• The Journal of Engineering Geology
• /
• v.2 no.2
• /
• pp.155-165
• /
• 1992

The purpose of this study is to evaluate compatability of seismic source characteristics of the Kern County earthquake to those of Korean Peninsula seismotectonics. The compatability could be used to make Korean type response spectrum from the strong ground motions observed from the assingned earthquake. The July 21, 1952, Kern County, California, earthquake is the largest earthquake to occur in the western U.S. since 1906, and the repeat of this event poses a significant seismic hazard. The Kern County event was a complex thrusting event, with a surface rupture pattern that varied from pure leftlateral strike-slip to pure dip-slip. A time dependent moment tensor inversion was applied to ten observed teleseismic long-period body waves to investigate the source complexity. Since a conventional moment tensor inversion(constant geometry through time) returns a non-double-couple source when the seismic source changes(fault orientation and direction of slip) with time, we are required to use the time dependent moment tensor which allows a first-order mapping of the geometric and temporal complexity. From the moment tensor inversion, a two-point seismic source model with significant overlap for the White Wolf fault, which propagates upward(20 km to 5 km) from SW to NE, fits most of the observed seismic waveforms in the least squares sense. Comparison of P, T and B axes of focal mechanisms and focal depths suggests that seismic source characteristics of the Kern County earthquake is consistant with those of Korean Peninsula Seismotectonics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1119-1124
• /
• 2012

In this paper I introduced a new methodology; Fuzzy-set Qualitative comparative analysis (fsQCA) calibration introduced by Charles C Ragin to measure the degree of technology innovation in OECD countries and non OECD countries and developed a simple technology development pattern based on patents number of traditional technology, information and communication technology and biotechnology which are published by OECD Working group. Through this typology and measurement of technology innovation degree, we can provide appropriate and necessary science and technology policies for each developed or developing country and technology sectors like information and communication technology.

• KIPS Transactions on Software and Data Engineering
• /
• v.6 no.7
• /
• pp.353-360
• /
• 2017

In this study, a software education program based on blended learning using scratch was designed for pre-service elementary teachers' software education. Software education program was applied to experimental group and control group within the university of education using Scratch programming for 12 weeks. Blended learning using online lectures was applied to experimental group. The pre-service teachers' recognition about software education and self-evaluation of computational thinking were performed. Then, we analyzed the effect of the developed education program on the recognition of software education and computational thinking. As a result, the level of post-recognition of software education in the experimental group was significantly higher than that of the pre-recognition. In the self-evaluation of computational thinking, the experimental group was significantly higher than the control group. Therefore, it can be seen that the software education program based on blended learning can help improve the learner's computational thinking.

• Journal of Microbiology and Biotechnology
• /
• v.10 no.4
• /
• pp.514-517
• /
• 2000

Abstracts Six shikonin metabolites were obtained from human intestinal bacteria, Bacteriodes fragilis subsp. thetaotus. following biotransformation. The transformation of shikonin (1) was performed anaerobically for 3 day at $37^{\circ}C$ in thc bacterial suspension of B. Fagilis which was cultured overnight in GAM broth. The incubation mixture \vas extracted with EtGAc Lo give a dark-brown residue. The residue was apphed to a silica gel column, which was eluted successively with hexane (Fr. A), $CHCl_3$ (Fr. B), and $CHCl_3$:MeOH (9:I) (Fr. C). Six metabolites. Fr.A (2 and 3), Fr. B (6 and 7), and Fr. C (4 and 5) were isolated by repeated silica gel column chromatography, preparatlVe TLC, followed by Sephadex LH-20. In vitro cytotoxicities were tested against human tumor cell lines; PC-3 (prostate), ACHN (renal), A549 (lung), SW620 (colon), KS62 (leukemia), and Du145 (prostate). The shikonin metabolites 2. 4, 5, and 6 showed weaker cytotoxicity than the parenL shikonin (1). whereas shikonin monomenc metabolite 3 ($ED_{50}{\;}O.44-{\;}1.22{\;}\mu\textrm{g}/ml$) and dimeric metabolite 7 ($ED_{50}{\;}O.48-{\;}2.35{\;}\mu\textrm{g}/ml$) exhibited stronger activities compared with adriamycin, which was used as the positive control.ontrol.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.2 s.332
• /
• pp.23-38
• /
• 2005

The state of channel between two or more wireless terminals is changed frequently due to noise or multiple environmental conditions in wireless network. In this paper, we analyze packet transmission time and queue length in a time-varying channel of packet based Wireless Networks. To reflect the feature of the time-varying channel, we model the channel as two-state Markov model and three-state Markov model Which are transformed to SFG(Signal Flow Graph) model, and then the distribution of the packet transmission can be modeled as Gaussian distribution. If the packet is arrived with Poisson distribution, then the packet transmission system is modeled as M/G/1. The average transmission time and the average queue length are analyzed in the time-varying channel, and are verified with some simulations.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.35S no.9
• /
• pp.9-18
• /
• 1998

A single RF transceiver chip for an extended GSM handset application was designedm, fabricated and evaluated. A RFIC was fabricated by using silicon BiCMOS process, and then packaged in 80 pin TQFP of $10 {\times} 10 mm^{2}$ in size. As a result, it was achieved guite reasonable integraty and good RF performance at the operation voltage of 3.3V. This paper describes development results of RF receiver section of the RFIC, which includes LNA, down conversion mixer, AGC, switched capacitor filter and down sampling mixer. The test results show that RF receiver section is well operated within frequency range of 925 ~960 MHz, which is defined on the extended GSM specification (E-GSM). The receiver section also reveals moderate power consumption of 67 mA and minimum detectable signal of -105 dBm.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.9
• /
• pp.71-78
• /
• 2008

In this paper, we implement the H.264/AVC baseline decoder by hardware-software partitioning under the embedded Linux Kernel 2.4.26 and the FPGA-based target board with ARM926EJ-S core. We design several IPs for the time-demanding blocks, such as motion compensation, deblocking filter, and YUV-to-RGB and they are communicated with the host through the AMBA bus protocol. We also try to minimize the number of memory accesses between IPs and the reference software (JM 11.0) which is ported in the embedded Linux. The proposed IPs and the system have been designed and verified in several stages. The proposed system decodes the QCIF sample video at 2 frame per second when 24MHz of system clock is running and we expect the bitter performance if the proposed system is designed with ASIC.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.45-52
• /
• 2017

This paper presents a high-performance software-hardware dehazing system based on a dedicated hardware accelerator for the haze removal. In the proposed system, the dedicated hardware accelerator performs the dark-channel-prior-based dehazing process, and the software performs the other control processes. For this purpose, the dehazing process is realized as an OpenCL kernel by finding the inherent parallelism in the algorithm and is synthesized into a hardware by employing a high-level-synthesis technique. The proposed system executes the dehazing process much faster than the previous software-only dehazing system: the performance improvement is up to 96.3% in terms of the execution time.

• Journal of Broadcast Engineering
• /
• v.25 no.3
• /
• pp.338-345
• /
• 2020

Versatile Video Coding (VVC), which has been developing as a next generation video coding standard, has adopted various techniques to achieve more than twice the compression performance of HEVC (High Efficiency Video Coding). The recently released VVC Test Model (VTM) shows 38% Bjontegaard Delta bitrate (BD-rate) improvement and 9x/1.6x encoding/decoding complexity over HEVC. In order to reduce such increased complexity, various fast algorithms have been proposed. In this paper, gradient-based methods of fast intra mode decision and block splitting are presented. Experimental results show that, compared to VTM6.0, the proposed method gives up to 65% encoding time reduction with 3.54% BD-rate loss in All-Intra (AI) configuration.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.44 no.5
• /
• pp.12-19
• /
• 2007

This paper presents an ASIP(Application Specific Instruction Set Processor) for implementation of H.264/AVC, called VSIP(Video Specific Instruction-set Processor). The proposed VSIP has novel instructions and optimized hardware architectures for specific applications, such as intra prediction, in-loop deblocking filter, integer transform, etc. Moreover, VSIP has hardware accelerators for computation intensive parts in video signal processing, such as inter prediction and entropy coding. The VSIP has much smaller area and can dramatically reduce the number of memory access compared with commercial DSP chips, which result in low power consumption. The proposed VSIP can efficiently perform in real-time video processing and it can support various profiles and standards.