• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.10b
• /
• pp.99-100
• /
• 2002

Radial, tilting-pad proceeding bearings are applied in high speed rotating machines operating at stable small and mean loads and the peripheral speeds of proceeding reaching 150 m/s. The operation of bearing can be determined by static characteristics including the oil film pressure, temperature and viscosity distributions, minimum oil film thickness, load capacity, power loss, oil flow. The operation of 5-lobe tilted-pad proceeding bearing has been introduced at the assumption of adiabatic oil film. The oil film pressure, temperature and viscosity distributions habe received by iterative solution of the Reynolds', energy and viscosity equations. The resulting oil film force, minimum oil film thickness, power loss. oil flow, maximum oil film pressure, maximum temperature were computed for different sets of bearing geometric parameters as: bearing length to diameter ratio, pad angular length and width as well as pad relative clearance.

• Physical Therapy Korea
• /
• v.3 no.3
• /
• pp.1-11
• /
• 1996

The purpose of this study were to evaluate and compare the balance ability at different conditions in normal 20 to 29 years old on unstable platform, KAT 2000(Breg, Inc., Vista, CA. 1994). Static and dynamic BI(balance index) were measured 3psi and 5psi surface conditions. Static tests were done on right and left leg separately, then both legs together with the feet apart 20cm with the eyes opened and closed. Dynamic tests were done on both legs together with apart 20cm with the eyes opened. A dynamic test was performed in which the subject moved platform in a circular manner to chase a moving object on a computer screen. Seventy healthy students(average 21.6 years, male, female) were tested. In this study applied the paired t-test and correlation to determine the statistical significance of result. The results were as follow: 1) The mean static balance index of the Rt leg was $119.9{\pm}75.72$ on 3psi surface condition with the eyes opened, and that of the Lt leg was $224.3{\pm}121.16$. 2) The mean static balance index of the Rt leg was $93.1{\pm}24.16$ on 5psi surface condition with the eyes opened, and that of the Lt leg was $180.5{\pm}61.76$. 3) The mean static and dynamic balance index of both legs were $76.4{\pm}31.86$, $2187.6{\pm}696.99$ on 3psi with the eyes opened, and $68.3{\pm}14.82$, $1938.7{\pm}525.41$ on 5psi respectively. 4) The mean static balance index of the Rt leg was $517.8{\pm}220.87$ on 3psi surface condition with the eyes closed, and that of the Lt leg was $588.6{\pm}204.81$. 5) The mean static balance index of the Rt leg was $271.9{\pm}192.151$ on 5psi surface condition with the eyes closed, and that of the Lt leg was $363.4{\pm}98.97$. 6) The mean static balance index of both legs was $332.6{\pm}137.31$ on 3psi surface condition with the eyes closed, and that of the 5psi was $288.5{\pm}133.07$. 7) The balance index on 3psi surface condition was significantly higher than that of 5psi (p<0.05, p<0.01). 8) The balance index with the eyes closed was significantly higher than that of the eyes opened (p<0.05). 9) The balance index on the left leg was significantly higher than that of the right leg (p<0.05, p<0.01). 10) There was no correlation between static balance index and dynamic balance index. 11) Therewas no correlation between weight or height and balance index.

• International Journal of Aeronautical and Space Sciences
• /
• v.14 no.1
• /
• pp.99-104
• /
• 2013

Configuration design, analysis, and wind tunnel test of a vane-type multi-function air data probe (MFP) was described. First, numerical analysis was conducted for the initial configuration of the MFP in order to investigate aerodynamic characteristics. Then, the design was modified to improve static and dynamic stability for better response characteristics. The modified configuration design was verified through wind tunnel tests. The test results are also used to verify the accuracy of the analytical method. The analytically estimated aerodynamic damping provided by the Navier-Stokes equation solver correlated well with the wind tunnel test results. According to the calculation, the damping coefficient estimated from ramp motion analysis yielded a better correlation with the wind tunnel test than pitch oscillation analysis.

• Korean Journal of Hydrosciences
• /
• v.6
• /
• pp.99-105
• /
• 1995

External forecs acting on a pipe bend change when a transient pressure wave propagates through the bend. Analytical expressions are derived to compute the changes of these forces which depend mainly on static pressure rather than fluid momentum. This analysis reveals that the change of the vertical component of the force acting on a pipe bend with an angle larger than 90 may reverse in direction during the passage of a pressure wave through the bend.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1989.11a
• /
• pp.94-99
• /
• 1989

This paper analyzes file stiffness, damping coefficient, friction force and flow coefficient of externally pressurized oil journal beating, including the effect of journal rotation according to the Sommerfeld number. This paper assumed that the oil in the whole pocket has constant pressure, and that the oil in the whole bearing region has constant viscosity, temperature and density. Reynolds equation is derived from Nuvier - Stokes equation and continuity equation. And solved bearing pressure by ADI method for whole bearing region and fitted with out flow rate of pocket region. The model for numerical simulation is hydro - static oil journal bearing for high-speed, high-accuracy lathe spindle.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.7
• /
• pp.99-110
• /
• 1996

In this paper, the analysis o fthe electric field distribution for TEM cell which is matched iwth 50 is performed, and the relations of variables for characteristic impedance are derived. Quasi-static approximations are used to calculate the fiedl strength of the internal field of TEM cell. The results of the improved method for analysis of the electric field is compared with that of R.J. Spigel. and the improved method for characteristic impedance and the results of numerical analysis are shown.

• Journal of the Korean Institute of Navigation
• /
• v.20 no.4
• /
• pp.99-109
• /
• 1996

Though median filter is used for removing noise and smoothing image. But, the result of it has distortion around edge. And then, this paper proposes new noise removing algorithm by recursive morphological processing. Basic operation is same each other, but there is some different processing method between recursive morphology and general morphology theory. This recursive morphological filter can be viewed as the weighted order static filter, and then it has a weighted SE(structuring element). Especially using this algorithm to remove the 10% gaussian noise, this paper confirmed that PSNR is improved about 0.642~1.5757 db reserving edge well better than the results of the traditional median filter.

• Journal of Korean Ophthalmic Optics Society
• /
• v.20 no.3
• /
• pp.385-390
• /
• 2015

Purpose: This study evaluated the static stereoacuity by Distance Randot Stereotest (STEREO OPTICAL. Co., Inc. USA) and the dynamic stereoacuity by three-rods test (iNT, Korea). Criterion and correlation of stereoacuity between both tests and usefulness of two stereotest methods were also evaluated. Methods: For normal adults of 109 (male 61, female 48), mean age of 20.88 (19-32 years) years old, static stereoacuity by using Distance Randot Stereotest at 3 m distance, dynamic stereoacuity by using three-rods test at 2.5 m distance were measured. Results: The mean of distance static stereoacuity was $155.77{\pm}133.11sec$ of arc and the mean of error distance dynamic stereoacuity $11.13{\pm}9.69mm$. With equivalent-conversion stereoacuity of $23.44{\pm}20.96sec$ of arc, there was statistically significant differences (p=0.00) between two dynamic stereoacuity, but correlation was relatively low (${\rho}=0.226$). In the case of dynamic stereoacuity, separated to normal range by criterion of the error distance 20 mm, it showed the error distance of less than 20 mm in 97 subjects(89%) whose average of error distance and conversion mean dynamic stereoacuity were $8.43{\pm}5.10mm$ and $17.68{\pm}10.67sec$ of arc. repectively. The error distance of was equivalent-conversion dynamic stereoacuity 40.99 sec of arc (PD 62 mm basis) was 20 mm. Conclusions: The results of lower correlation between static and dynamic stereoacuity suggest that seterotest should be applied separately to different functions. The results of this study also suggest that Distance Randot Stereotest can be applied to static stereoacuity excluding monocular cues. Three-rods test can be applied to dynamic stereoacuity containing the response of the eye-hand coordination in the daily life of natural vision condition, including the monocular cues. These different approaches canprovide a criterion of the two stereoacuity and parallel use of the two tests would be useful. For dynamic stereoacuity by three-rods test, error distance 20 mm in a normal range of adults can be used as a criteria to get statistical meaning of the results.

• KIISE Transactions on Computing Practices
• /
• v.24 no.2
• /
• pp.99-104
• /
• 2018

Recently, there are increasing damages by ransomware in the world. Ransomware is a malicious software that infects computer systems and restricts user's access to them by locking the system or encrypting user's files saved in the hard drive. Victims are forced to pay the 'ransom' to recover from the damage and regain access to their personal files. Strong countermeasure is needed due to the extremely vicious way of attack with enormous damage. Malware analysis method can be divided into two approaches: static analysis and dynamic analysis. Recent malwares are usually equipped with elaborate packing techniques which are main obstacles for static analysis of malware. Therefore, this paper suggests a dynamic analysis method to monitor activities of ransomware. The proposed method can analyze ransomwares more accurately. The suggested method is comprised of extracting signatures of benign program, malware, and ransomware, and selecting the most appropriate signatures for ransomware detection.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.3
• /
• pp.99-106
• /
• 2020

Selective laser melting (SLM) is an additive manufacturing process by melting metallic powders and stacking into layers, and can product complex shapes or near-net-shape (NNS) that are difficult to product by conventional processes. Also, SLM process is able to raise the efficiency of production by creating a streamlined manufacturing process. For manufacturing in SLM process using Ti-6Al-4V powder, analysis of microstructural evolution and evaluation of mechanical properties are essential because of rapid melting and solidification process of powders according to high laser power and rapid scan speed. In addition, it requires a post-processing because the soundness and mechanical properties are degraded by defects such as pore, un-melted powder, lack-of-fusion, etc. In this study, hot isostatic press (HIP) was conducted as a post-processing on SLM-printed Ti-6Al-4V alloy. Microstructure of post-processed Ti-6Al-4V alloy was compared to as-built Ti-6Al-4V, and the evolution of quasi-static (Vickers hardness, room temperature tensile characteristic) and dynamic (high-cycle fatigue characteristic) mechanical properties were analyzed.