• 해양환경안전학회지
• /
• 제19권2호
• /
• pp.193-199
• /
• 2013

파랑 중 선박의 직진성능을 시뮬레이션을 통하여 비교 검토하였다. 시뮬레이션을 구성하기위해 선박의 3자유도 조종운동방정식을 사용했으며, 선박에 가해지는 파랑강제력은 3차원 특이점 분포법을 사용하여 계산하였다. 시뮬레이션의 외란으로서 규칙파와 불규칙파를 사용하였고 최대사용타각과 제어시간지연을 제어기의 제한조건으로 설정하였다. 조종성능에 따른 직진성능을 검토하기 위해 유체력 미계수를 인위적으로 변화시킴으로서 조종성능이 다른 선박의 시뮬레이션을 구성하였다. Autopilot제어기를 사용한 일정시간의 선박의 직진 시뮬레이션을 수행하고 해당시간동안의 직진거리를 비교하여 선박의 직진성능을 검토하였다.

• Journal of Nutrition and Health
• /
• 제36권3호
• /
• pp.255-261
• /
• 2003

Food irradiation has been steadily increasing in many countries in line with increasing international trade and concerns about naturally occurring harmful contaminants in food. Although irradiation provides an excellent safeguard for the consumer by destroying almost 100% of harmful bacteria, it is necessary to ensure the safety of irradiated foods. This study was performed to investigate the effect of an irradiated diet on lipid peroxidation in the plasma, liver, small intestinal mucosa, and lymphocyte DNA damage in mice. Eight-week old ICR mice were assigned to two groups to receive either non-irradiated or irradiated (10 kGy) diets containing 20.38% fish powder and 6.06% sesame seeds for 4 weeks. The resulting changes in the degrees of lipid peroxidation were evaluated based on the level of plasma and liver thiobarbituric acid reactive substance (TBARS), transmission electron micrograph of jejunal mucosa, and free radical-induced oxidative DNA damage in lymphocytes, as measured by alkaline comet assay (single cell gel electrophoresis). The peroxide values of the gamma irradiated diet were measured every week, and the sample for comet assay was taken at the end of the four week experimental period. There was no significant difference in food efficiency ratio between the two groups. The peroxide values of the diet were immediately increased to 35.5% after gamma irradiation and kept on increasing during storage. After 4 weeks, no differences in tissue or plasma TBARS value were observed between the two groups, but epithelial cells of jejumum showed osmiophillic laminated membranous structures, considered as myelin figures,. The oxidative DNA damage expressed as tail moment (TM) increased 30% in the blood lymphocytes of the mice fed the irradiated diet. In conclusion, the comet assay sensitively detected differences in lymphocyte DNA damage after feeding with the irradiated diet for 4 weeks. However, in order to ensure the safety of irradiated foods, it would be more useful to conduct a long-term feeding regimen using an irradiated diet and examine the level of lipid peroxidation and the state of oxidative stress in a greater range of organs.

• 한국안전학회지
• /
• 제33권5호
• /
• pp.15-20
• /
• 2018

This paper describes the fusing time characteristics of Light PVC Sheathed Circular Cord(VCTF) and Tray Frame Retardant(TFR) cables according to increased temperature under over current condition. The experimental equation will be used to determine the validity and reliability of the test results. The over current flowed 3, 5 and 10 times higher than the amount of allowable current using DC power supply with DAQ(Data Acquisition) measurement system. An infrared radiation heater, which was controlled by a variable AC auto transformer, was used to increase the temperature from room temperature to 50, 100 and 150 degrees Celsius. First, two type of cables were analyzed those with different cross-sectional areas with in the same structure and those with different structures with in the same cross-sectional areas. Then, it was determined how fusing time had been influenced according to the cross-sectional areas and different structures, respectively. The cable resistance was increased by joule heating according to increasing temperature. Therefore, the allowable current of cable is decreased. Finally, the fusing time of the cable was decreased due to increased temperatures at current flow, which were 3 times the amount of allowable current. The instantaneous breakdown was observed when current flow was 5 and 10 times over the amount of allowable current. The fusing time is directly affected by the structure of cable insulation.

• 대한인간공학회지
• /
• 제34권4호
• /
• pp.327-334
• /
• 2015

Objective: The purpose of this study was to evaluate Korean workers' work ability and to identify its contributing factors. Background: In order for Korea to overcome the phenomena of becoming an aged society, older adults must participate in the workforce to balance out the population; workers' work ability must also be maintained. In addition, influential factors in employees' capabilities and degrees of importance thereof should be identified in advance to maintain work ability. Method: The Work Ability Index (WAI) questionnaire was completed by 5,708 Korean workers. Survey questionnaire consisted items of current work ability, physical and mental demands of the job, numbers of diseases, work impairment due to diseases, sick leaves, work ability in 2 years and mental resources. Results: Results indicated that work ability and length of service increased with age. It was also found that employees in administrative positions had greater work ability than site workers, workers directly managed by a supervisor had greater work ability than workers in cooperative firms, and workers who performed intellectual tasks had greater work ability than workers who performed physical labor. Job stress was additionally observed to contribute towards overall work ability. And musculoskeletal disorders (MSDs) were found to negatively affect work ability. Conclusion: The strongest determining factors in the work ability of Korean workers were stress level and mental state. Therefore, when the WAI is used to assess Korean workers, the weighting of WAI items pertaining to physical and mental abilities should be adjusted accordingly to account for these factors. Application: The result is expected to suggest that workers maintain work ability in an aged society.

• 한국지진공학회논문집
• /
• 제3권4호
• /
• pp.11-22
• /
• 1999

본 논문에서는 일반적으로 사용되고 있느 면진건축물의 내진설계기준에 대한 타당성을 검증하고 새로운 층지진하중 산정식을 제안하였다 UBC-91의 층지진하중 산정식은 충분한 안전성을 가지지 못하였으므로 94년에 개정이 되었다 그러나 개정된 산정식도 고정기초건축물과 유사한 층지진하중 산정식을 사용하였으므로 비경제성이 문제점으로 지적되고 있다 그러므로 제안된 식에서는 2자유도계 면진건축물과 고정기초건축물의 모드형상을 이용하여 안전성, 경제성 및 적용성을 만족시키도록 하였다. 제안된 층지진하중 산정식의 정확성 및 적용성을 검증하기 위하여 코멘트저항 골조형식과 전단변 구조형식의 구조물의 예제해석을 수행하였으며 동적해석의 경우와 근접한 결과를 얻었다.

• 패션비즈니스
• /
• 제12권2호
• /
• pp.134-152
• /
• 2008

Functional, aesthetic and symbolic working uniforms in the industrial complex are demanded by employees and employers. The purpose of this research was to find out the actual wearing condition and preference of the working uniform design in the industrial complex. The research selected 7 enterprise subjects located in the Changwon National Industrial Complex and adopted a questionnaire method. 912 workers categorized into 4 work groups according to their work posts replied in total. The data and the degrees of satisfaction/preference of the working uniforms were analysed into descriptive statistics and F-tests by using the SPSS S/W package. The results were as follows: First, the style of the working uniform was the standard two-piece style. Second, the degree of the satisfaction with the entrepreneurial image implied to the working uniform was 2.83 throughout the 5-scale evaluation. In addition, the degree of the satisfaction with the working uniform colors was in between 2.94 and 2.96. Third, unsatisfied parts of the upper and lower uniform garments were: sleeve > pocket > collar; and waist belt loop > hip pocket > hem line respectively. Fourth, beige was the most preferred color for the working uniform top and bottom both. The most preferred color images were the calm and safety and the bright and light in order. Especially, the demand on the safety factors and soil proof colors of the outside field workers was much higher than the clerical workers. Fifth, the blouson type jacket with shirts collar or soutien roll collar was more preferred to than the casual style; and the straight formal pants were more preferred to than the casual/sweat sports pants styles. Sixth, inner pockets to keep the mobile phone and pens were required for upper garment details specially by manufacture workers. Increase of the waist belt loop numbers was required by all work groups.

• 대한안전경영과학회지
• /
• 제4권2호
• /
• pp.11-22
• /
• 2002

In this study, an asymmetric lifting posture prediction model was developed, which was a three-dimensional model with 12 links and 23 degrees of freedom open kinematic chains. Although previous researchers have proposed biomechanical, psychophysical, or physiological measures as cost functions, for solving redundancy, they lack in accuracy in predicting actual lifting postures and most of them are confined to the two-dimensional model. To develop an asymmetric lifting posture prediction model, we used the resolved motion method for accurately simulating the lifting motion in a reasonable time. Furthermore, in solving the redundant problem of the human posture prediction, a moment weighted Joint Range Availability (JRA) was used as a cost function in order to consider dynamic lifting. However, it is known that the moment weighted JRA as a cost function predicted the lower extremity and L5/S1 joint motions better than the upper extremities, while the constant weighted JRA as a cost function predicted the latter better than the former. To compensate for this, we proposed a hybrid moment weighted JRA as a new cost function with moment weighted for only the lower extremity. In order to validate the proposed cost function, the predicted and real lifting postures for various lifting conditions were compared by using the root mean square(RMS) error. This hybrid JRA reduced RMS more than the previous cost functions. Therefore, it is concluded that the cost function of a hybrid moment weighted JRA can be used to predict three-dimensional lifting postures. To compare with the predicted trajectories and the real lifting movements, graphical validations were performed. The results also showed that the hybrid moment weighted cost function model was found to have generated the postures more similar to the real movements.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1991년도 하계학술발표회 한국항해학회
• /
• pp.45-48
• /
• 1991

This work aims to introduce the concept of microcomputer aided port design simulation methodology including the analysis of the mathematical models to be implemented and apply it to the Third Stage Busan Part Development Project. In the Busan case study the size of the proposed turning basin of the new terminal together with the operational stra-tegies of berthing and unberthing was examined In addition the safety of ships' entry and exit through the projection new breakwaters was as-certained. From the application of simulation to the Busan project it was found that the proposed dredging area was not sufficiently wide enough for a modelled container ship to perform A type unberthing (in which the ship turns to port as she monoeuvres away from No.1 berth with the ass-istance of tuges) especially in a strong easterly wind., It is therefore recommended that Busan pilots should be advised to use B type unberthing strategy in which the ship goes astern from No.1 berth to the turning area in front of No.2 berth(where the ship turns 180 degrees clockwise) especially when the wind is very strong. It is also recommended that a sea buoy be placed outside the new breakwaters as this was found to im-prove the safety of ship manoeuvres through the breakwaters significant-ly. Another recommendation is that the Korean Hydrodynamic Office carry out a detailed survey of the currents in the water area near the new breakwaters. once they have been constructed. In addition it is to be recommended that a current meter be placed at the recommended sea buoy pardised by erroneous current information

• 해양환경안전학회지
• /
• 제27권1호
• /
• pp.193-200
• /
• 2021

본 연구에서는 국부 비선형 정적 해석을 효율적으로 수행하기 위하여 강성응축(Static condensation)을 활용한 해석기법을 제시하였다. 강성응축기법은 자유도 기반의 유한요소 모델 축소기법이며, 해석 모델을 관심 대상(Target) 부분과 응축되어 생략될(Omitted) 부분으로 구분한다. 본 연구에서는, 관심 대상 부분에는 비선형 영역, 생략될 부분에는 선형 영역으로 지정하였고, 선형 영역에 대응되는 강성 행렬 및 하중 벡터를 비선형 영역, 즉 관심 대상 부분으로 모두 응축하였다. 모델 응축 후에는 비선형 영역에 대한 강성 행렬 및 하중 벡터만으로 이루어진 축소 모델을 구성하였으며, 이 축소 모델만을 뉴턴-랩슨 반복(Newton-Raphson iteration)을 통해 갱신하여 효율적으로 비선형 해석을 수행하였다. 끝으로, 제안된 기법을 다양한 수치 예제에 적용하여 해석기법의 효율성과 신뢰성을 제시하였다.

• Transactions on Control, Automation and Systems Engineering
• /
• 제4권1호
• /
• pp.9-16
• /
• 2002

In this paper, we intend to demonstrate a new intuitive force-feedback device for advanced VR applications. Force feed-back for the device is tension based and is characterized by 7 degrees of freedom (DOF); 3 DOF for translation, 3 DOF for rotation, and 1 DOF for grasp). The SPIDAR-G (Space Interface Device for Artificial Reality with Grip) will allow users to interact with virtual objects naturally by manipulating two hemispherical grips located in the center of the device frame. We will show how to connect the strings between each vertex of grip and each extremity of the frame in order to achieve force feedback. In addition, methodologies will be discussed for calculating translation, orientation and grasp using the length of 8 strings connected to the motors and encoders on the frame. The SPIDAR-G exhibits smooth force feedback, minimized inertia, no backlash, scalability and safety. Such features are attributed to strategic string arrangement and control that results in stable haptic rendering. The design and control of the SPIDAR-G will be described in detail and the Space Graphic User Interface system based on the proposed SPIDAR-G system will be demonstrated. Experimental results validate the feasibility of the proposed device and reveal its application to virtual reality.