• Journal of Korea Multimedia Society
• /
• v.24 no.2
• /
• pp.199-207
• /
• 2021

It is very important to support real-time on the inspection equipment based on Windows. In particular, in the system using MIL-STD-1553B communication, which is widely used in military weapon systems, real-time is required for inspection equipment that uses mostly platforms based on Windows such as Industrial PCs. However, in order to use a complete real-time operating system such as VxWorks, the purchase cost is expensive and the implementation is complicated on the system, so it is not suitable for inspection equipment that requires simple functions to just check go or no-go. Therefore, in this paper, a Real-Time implanted Kernel(RTiK) in the Windows kernel is implanted in order to improve these defects, and real-time performance is implemented for periodically MIL-STD-1553B communication by Deferred Procedure Call(DPC) of Windows. Also, it was verified that the period of up to 2ms was guaranteed with a RDTSC into the EDX:EAX registers for measuring the periodicity.

• Korean Journal of Metals and Materials
• /
• v.47 no.10
• /
• pp.667-674
• /
• 2009

High temperature wear of STD 61 tool steels sliding against the Al-9%Si coated steels used for hot press forming has been studied in comparison with that of the tool steels sliding against the uncoated steels. Wear tests have been performed using a pin-on-disc configuration under an applied normal load of 50N for 20 min with heating the coated and uncoated steels up to 800$^{\circ}C$. It was found on the worn surface of the STD 61 tool steels sliding against the Al-9%Si coated steels that the formation of the glazed layers containing Al transferred from the coated tribopair may contribute to a reduction of the coefficient of friction, and detachment in part occur due to delamination wear, resulting in higher specific wear rate. On the other hand the Fe-oxide wear debris entrapped on the softer surface of the uncoated steels can act as a tribosurface, leading to decreased adhesive wear of the STD 61 tool steels, resulting in a lower specific wear rate.

• Korean Journal of Materials Research
• /
• v.32 no.3
• /
• pp.139-145
• /
• 2022

Reheat treatment process of mold is necessary when partial machining of the mold is required, such as shape correction for an existing mold. If defects such as cracks or significant deterioration of mechanical properties of the mold occur during reheat treatment, it is impossible to reuse the mold. In this study, reheat treatment was performed up to two times for STD11 tool steel, and microstructure and mechanical properties according to the reheat treatment were evaluated. Carbide fraction and grain size of prior austenite were almost unchanged after the reheat treatment. Hardness and impact toughness increased significantly after QT treatment, and these properties were maintained without significant change even after the reheat treatment. It is concluded that up to two iterations of reheat treatment does not cause deterioration of properties of STD11 tool steel. Based on these results, a mold for a face-lifted front bumper was manufactured through machining and reheat-treating of an existing mold.

• 한국데이터정보과학회:학술대회논문집
• /
• 2003.10a
• /
• pp.171-176
• /
• 2003

전기 설비의 가속 수명시험에서 절연재료의 열 수명 시험자료에 대한 통계적 분석지침으로 1987년 ANSI/IEEE Std. 101이 제정된 이래, 많은 실험의 결과 분석에 이용되어져 오고 있다. 그러나, ANSI/IEEE Std. 101 에서는 제한된 환경 하에서 얻어지는 소수의 자료를 분석에 이용하고 있어, 분석 결과의 정확성에 의문이 제기되고 있다. 본 논문에서는, ANSI/IEEE Std. 101에서 사용한 자료에서 얻은 통계량들을 근거로 Monte Carlo Simulation을 실시하여 분석지침에서 제시한 결과와 비교하여 보았다.

• Proceedings of the KIPE Conference
• /
• 2010.07a
• /
• pp.301-302
• /
• 2010

본 논문에서는 계통과 연계된 분산전원시스템에 있어 계통 연계형 태양광 발전 시스템의 주요한 요구사항에 해당되는 IEEE Std 1547/1547.1의 시험 사양 및 기술 사양에 대하여 기술하기로 한다. 당사인 KACO new energy에서는 이 인증을 통해서 기술적인 진보와 제품 안전의 우위성을 확보 하였고 부가적으로 미국과 캐나다 시장 진출에 대한 교두보를 마련하였다. 인증을 받은 XP100U 시리즈 자료의 일부분을 바탕으로 시험의 중요성 및 필요성에 대한 그 타당성을 입증한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.459-462
• /
• 2003

선박에 탑재되는 기기나 장비는 선박으로부터 받게 되는 진동환경에서 성능이 지속적으로 유지되어야 하므로 이에 대한 내구성능이 요구된다. 일찍이 미국 해군에서는 함정 탑재기기의 환경진동시험에 관하여 MIL-STD-167-1$^{(3)}$ 에 규정하고 이에 따라 환경진동에 대한 내구성능 입증을 요구하고 있다. 우리나라 해군도 이 표준을 그대로 적용하여 시행하고 있다. 반면에, 일반선박의 경우에는 함정에서와 같이 엄격하게 탑재기기의 진동 내구성능시험을 요구/시행되고 있지 않다. 1996년에 국제표준화기구(중략)

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.10 no.16
• /
• pp.27-38
• /
• 1987

This paper develops a standard time table using STD(Standard Tine Data) Technique in multi-product and one-unit production systems. STD leads to greater consistency between similar jobs. The constant-time and special elements will always be the same even though they pertain to different part numbers. Actually, the standards will very based on the size of the variable elements that are in control of the time. A real-field example is presented.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2011.05a
• /
• pp.103-103
• /
• 2011

본 연구에서는 TiN/ZrN 복합층을 STD 61 공구강 표면에 마그네트론 스퍼터링 (magnetron sputtering) 방법을 이용하여, 표면온도, 스퍼터링 파워, 시간, 버퍼층의 두께에 따른 변수를 두어 실험하였다. 표면 특성을 알아보기 위해 OM, FE-SEM, AFM, EDS, XRD, XRR 그리고, 긋기 및 나노경도 시험을 시행하였다.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.226-235
• /
• 2016

The yield of 3D stacked IC manufacturing improves with the pre-bond integrity testing of through silicon vias (TSVs). In this paper, an efficient pre-bond test method is presented based on IEEE std. 1500, which can precisely diagnose any happening of TSV defects. The IEEE std. 1500 wrapper cells are augmented for the proposed method. The pre-bond TSV test can be performed by adjusting the driving strength of TSV drivers and the test clock frequency. The experimental results show the advantages of the proposed approach.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.214-217
• /
• 2005

To improve the safety of facilities and human beings when the ground fault occurs, public power utility prescribes the reasonable ground resistances, measures and controls the ground resistance of all the ground electrodes biennially. Concerning the safety of human, there are two safety criteria widely accepted, i.e. the IEEE Std 80-2000 and the IEC 479-1:1994. The IEEE Std 80-2000 is based on a simplified electric shock model usually translated into permissible touch and step voltages. The IEC 479-1:1994 is less specific than IEEE Std 80-2000 for analysis purpose. The IEC 479-1:1994 provides values of permissible body current against electric shock duration. This paper provides a technical study of these two standards to analyze the safety of human beings of ground electrodes developed recently for distribution power system.