• 한국산업융합학회 논문집
• /
• 제26권5호
• /
• pp.825-831
• /
• 2023

The propellers used for big ships have a large diameter and are very heavy. In order to apply a precise and safe work process to them, it is necessary to use an exclusive turning system. For this reason, various techniques are applied to produce them. However, workers' convenience and safety are not taken into consideration enough at production sites. Conventionally, these propellers are designed to be separated as their turning system is loaded and rotated by empty weight. Therefore, it is necessary to replace such a design. This study tries to find the weaknesses of the design and structure of a conventional propeller turning system for large ships, to verify structure integrity of a structure in structural analysis, and to devise a plan for designing a new type of turning system. In the basic concept design and structural analysis for the turning system used in the propeller finishing process for large ships, this study drew the following conclusions. It was possible to develop the work process of the turning system for the propeller finishing process used for large ships, to obtain the dimensions for exterior design through a basic design. Structural analysis was conducted to find the structure integrity of the turning system. As a result, in the rail installed to transfer a gantry, the maximum stress was about 45MPa, about 5.5 times lower than the yield strength 250MPa. Therefore, the turning system was judged to be safe structurally.

• 한국안전학회지
• /
• 제27권2호
• /
• pp.72-77
• /
• 2012

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as earth works, drainage works, pavement works, appurtenant works and etc based on accident examples and investigation on actual condition in roads construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.73-80
• /
• 2011

There are insufficient models that find problems and solutions for accident prevention through risk assessment and suggest safe work process and work instruction from foundation works to finish work for accident decrease. This paper presents a quantitative risk assessment model by analysis of risk factors in each process such as foundation, erection, pier, pier upper and etc based on accident examples and investigation on actual condition in bridges construction work. In addition, the safety management system was developed to perform risk assessment of construction and use it for effective safety training for labor.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.536-543
• /
• 2008

When the electric motor car was first introduced, an engineer, responsible for the work related to operation and a conductor for the announcement and management of entrances and the other services like as monitoring the passengers in the platforms used to take together the train for passengers' safe. As new technologies developed and the urban transit system had the automatic driving facilities, automatic door switch and broadcasting systems, to solve the financial problems, most subway systems introduced the one-man operation system. To curtail the operating expense through automatic control and operation for the economical efficiency, the crewless driving system was introduced abroad around 1970 on the light weight train and Japan started the crewless driving system in 2005, Germany started it in June 2008. We examine system requirements of the system and methods to construct safe systems that would be introduced, suitable for one-man operation system or crewless driving system through the surveys and analysis of driving state and the systems.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2005년도 춘계학술대회 논문집
• /
• pp.263-271
• /
• 2005

해상 준설선을 이용한 항로의 준설시공 과정에서 중요한 점은 작업구역의 공간적 축소로 여유통항수역의 제공과 수면하의 위험물 배제로 안정항행을 제공하는 것이 기본이다. 이를 위해서는 준설선의 이동과 고정을 위한 보조장치의 적극적인 활용과 함께 부대 장비의 실시간 위치 확인, 실시간 준설수심 확인 및 작업정보 등을 통합적인 정보로 제공하여 준설 작업의 자동화를 꾀해야 한다. 그런데, 본 연구에서 스퍼드 제어시스템을 비치한 준설선은 준설 시공시 준설구역 내 준설점 위치로 이동을 스퍼드로 하고 스퍼드는 자동제어 기술을 적용하여 준설선이 능동적 이동에 의한 준설시공을 행하여 최소의 작업공간을 점유하게 되므로 항행하는 타 선박의 안전한 통과를 허용하면서 준설공사를 중단 없이 시공할수 있다. 또한, 스퍼드 활용 항로준설시스템은 스퍼드의 거동쾌적은 물론 전자해도와 함께 작업심도 자료를 동시에 제공하므로 신속한 작업성과까지도 제시할 수 있다는 점에서 기존의 관리시스템과는 비교가 된다. 시스템 평가를 위한 부상항에서의 시험시공결과 일일 작업 시 기존의 앵카시스템을 이용한 작업시간의 2배정도를 실제 투입할 수 있었으며, 준설시공 요건별 비교에서도 준비시간을 38% 절감할 수 있었으며, 준비작업에 필요한 작업인력을 1인 줄일 수 있는 것으로 나타났다.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.395-402
• /
• 2005

해상 준설선을 이용한 항로의 준설시공 과정에서 중요한 점은 작업구역의 공간적 축소로 여유통항수역의 제공과 수면하의 위험물 배제로 안전항행을 제공하는 것이 기본이다. 이를 위해서는 준설선의 이동과 고정을 위한 보조장비의 적극적인 활용과 함께 부대 장비의 실시간 위치확인, 실시간 준설수심 확인 및 작업정보 등을 통합적인 정보로 제공하여 준설 작업의 자동화를 꾀해야 한다. 그런데, 본 연구에서 스퍼드 제어시스템을 비치한 준설선은 준설 시공시 준설구역 내 준설점 위치로 이동을 스퍼드로 하고 스퍼드는 자동제어 기술을 적용하여 준설선의 능동적 이동에 의한 준설시공을 행하여 최소의 작업공간을 점유하게 되므로 항행하는 타 선박의 안전한 통과를 허용하면서 준설공사를 중단 없이 시공할 수 있다. 또한, 스퍼드 활용 항로준설시스템은 스퍼드의 거동괘적은 물론 전자해도와 함께 작업심도 자료를 동시에 제공하므로 신속한 작업성과까지도 제시할 수 있다는 점에서 기존의 관리시스템과는 비교가 된다. 시스템 평가를 위한 부산항에서의 시험시공결과 일일 작업 시 기존의 앵카시스템을 이용한 작업시간의 2배정도를 실제 투입할 수 있었으며, 준설시공 요건별 비교에서도 준비시간을 $38\%$ 절감할 수 있었고 준비작업에 필요한 작업인력을 1인 줄일 수 있는 것으로 나타났다.

• 한국안전학회지
• /
• 제25권1호
• /
• pp.57-61
• /
• 2010

Formwork is a temporary structure that supports its weight and that of fresh concrete as well as construction live loads. Scaffoling is a temporary frame used to support people and material in the construction or repair of buildings and other large structures. It is usually a modular system of metal pipes, although it can be made out of other materials. Bamboo is still used in some Asian countries like China. The purpose of a working scaffold is to provide a safe place of work with safe access suitable for the work being done. In construction site, steel pipes are usually used as scaffolds. In this study, scaffolding systems which is changed according to sleeper and joist space were measured by buckling test. Buckling load of respective scaffolding system was analyzed by structural analysis program(MIDAS). Buckling load of scaffold with/without wall connection and footboard was got by test and structural analysis. According to these results，we know that scaffolding system of case 3 is suitable. Buckling load of scaffold with wall connection is higher than without wall connection. So wall connection is important in scaffoling systems. Footboard in the scaffolding systems is not effective against promotion of buckling load. Finally, the present study results will be used to design scaffolding systems safely in the construction sites.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.768-769
• /
• 2016

뜻하지 않은 재앙과 쾌적한 작업 환경을 구축하기 위해, 위험으로부터 안전한 조작을 유지하기 위한 모니터링 시스템이 필요하다. 실제 다양한 USN 환경에서의 문맥인식 모니터링을 자유롭게 제공하기 위한 응용에 대한 연구들이 필요하다. 본 논문에서는 모바일 폰이나 추론 엔진을 이용하여 작업 환경 모니터링 정보에 대한 시스템의 한가지를 제안하였다. 먼저, 모바일 작업 환경 시스템의 구조를 설계하였고, 또한, 데이터 조작, 추론 엔진, 데이터 베이스 및 지식기반의 응용에 대해 제안하였다.

• 한국안전학회지
• /
• 제14권1호
• /
• pp.158-166
• /
• 1999

Due to the work characteristics of shipyard industry, subcontractors are essential and employees of them consist of 25% of the total employee. Problems of their safety management are as follows; - obscurity of safety management responsibility - flimsiness of subcontractor's safety awareness - absence of ability to develop safety techniques and to provide safety equipments - lack of opportunity of safety education The purpose of this study is modelling safety management system of shipyard industry subcontractors to reduce industrial accidents by employees of subcontractors. A phased model contained organization and work responsibility of related departments, safety management planning and evaluation system, safe work supporting system, safety education supporting system.

• Nuclear Engineering and Technology
• /
• 제50권6호
• /
• pp.860-868
• /
• 2018

This article presents a new design of earthquake instrumentation that is suitable for quick decision-making after the seismic event at the nuclear power plant (NPP). The main objective of this work is to ensure more availability of the NPP by expediting walk-down period when the seismic wave is incident. In general, the decision-making to restart the NPP after the seismic event requires more than 1 month if an earthquake exceeds operating basis earthquake level. It affects to the plant availability significantly. Unnecessary shutdown can be skipped through quick assessments of operating basis earthquake, safe shutdown earthquake events, and damage status to structure, system, and components. Multidecision parameters such as cumulative absolute velocity, peak ground acceleration, Modified Mercalli Intensity Scale, floor response spectrum, and cumulative fatigue are discussed. The implementation scope on the field-programmable gate array platform of this work is limited to cumulative absolute velocity, peak ground acceleration, and Modified Mercalli Intensity. It can ensure better availability of the plant through integrated decision-making process by automatic assessment of NPP structure, system, and components.