• Korean Journal of Applied Biomechanics
• /
• v.18 no.2
• /
• pp.85-94
• /
• 2008

The purpose of this study is to provide basic materials for amateur golf players or golf maniacs to learn desirable iron swing motions. This study compared and analyzed the swing motions of iron clubs(3, 6, 9) by using 3-D in three elite golf players. 1. There was no a great difference in the total of swing time by club and the time by phase was nearly similar. 2. There was no a difference in the change in a head location at address and impact by club. 3. The angle change in a right knee joint was similar by club except the difference according to the length of the club. 4. There was a subtle difference in hip rotation angle by club. 5. In each club, the same rotation angle of shoulder joint at address and impact motions contributed to accurate swing, and the maintenance of more than $90^{\circ}$ of shoulder rotation angle in top swing increased swing rotation. 6. Although subtle, the forward angle of upper body was increased with a shorter club. $30-36^{\circ}$ of forward angle of upper body was maintained at address, top swing, and impact motions.

• Korean Journal of Applied Biomechanics
• /
• v.15 no.3
• /
• pp.95-104
• /
• 2005

To know the proper setup posture for the various clubs, changes of setup variables according to the change of golf club length was investigated. Swing motions of three male low handicappers including a professional were taken using two high-speed videocameras. Four clubs iron 7, iron 5, iron 3 and driver (wood 1) were selected for this experiment. Three dimensional motion analysis techniques were used to get the kinematical variables. Mathcad and Kwon3D motion analysis program were used to analyze the position, distance and angle data in three dimensions. The variables divided into three categories 1) position and width of anterior-posterior direction 2) position and width of lateral direction 3) angles and evaluated based on the theories of many good golf teachers. Major findings of this study were as follows. 1.The stance (distance between ankle joints) was increased as the length of the club increased but the increasing width was not large. It ranges from 5cm to 10cm and professional player showed small changes. 2. Forward lean angle of trunk was decreased (more erected) as the length of the club increased. It ranges from 30 degrees for iron7 to 25 degrees for driver. 3. Angle between horizontal and right shoulder were increased as the length of the club increased. It ranges from 10 degrees to 20 degrees and professional player showed small changes. 4. Anterior-posterior position of the shoulders were located in front of the foot for all clubs and the difference between the shoulder and knee position was decreased as the length of the club increased. 5. Anterior-posterior position of grip (hand) was located almost beneath the shoulders (2.5cm front) for iron7, but it increased to 10cm for the driver. This grip adjustment makes the height of the posture increased only 5cm from iron7 to driver. 6. Lateral position of grip located at 5cm left for the face of iron7, but it located at the right side (behind) for the face of driver. 7. Lateral position of the ball located at the 40%(15cm) of stance from left ankle for iron7 and located at the 10% (5cm) of stance for driver. 8. Head always located at the right side of the stance and the midpoint of the eyes located at the 37% of stance from the right ankle for all clubs. This means that the axis of swing always maintained consistently for all clubs. 9. Left foot opened to the target for all subject and clubs. The maximum open angle was 25 degrees. Overall result shows that the changes of the setup variables vary only small ranges from iron7 to driver. Paradoxically it could be concluded that the failure of swing result from the excessive changes of setup not from the incorrect changes. These findings will be useful for evaluating the setup motion of golf swing and helpful to most golfers.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.19 no.8
• /
• pp.843-849
• /
• 2009

The reliable operation of a swing check valve in the main feed water system of a power plant is most essential for successful shout-down process. A failure to close the valve at proper time often leads to the instability of the main feed water system, or even to an emergency stop of the power plant. In reality it is a very difficult task to monitor the behavior of a swing check valve. Furthermore it is impossible to see the motion of the valve. In this work two measurements were carried out simultaneously to determine the precise valve closure time. The dynamic pressure measurements were made at the inlet and outlet regions of the swing check valve. The transient vibration of the valve housing in the direction of water flow was also measured, which enabled the measurement of the transient vibration of the valve housing near valve closure. By comparing the results produced from these measurements the precise valve closure time could be determined. By carrying out order tracking technique using the dynamic pressure signals and pump rpm signal, the complicated dynamic problems inside the main feed water system can be more easily dealt with. This measurement scheme might be implemented in a power plant on a real-time basis without much difficulty. If this could be implemented, valuable information essential for shut-down operations can readily be passed on to the main control room. The feasibility of this implementation was demonstrated by this experimental work.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.4
• /
• pp.483-488
• /
• 2015

Objective : The purposes of this study was to analyze the locomotive movement of forelimbs according to changes in velocities in the quadruped cadence of horses. Methods : Horses selected as subjects consisted of Jeju pony horses (heights of withers: $1.23{\pm}0.51$). Two camcorders (HDR-HC7/HDV 1080i, Sony Corp, Japan) were used to capture the movement of the horses' forelimbs at a rate of 60 frames/sec. Additionally, raw data was collected from Kwon3D XP motion analysis package ver 4.0 program (Visol, Korea) with DARTFISH (DFKREA., Korea) video software solution. The variables analyzed consisted of 1 step lengths, 1 stride lengths, stance time, swing time, 1 stride time, velocity while walking, and trot of the horses. A two-way ANOVA and paired t-test of the variables by velocity and phase were treated at .05 level of significant difference, statistically. Results : The time elapsed of walk(stance: 0.63 sec[63.86%], swing: 0.35 sec[36.14%], 1 stride time: 0.99 sec respectively) showed significant difference with more delay than that of trot(stance: 0.29 sec[45.73%], swing: 0.34 sec[54.27% ], 1 stride time: 0.63 sec respectively), and also showed significant difference at trot in interaction (stance time>tort swing>walk swing>walk stance). The 1 step lengths and stride lengths in trot showed significant difference with longer than that of walk. Velocity of Trot showed significant difference statistically with higher than that of walk Conclusion : The horses' velocity during 1 step lengths and 1 stride lengths showed a proportional relationship, but the correlation between the horses' velocity and stance time showed a negative relationship during the quadruped cadence.

• Journal of The Korean Association For Science Education
• /
• v.25 no.5
• /
• pp.583-594
• /
• 2005

This study examined 8th-graders' conceptions of force on a simple pendulum and investigated cognitive conflict and conceptual change through kinesthetic experience in swing. Participants of this study were guided to anticipate the direction of total force acting on a pendulum at three critical positions and observed it through swing experience. Having completed this, students read an article explaining the results they observed. Most of them considered gravity, tension, and motion-force to be the real forces acting on a pendulum in pre-test. Though they were interested in the activity and conceded their expectations to be different from observed results, the degrees of their cognitive conflict were not significantly high. In summation, 'interest' was the highest and 'anxiety' was the lowest. Most of the students memorized the direction of forces on a swing, but few could explain the reason behind the occurrence in an immediate post-test and delayed post-test.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.11
• /
• pp.1407-1413
• /
• 2013

The swing motion drive unit of a hybrid excavator is composed of an electrical motor instead of a hydraulic motor that is used in hydraulic excavators. The method to assess and guarantee the reliability of a hybrid excavator should consider combining the mechanical and the electrical failure mode effects. In particular, the swing reduction gear set of a hybrid excavator is operated under severe outdoor conditions; therefore, an accelerated life test, which is based on field operating condition, should be conducted for the newly developed reduction gear set. In this study, various qualitative methods for reliability engineering, such as FMMA, FMECA, FTA, and QFD, were used to develop the accelerated life test method for the swing drive reduction gear set for the hybrid excavator.

• Korean Journal of Applied Biomechanics
• /
• v.13 no.2
• /
• pp.13-28
• /
• 2003

The purpose of this study was to analyze the kinematic characteristics of Ice hockey slap shot. The subjects of this study were four professional ice hockey players. The reflective markers were attached on the anatomical boundary line of body and the subjects were asked to perform the shot. Ariel Performance Analysis System was used to capture and digitize the shooting image, the data were analyzed by LabView 6i. The results were as fellows. 1. The period of the back swing phase was $0.542{\pm}0.062sec$, the down swing phase was $0.28{\pm}0.056sec$ and the total swing time was $0.825{\pm}0.017sec$ 2. The maximum linear velocity of the stick blade for x direction was shown after 7% of impact, for y, z direction were shown before 2%, 8% of Impact. 3. The maximum velocity of each segment for the left arm was $2.35{\pm}0.05m/s$ in the upper arm, $3.56{\pm}0.34m/s$ in the forearm, $4.75{\pm}0.67m/s$ in the hand. 4. The maximum velocity of each segment for the right arm was $4.67{\pm}0.43m/s$ in the upper arm, $7.22{\pm}0.69m/s$ in the forearm, $9.42{\pm}0.89m/s$ in the hand. 5. The angle of left elbow was generally flexed from the ready stance to the impact and was $82.26{\pm}3.45^{\circ}$ the moment of Impact. 6. The angle of the left shoulder was increased ut the down swing phase and was $78.74{\pm}4.78^{\circ}$ on the moment of impact. 7. The angle of the right shoulder was decreased in the down swing phase and increased before the impact. and the angle was $51.28{\pm}3.54^{\circ}$ on the moment of impact.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.948-956
• /
• 2010

The purpose of this study was to test the effectiveness of a prototype KAFO (Knee-Ankle-Foot Orthosis) powered by two artificial pneumatic muscles during walking. We had previously built powered AFO (Ankle-Foot Orthosis) and KO (Knee Orthosis) and used it effectively in studies on assistance of plantaflexion and knee extension motion. Extending the previous study to a KAFO presented additional challenges related to the assistance of gait motion for rehabilitation training. Five healthy males were performed gait motion on treadmill wearing KAFO equipped with artificial pneumatic muscles to power ankle plantaflexion and knee extension. Subjects walked on treadmill at 1.5 km/h under four conditions without extensive practice: 1) without wearing KAFO, 2) wearing KAFO with artificial muscles turned off, 3) wearing KAFO powered only in plantaflexion under feedforward control, and 4) wearing KAFO powered both in plantaflexion and knee extension under feedforward control. We collected surface electromyography, foot pressure and kinematics of ankle and knee joint. The experimental result showed that a muscular strength of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be lower due to pneumatic assistance and foot pressure of wearing KAFO powered plnatarfexion and knee extension under feedforward control was measured to be greater due to power assistance. In the result of motion analysis, the ankle angle of powered KAFO in terminal stance phase was found a peak value toward plantaflexion and there were difference of maximum knee flexion range among condition 2, 3 and 4 in mid-swing phase. The current orthosis design provided plantaflexion torque of ankle jonit in terminal stance phase and knee extension torque of knee joint in mid-swing phase.

• Journal of Korea Game Society
• /
• v.13 no.2
• /
• pp.29-38
• /
• 2013

Recently there has been an increasing interest on tangible games in which human motions are recognized rather than the handling of keyboards and mouses. Such games require a motion controller for recognizing the motions of users. In this paper, we analyze the characteristics of values of accelerator sensors which are generated by a user who perform a tennis swing while holding a smartphone with his/her hand, and propose a method for motion recognition based on DWT(Discrete Wavelet Transform). The proposed method enables a smartphone to serve as a motion controller, so that a user can enjoy a tangible tennis game without eliminates a need for buying the device. We developed a tennis game prototype using the proposed method. To our experiment, our method showed a high recognition rate and the usefulness in the game.

• The Journal of Korean Physical Therapy
• /
• v.30 no.1
• /
• pp.14-22
• /
• 2018

Purpose: This study examined the effects of the lower limb alignment on the pelvis, hip, and knee kinematics in people with genu varum during stair walking. Methods: Forty subjects were enrolled in this study. People who had intercondylar distance ${\geq}4cm$ were classified in the genu varum group, and people who had intercondylar distance <4cm and intermalleolar distance <4cm were placed in the control group. 3D motion analysis was used to collect the pelvis, hip, and knee kinematic data while subjects were walking stairs with three steps. Results: During stair ascent, the genu varum group had decreased pelvic lateral tilt and hip adduction at the early stance phase and decreased pelvic lateral tilt at the swing phase compared to the control group. At the same time, they had decreased minimal hip adduction ROM at the early stance and decreased maximum pelvic lateral tilt ROM and minimum hip rotation ROM at the swing phase. During stair descent, the genu varum group had decreased pelvic lateral tilt at the early stance and decreased pelvic lateral tilt and pelvic rotation at the swing phase. In addition, they had decreased pelvic frontal ROM during single limb support and increased knee sagittal ROM during the whole gait cycle. Conclusion: This study suggests that a genu varum deformity could affect the pelvis, hip and knee kinematics. In addition, the biomechanical risk factors that could result in the articular impairments by the excessive loads from lower limb malalignment were identified.