박동진;정진용;이명호;최원영;한승희
    • 한국화재소방학회:학술대회논문집
    • /
    • 한국화재소방학회 2008년도 춘계학술논문발표회 논문집
    • /
    • pp.131-134
    • /
    • 2008
  • 본 연구에서는 가연성혼합물의 구성하는 각 순수성분의 연소열과 기상 조성을 이용하여 폭발한계를 예측하였다. 제시된 방법론에 의한 계산값은 적은 오차범위에서 문헌값과 일치하였다. 따라서 제시된 결과로부터 제시된 방법론이 다른 가연성혼합물의 폭굉한계 예측에 폭넓게 적용되기를 기대한다.

  • PDF

Economic Validation of Maritime Safety Center in Case of Yeong-Nam Province

  • Lim, Sangseop;Kim, Kyung-Hwan
    • 한국컴퓨터정보학회논문지
    • /
    • 제26권10호
    • /
    • pp.167-172
    • /
    • 2021
  • 세월호 사고 이후 해양안전에 대한 국민적인 관심이 높아졌지만 해양레저관광인구가 증가됨에 따라 해양사고로 인한 인명피해가 갈수록 증가되는 추세이 있어 해양안전교육이 시급한 실정이다. 그러나 해양안전교육관련 시설이 지리적으로 우리나라 서쪽에 편향이 되어 있어 교육에 있어 지역적 불균형이 심각한 상황이다. 따라서 본 연구는 우리나라 동남권 특히, 부산에 위치한 한국해양수산연수원의 유휴시설을 해양안전교육센터로 활용하여 지역적 교육 불균형을 해소하고 교육콘텐츠 개발 방안과 예산과 전문인력 확보에 따른 문제점에 관하여 해결방안을 제시하였다. 또한 중력모형을 활용하여 수요추정한 결과 연간 15만명에서 13만명에 이를것으로 추정되었다. 본 연구는 객관적인 검증방법을 활용하여 기존 유휴부지를 해양안전교육센터로서 활용하는 정책적 제언에 관하여 충분한 사회정책적 타당성을 입증하였으며 향후 정책추진에 실질적 기여를 할 수 있을 것으로 기대된다.