• Safety and Health at Work
• /
• v.1 no.1
• /
• pp.19-28
• /
• 2010

Industrial Safety and Health Law (ISH Law) of Japan requires abnormalities identified in evaluations of worker health and working environments are reported to occupational physicians, and employers are advised of measures to ensure appropriate accommodations in working environments and work procedures. Since the 1980s, notions of a risk assessment and occupational safety and health management system were expected to further prevent industrial accidents. In 2005, ISH Law stipulated workplace risk assessment using the wording "employers shall endeavor." Following the amendment, multiple documents and guidelines for risk assessment for different work procedures were developed. They require ISH Laws to be implemented fully and workplaces to plan and execute measures to reduce risks, ranking them from those addressing potential hazards to those requiring workers to wear protective articles. A governmental survey in 2005 found the performance of risk assessment was 20.4% and common reasons for not implementing risk assessments were lack of adequate personnel or knowledge. ISH Law specifies criminal penalties for both individuals and organizations. Moreover, under the Labor Contract Law promulgated in 2007, employers are obliged to make reasonable efforts to ensure employee health for foreseeable and avoidable risks. Therefore, enterprises neglecting even the non-binding provisions of guidelines are likely to suffer significant business impact if judged to be responsible for industrial accidents or occupational disease. To promote risk assessment, we must strengthen technical, financial, and physical support from public-service organizations, encourage the dissemination of good practices to reduce risks, and consider additional employer incentives, including relaxed mandatory regulations.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1161-1165
• /
• 2009

Safety of workers and productivity in construction site are affected according to the conflict status of work spaces which are performed at a time. The interference among the work spaces in construction site should be minimized because it becomes a blocking factor that causes construction delay and low productivity. Those factors can be managed by reasonable H&S (Health & Safety) practice. This research suggests the requirements of H&S practice and rules to establish the strategy of H&S management based on the literature reviews related to H&S rule. The suggested H&S rule can be visualized for searching space conflict point if the rule is linked with visual simulation tool. Accordingly the research results can be used for improving and visualizing construction productivity by work space control in 4D/nD CAD system.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.1
• /
• pp.11-19
• /
• 2014

Prevention of the disasters is the best welfare to workers and it brings the growth and stability of an enterprise, finally uplifts the national competitiveness. Because small-scale businesses do not have safety and health managers, the government provides a wide range of safety and health management supports to small-scale businesses. However despite of this government's effort, the industrial accident rate of small-scale businesses does not decline, which is mainly because the projects are not differentiated according to the risk level of individual business. Therefore, this paper aims to obtain implications concerning a plan to conduct a reliable assessment of education through a safety job assessment, and to build a framework which may improve a technical area through the AHP analysis.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.183-188
• /
• 2004

Recently occupational safety and health literatures begin to emphasize the influence of social, organizational or psychological context. Based on this research trend, this paper tried to review the relationship between safety climates and safety compliance. Based on the responses from 385 manufacturing workers, this paper reviewed the relationships among safety climates, safety motivation, and safety compliance. The results of statistical analysis showed that all safety climate factors(management involvement, leadership, safety training, precaution activities, safety system) have affirmative effects on safety motivation and safety compliance. Also, safety motivation appeared to have mediating effects on the relationship between 5 safety climate factors and safety compliance. Especially it appeared to have full mediating effects on the relationship between safety training/ safety system and safety compliance.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.11-24
• /
• 2004

Recently occupational safety and health literatures begin to emphasize the influence of social, organizational or psychological context. Based on this research trend, this paper tried to review the relationship between safety climates and safety compliance. Based on the responses from 385 manufacturing workers, this paper reviewed the relationships among safety climates, safety motivation, and safety compliance. The results of statistical analysis showed that all safety climate factors(management involvement, leadership, safety training, precaution activities, safety system) have affirmative effects on safety motivation and safety compliance. Also, safety motivation appeared to have mediating effects on the relationship between 5 safety climate factors and safety compliance. Especially it appeared to have full mediating effects on the relationship between safety training/ safety system and safety compliance.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.723-733
• /
• 2020

Purpose: This study was designed to draw up problems with the safety and health diagnosis system, and designed a hierarchical survey model of the clauses prescribed by the Occupational Safety and Health Act. The purpose of the survey is to derive the effectiveness of the safety and health diagnosis system at the construction site by targeting three groups of experts. Method: This paper set up the legal status analysis and overseas related system analysis and AHP hierarchy analysis survey model. In addition, the validity of the analysis results was verified by a survey. Results: The analysis of the survey items showed a high importance on items included in the human utilization and the precision of the pre-plan. In particular, mid-sized construction companies showed the highest importance for their active activities after the safety and health diagnosis. Conclusion: Through this study, we should recognize problems for improving the safety and health system of construction industry and prepare policy and institutional improvement measures for experts.

• Health Policy and Management
• /
• v.25 no.3
• /
• pp.174-184
• /
• 2015

This paper reviewed structure and current status of laws related to patient safety using patient safety law matrix to promote systematic approach in legal system of patient safety. Laws related to patient safety can be divided into three areas: laws for preventing; laws for knowing about; and laws for responding. In the case of Korea, gaps are especially prominent in the areas of laws for knowing about and responding. Patient safety law which will be enacted in July 2016 will fill the gap in the area of laws for knowing about. This law will be comprehensive law, covering the full spectrum of laws related to patient safety. However, after reviewing current patient safety law in Korea, the following drawbacks were identified: absence of code for grasping the current patient safety level; absence of code for mandatory reporting in patient safety reporting system; and absence of code for privilege about patient safety work product. Furthermore we need wider discussions about covering issues of open disclosure, apology law, coroners system, and complaint management system in patient safety law.

• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.129-134
• /
• 2004

Educational programs for promoting occupational safety and health have widely been established in advanced countries, such as United States and Germany, in the area of disaster prevention Focused attentions and investments for safety and health education have been placed especially for small and medium sized companies. Recently, information technologies have also been applied for the development and management of educational programs in those countries. It is also worth noting that a wide variety of incentive systems has been implemented for managers and workers to voluntarily Participate in safety and health education. Based on the brief survey on incentive systems in advanced countries, this study proposes two different incentive models, such as 'Supervision Exemption Model for Participants in Safety and Health Education' and 'Compensation Program fur Educational Expenses and Losses', which may efficiently be employed in Korea. These incentive models may contribute to revitalizing the occupational safety and health education which has recently been dwindled due to the changes in governmental regulations.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.2
• /
• pp.1-8
• /
• 2016

This study organizes not only the middle-long term developing plan of safety health education to put emphasis on a manufacturing industry, but also the developing plan of activating the domestic safety health education. On the basis of this study, current safety health education can be developed. To achieve a goal of implementing domestic safety health education, this study is carried out more deeply as follows.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.17-23
• /
• 2019

The applications of information and communication technology (ICT) into real industrial fields are getting great attentions in recent years. More and more industrial practitioners and scientific researchers are conducting studies and trying to adopt the technologies into diverse industrial fields. The purpose of this study is to review the technologies such as big data and smart sensors and to provide application cases in order to facilitate grafting the 4th industrial revolutionary technologies onto the safety and health systems. Based on the comprehensive reviews on literature, reports, and industrial cases, we found that big data technology has been used in industries for investigating work related disease. In addition, digital image technology and drone have been applied to establish safety system in construction industry. Lastly, some companies have tried to apply the technologies to build their own safety and health system.