• Proceedings of the KIEE Conference
• /
• 1992.07b
• /
• pp.775-778
• /
• 1992

In 1980, 154kV OF cable was installed at the Cheong-Pyeong pumped-storage power station. Effective head of this pumped-storage station is 250m between upper and lower re-servior and length of cable route is 750m. However, several failures have happened owing to steep slope during the operation. 154 kV XLPE cable was applied for this power station to eliminate a lack of stability on account of steep slope and successfully installed in 1991. Meanwhile, installation procedure brings about many problem to be solved. In this paper, we describe the counter measure of cable sliding phenomena caused by heat shrinkage as well as the method of installation of cable under the steep slope condition. And hereafter, we think this paper will be a good reference to design and installation of 154kV XLPE cables in steep slope turnnel at urban areas.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.12
• /
• pp.1603-1611
• /
• 2009

High-cell-density cultivation of yeast was investigated using the agricultural waste products corn steep liquor (CSL) and molasses. The Saccharomyces cerevisiae KV-25 cell mass was significantly dependent on the ratio between C and N sources. The concentrations of molasses and CSL in the culture medium were statistically optimized at 10.25% (v/v) and 16.87% (v/v), respectively, by response surface methodology (RSM). Batch culture in a 5-l stirred tank reactor using the optimized medium resulted in a cell mass production of 36.5 g/l. In the fed-batch culture, the feed phase was preceded by a batch phase using the optimized medium, and a very high dried-cell-mass yield of 187.63 g/l was successfully attained by feeding a mixture of 20% (v/v) molasses and 80% (v/v) CSL at a rate of 22 ml/h. In this system, the production of cell mass depended mainly on the agitation speed, the composition of the feed medium, and the glucose level in the medium, but only slightly on the aeration rate.

• Bulletin of the Korean Mathematical Society
• /
• v.52 no.2
• /
• pp.661-677
• /
• 2015

In this paper, we consider the following Kirchhoff-type Schr$\ddot{o}$dinger system $$\{-\(a_1+b_1{\int}_{\mathbb{R^3}}{\mid}{\nabla}u{\mid}^2dx\){\Delta}u+{\gamma}V(x)u=\frac{2{\alpha}}{{\alpha}+{\beta}}{\mid}u{\mid}^{\alpha-2}u{\mid}v{\mid}^{\beta}\;in\;\mathbb{R}^3,\\-\(a_2+b_2{\int}_{\mathbb{R^3}}{\mid}{\nabla}v{\mid}^2dx\){\Delta}v+{\gamma}W(x)v=\frac{2{\beta}}{{\alpha}+{\beta}}{\mid}u{\mid}^{\alpha}{\mid}v{\mid}^{\beta-2}v\;in\;\mathbb{R}^3,\\u,v{\in}H^1(\mathbb{R}^3),$$ where $a_i$ and $b_i$ are positive constants for i = 1, 2, ${\gamma}$ > 0 is a parameter, V (x) and W(x) are nonnegative continuous potential functions. By applying the Nehari manifold method and the concentration-compactness principle, we obtain the existence and concentration of ground state solutions when the parameter ${\gamma}$ is sufficiently large.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.5
• /
• pp.165-170
• /
• 2003

This paper presents development of solid core suspension disc insulators (cap and cap suspension disc insulator) for replacing cap and pin suspension disc insulators in overhead transmission and distribution lines which expose to lightning discharges. By this means the punctured problem caused by steep front surge voltage created by lightning discharge on the lines can be solved. The solid core suspension insulator was designed and constructed based on the dimensions of conventional suspension disc insulators (cap and pin insulators). The insulators are made of alumina porcelain. The electrical and mechanical characteristics of the solid core suspension insulators were carried out. The puncture test was performed in the air by applying steep front impulse voltage with amplitude about 2.5 per unit of 50% flashover (CFO) of the insulator unit at negative standard lightning impulse $1.2/50\;\mu\textrm{s}$ with steepness up to $9200\;kV/\mu\textrm{s}$. The testing results show that solid core suspension disc insulators are not punctured eventhough the steepness of the steep front impulse voltage was increased up to $9200\;kV/\mu\textrm{s}$.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.372-375
• /
• 2000

Lactobacillus cristatus KLB 46 isolated from Korean woman was grown on supplemented whey medium and medium compositions were optimized for maximum viable cell count. Among the nitrogen sources tested, beef extract yielded the highest viable cell number. When corn steep liquor was applied as an additional nitrogen source, the viable cell number was highest $(3.11{\times}10^9\;CFU/ml)$ in the medium containing 50g/ l corn steep liquor and 10g/ l beef extract. The highest viable cell $count(5.00{\times}10^9\;CFU/ml)$ was obtained from the supplemented whey medium that contains beef extract(10g/ l ), corn steep liquor(50g/ l ), tween 80(0.1%, v/v) and trace amounts of sodium acetate(5g/ l ), dipotassium phosphate(2g/ l ), magnesium sulfate(0.1g/ l ), and manganese sulfate (0.05g/ l ).

• Journal of the Korean GEO-environmental Society
• /
• v.15 no.9
• /
• pp.77-85
• /
• 2014

Recently, the National Emergency Management Agency of Korea has been operating the National Disaster Management System. Nevertheless, there are numerous difficulties in systematic controlling the steep slope DB promptly, because the system's functions in input and control for steep slope information are merely simple. Futhermore, the hazard degrees of steep slope lands nowadays have risen suddenly in accordance with the increase rate of large scale landslides such as the landslide cases of Umyeonmountain, Chuncheon province and others or sever rain storm cases. these lead to rapid increases in frequencies of nature disasters nationally. therefore, it is needed to develop the GIS-based integrated management system for steep slope information in order to manage disasters in advance or high-degree control. This study shows the national GIS-based integrated management system to prevent the disasters that caused by steep slope lands. The integrated management system developed in this study consists of surface information input modules, realtime DB liaison modules of integrated underground information, V-world background map-based GIS, integrated management system for steep slope information user modules, realtime liaison interface modules designed for utilizing steep slope information. Also, tests about stability of data storage, system stability and consistency of processing speed were performed.

• The Journal of the Korea Contents Association
• /
• v.20 no.6
• /
• pp.230-240
• /
• 2020

Recently, the social debate about the fourth industrial revolution has been actively developed, and it is predicted that the 4th Industrial Revolution will have a great influence on our society, cities, residential and industrial spaces. Especially, it is anticipated that the technological development of the 4th Industrial Revolution will cause a wide range of changes in residential style and culture. Therefore, it is necessary to grasp the direction of future change in advance and proactively respond to future tasks and strategies need. The purpose of this study is to predict the direction and characteristics of the mid - to long - term changes in future housing that will be brought about by the 4th Industrial Revolution and to define future social, spatial and technological impacts and issues and to find policy measures for them. STEEP (V) as a methodology for forecasting future has been used. It is a process of deriving technical and social issues by using Big Data. It collects various keywords and draws out key issues and summarizes social change patterns related to each core issue. The proposed strategy for future housing prediction and countermeasures can be used as a basic data for future directions of housing policy and suggests a process for deriving reasonable and reasonable results from multiple data sets rather than accurate prediction.

• Food Science and Biotechnology
• /
• v.14 no.5
• /
• pp.561-565
• /
• 2005

In this study, we attempted to assess the effects of lactate and com steep liquor (CSL) on the production of bacterial cellulose (BC) by Gluconacetobacter persimmonis $KJ145^T$. The optimal condition for the production of BC was a lactate concentration of 1% (w/v) and a CSL concentration of 10% (w/v). Under these optimal conditions, 6 days of fermentation produced 6.90 g/L of BC. Both the BC production yield and cell growth increased continuously until the 20th day of fermentation, by which time 17.0 g/L had been produced. In a static culture trial, in which plastic containers were used as fermentation chambers for 6 days of fermentation, the BC production yield in the group initially cultured with 500 mL medium was higher than that of the 750 and 1000 mL media. In addition, the texture of the BC was examined according to its post-treatment in order to determine conditions for optimal textural characteristics. The strength, hardness, and other characteristics of the BC were negatively correlated with sucrose concentration, but were largely positively correlated with NaCl concentration. With regards to the effect of pH on textural change, BC strength and hardness were elevated at pH 2 and 8 but reduced at pH 4 and 6, indicating that the texture of the BC is extremely sensitive to treatment conditions.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.374-377
• /
• 2003

We reported researches of possibility of the usage of known electrooptical effects (EOE) for diffractive displays (DLCD). We found different EOEs provide the possibility of broad selection of steepness of volt-contrast characteristics at rather large steep of modulation without the usage polarizes. The data are represented much promising for broad development DLCDs.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.17 no.2
• /
• pp.216-222
• /
• 2017

The most prominent challenge for MOSFET scaling is to reduce power consumption; however, the supply voltage ($V_{DD}$) cannot be scaled down because of the carrier injection mechanism. To overcome this limit, a new type of field-effect transistor using positive feedback as a carrier injection mechanism (FBFET) has been proposed. In this study we have investigated the electrical characteristics of a $Si_{1-x}Ge_x$ FBFET with one gate and one-sided $Si_3N_4$ spacer using TCAD simulations. To reduce the drain bias dependency, $Si_{1-x}Ge_x$ was introduced as a low-bandgap material, and the minimum subthreshold swing was obtained as 2.87 mV/dec. This result suggests that a $Si_{1-x}Ge_x$ FBFET is a promising candidate for future low-power devices.