• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.54 no.7
• /
• pp.309-316
• /
• 2005

In this paper we analyzed a dangerous failure and a safety requirement based on HIA (Hazard Identification and Analysis) of an interface model between CTC (Centralized Traffic Control) system and El (Interlocking) system, and assigned SU (Safety Integrity Level) by way of an risk estimation of the interface, which employed PHA (Preliminary Hazard Analysis) for the interface of the track control system, being managed as separated system between the centralized traffic control system and the interlocking system, An estimation which satisfies a safety reference of the international standard has been achieved through a quantification of the system failure rate and the dangerous failure rate of the interface model.

• Journal of the Korean Society of Safety
• /
• v.12 no.2
• /
• pp.70-79
• /
• 1997

This paper presents a study on the fuzzy linguistic variable based approach for safety assessment of human body in ELF electromagnetic field considering power system states. To cope with the demand in modern industry, the power system becomes larger in scale, higher in voltage. The advent of high voltage system has increased the relative importance of field effects. The analysis of ELF electromagnetic field based on Quasi-Static Method is introduced while the power system is included to model the expected and/or unexpected uncertainty caused by the load fluctuation and parameter changes. In order to analyze the power system, Monte Carlo simulation method and contingency analysis method are adopted in normal state and alert state, respectively. In the safety assessment of human body, the approach based on fuzzy linguistic variable is employed to overcome the shortcomings resulting from a crisp set concept. The suggested scheme is applied to a sample system(modified IEEE 14 bus system) to validate the usefulness.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.97-103
• /
• 2016

This study investigates effects of partially earth anchored cable system on the structural safety for a long-span cable-stayed bridge under dynamic loads such as seismic and wind load. For a three span cable-stayed bridge with a main span length of 810 m, two models are analyzed and compared; one is a bridge model with a self anchored cable system, the other is a bridge model with a partially earth anchored cable system. By performing multi-mode spectrum analysis for a prescribed seismic load and multi-mode buffeting analysis for a fluctuating wind component, the structural response of two models are compared. From results, the partially earth anchored cable system reduce the maximum pylon moment by 66% since earth anchored cables affect the natural frequencies of girder vertical modes and pylon longitudinal modes. In addition, the girder axial forces are decreased, specially the decrement of the axial force is large in seismic load, while girder moment is slightly increased. Thus, the partially earth anchored cable system is effective system not only on reduction of girder axial forces but also improvement of structural safety of a cable-stayed bridge under dynamic loads such as seismic and wind loads.

• Journal of the Korea Safety Management & Science
• /
• v.16 no.4
• /
• pp.159-165
• /
• 2014

For the hydrogen economy system being tried starting with the 21st century, the fields that was not dealt with so far, such as the safety measure for large leakage accidents, the safety problem at infrastructures like a hydrogen station, the safety problem in terms of automobiles depending on introduction of hydrogen cars, the safety problem in a supply for homes like fuel cells, etc., are being deeply reviewed. In order to establish a safety control system, an essential prerequisite in using and commercializing hydrogen gas as an efficient energy source, it is necessary to conduct an analysis, such as analysis of hydrogen accident examples, clarification of physical mechanisms, qualitative and quantitative evaluation of safety, development of accident interception technologies, etc. This study prepared scenarios of hydrogen gas leakage that can happen at hydrogen stations, and predicted damage when hydrogen leaks by using PHAST for this.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.2
• /
• pp.65-73
• /
• 2017

The objective of this study is to suggest the templates for the terminology standardization cases of safety standard on integrated management system, so that integrated management of safety standards is introduced to replace redundant, or conflicting functions and performance of these standards. And to carry out the terminology standardization enables management efficiently. Therefore this study suggests and analyzes cases of terminology standardization of domestic and international research trends. In addition to proposes a architectural schema for disaster safety standard and writing disaster safety standardizations of the International Organization for Standardization. For the objectives, the guidelines on standard terminology policy, terminology publication and guide development proposed by the International Organization for Standardization. Disaster safety standards were applied in order to build and utilize integrated management system of disaster safety standards through domestic and foreign cases. Throughout the result of this study, this study will contribute to the analysis and application of semantic knowledge based analysis throughout the ontology information linked the vocabulary to vocabulary by making the template of the disaster safety standards for easy to use and simple etc. This study is to expect traceability for the principle national disaster safety standards resource elements.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.10
• /
• pp.54-59
• /
• 2015

In this paper, we evaluate safety of grounding system which is designed according to IEC standards. Safety assessment of construction site and grounding system of building is needed before construction for the safety of human in building. Until now, in case of domestic field, design of grounding system is proceeded based on methods which are proposed in IEEE Std. 80. In other words, it is not in the situation that grounding system is designed based on IEC standards. Therefore, we propose a method which designs grounding system and evaluates safety of it according to IEC standards. We measure ground resistance of construction site using measuring equipment of ground resistance. Using this value, soil structure and ground resistivity are obtained through program analysis. CDEGS program of SES company is used for simulation analysis.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.4
• /
• pp.91-102
• /
• 2000

Nowadays, every kind of system is changed so complex and enormous, it is necessary to assure system reliability, product liability and safety. Fault tree analysis(FTA) is a reliability/safety design analysis technique which starts from consideration of system failure effect, referred to as “top event”, and proceeds by determining how these can be caused by single or combined lower level failures or events. So in fault tree analysis, it is important to find the combination of events which affect system failure. Minimal cut sets(MCS) and minimal path sets(MPS) are used in this process. FTA-I computer program is developed which calculates MCS and MPS in terms of Gw-Basic computer language considering Fussell's algorithm. FTA-II computer program which analyzes importance and function cost of VE consists. of five programs as follows : (l) Structural importance of basic event, (2) Structural probability importance of basic event, (3) Structural criticality importance of basic event, (4) Cost-Failure importance of basic event, (5) VE function cost analysis for importance of basic event. In this study, a method of initiation such as failure, function and cost in FTA is suggested, and especially the priority rank which is calculated by computer-aided decision analysis program developed in this study can be used in decision making determining the most important basic event under various conditions. Also the priority rank can be available for the case which selects system component in FMEA analysis.

• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.178-180
• /
• 2002

Limitation countermeasure on harmonics occurred by power conversion installation, motor speed control equipment, and so on of power system is very important problem, and first of all, accuracy harmonics analysis in system is required for appropriate limitation counterplan. Analysis and judgement on power system harmonic by measurement are needed because analysis by mathematical model generally used for these harmonic analysis, if nonlinear ingredient is included in system, is not relatively correct. So, in this paper, system to measure and analyze harmonic by installing it in a power system, using DSP(Digital Signal Processor), is designed and developed. Also, it's performance is verified by installing it in the system that harmonics occurred.

• International Journal of Safety
• /
• v.6 no.2
• /
• pp.38-42
• /
• 2007

As railway signaling system is computerized, the significance on safety demonstration and assessment has been increased. Therefore, railway signaling system should reflect the needs for safety assessment technique. Various studies on safety assessment technique for railway signaling have been made in Europe and standardization of the requirements for safety acceptance has been initiated by IEC. In order to develop and establish the safety assessment techniques for railway signaling in Korea, we try to review safety assessment activities for signaling system via reviewing relevant case studies and consulting with experts. And also we propose the safety assessment activity/methodology for Korean railway signaling system.

• Journal of the Korean Society of Safety
• /
• v.8 no.4
• /
• pp.61-64
• /
• 1993

Until now, Industrial robotic sa(ety problems are not considered as a indust rial safety problems. In order to reduce industrial robotic safety problem, analyzing problem, risk control, and developing industrial robotic standard s are necessary. In this study, SAFEMIR(Safety Management for Industrial Robotic) is developed for preventing mul-function in industrial robotics. This system is consisted of Da ta Base Management System Module and Expert System Module which Is a part of Articial In telligence. Borland C++ and Foxpro 2.0 are used for implementing this system.