• Korean Journal of Forensic Psychology
• /
• v.13 no.2
• /
• pp.99-119
• /
• 2022

Research on sex offense has shown that sex offenders are very heterogeneous. Sex offenders are heterogeneous in their probability of risk of recidivism. Some sex offenders are known to be much higher in their tendencies to reactivate than others. The study examined the predictive and explanatory power of static and dynamic risk factors in STATIC-99 and HAGSOR-Dynamic which have been used in Korean correctional facilities since 2014. STATIC-99 and HAGSOR-Dynamic showed moderate predictive accuracy for all crimes(AUC = .737, AUC = .597, respectively, ps < .001). However, when examining sex crime alone, only STATIC-99 predicted recidivism significantly(AUC = .743, p < .001). The incremental predictive power of HAGSOR-Dynamic was confirmed; the explanatory power of Model 2 comprising both static and dynamic risk factors were significant beyond Model 1 comprising only static factors(∆χ²= 12.721, p < .001), but this tendency was only applied to the model of all crimes. These findings were discussed with implications of practicing the sex offender assessment and treatment.

• The Korean Journal of Nuclear Medicine
• /
• v.35 no.1
• /
• pp.43-51
• /
• 2001

Purpose: In this study, we compared the quantitative characteristics of dynamic salivary gland scintigraphy with static scintigraphy in patients with clinical sicca syndrome using Tc-99m pertechnetate. Materials and Methods: Fifty-two parotid glands and 52 submandibular glands out of 26 patients with clinical sicca syndrome were studied by dynamic and static salivary gland scintigraphy. Ten normal volunteers were also studied as a control group for comparison of scintigraphic parameters. Ten minutes after injection of 370 MBq Tc-99m pertechnetate, we obtained pre-stimulus static images for a few minutes. Then dynamic salivary gland scintigraphy with lemon juice stimulation was performed for 20 minutes. Finally we obtained post-stimulus static images after dynamic images. On dynamic study, functional parameters such as uptake rate, secretion rate and re-uptake rate were calculated. The results of dynamic study and static images were compared. Results: On dynamic study, we could obtain functional parameters of salivary glands successfully. On dynamic study, 22 parotid glands and 22 submandibular glands out of each of 52 glands are abnormal. The static images demonstrated somewhat different results, of which reasons we could assume via dynamic study. Conclusion: Dynamic salivary gland scintigraphy using Tc-99m perechnetate were more functional than static images and might be useful in the assessment of the functional change of the salivary gland in patients with clinical sicca syndrome.

• 한국기계연구소 소보
• /
• s.17
• /
• pp.99-109
• /
• 1987

Mechanisms with fully elastic members must consider both inertial forces due to the rigid motion of mechanisms and due to the elastic vibration of links. The main objectives of the kineto-elasto static and dynamic analyses are to calculate the quasi-static and the time-domain responses, respectively. An iterative transfer matrix method is used for a four-bar, fully elastic linked mechanism. Houbolt direct integration scheme is incorporated for the inertial effects due to the elastic link vibration. The analytical results are compared with the experimental responses and both responses show in good agreement.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.94-99
• /
• 1998

Generally not only the radial load but also the moment may be applied to the ball bearings for a shaft system. However it has been difficult to determine the static equivalent load because there is the radial static equivalent equation only for the axial and radial force on the bearings. In this paper, the same static equivalent radial load which makes the maximum contact force at the interface between the ball and groove as the applied radial force and moment generate is calculated under the condition that the radial force and the moment are applied to the bearings simultaneously. The relation between the static equivalent load and applied force is studied. Therefore the simple and effective equation for the static equivalent radial load of the radial load and moment is proposed for the deep groove ball bearings.

• Journal of Ocean Engineering and Technology
• /
• v.10 no.1
• /
• pp.92-99
• /
• 1996

Longline type aquaculture facilities are being used for scallpop culture in 30 m of water 2.5 km off the coast of Joomoonjin, Kangwon-do. In this paper, the facilities are modeled by the cabele-buoy-weight system, subject to the nonlinear behaviors of the mooring lines and the effects of current. Its static configuration is shown as a solution of 3-D nonlinear static equation and Runge-Kutta $4^{th}$ method is employed.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.11a
• /
• pp.192-193
• /
• 2013

The purpose of this research is to comprehend experimentally the nature of human static load to wall for making use of the result as basic data to evaluate resisting force of lightweight wall. Human motions exerting static load are classified to 4 types, and two-hands pushing and shoulder pushing are defined as the instantaneously forcing motions with hands or shoulder put on the load plate, respectively. Back leaning and one-hand leaning are defined as motions of taking a rest in their respective comfortable posture. Measurement of static horizontal load caused by each motion showed that the highest load ratio depends on hardness of load plane and was 1.17~1.25 times of weight in two-hands pushing, 0.95~0.99 times in shoulder pushing, 0.16~0.18 times in back leaning, and 0.12~0.15 times in one-hand leaning.

• Journal of Korea Game Society
• /
• v.15 no.5
• /
• pp.99-108
• /
• 2015

To identify the location of the object and improve the realism in 3D game, shadow mapping is widely used to compute the depth values of vertices in view of the light position. Since the depth value of the shadow map is calculated by the world coordinate, the depth values of the static object don't need to be updated. In this paper, (1) in order to improve the rendering speed, using multiple render targets the depth values of static objects stored only once are separated from those of dynamic objects stored each time. And (2) in order to improve the shadow quality in the quarter view 3D game, the position of the light is located close to dynamic objects traveled along the camera each time. The effectiveness of the proposed method is verified by the experiments according to the different static and dynamics object configuration in 3D game.

• Journal of IKEEE
• /
• v.23 no.1
• /
• pp.99-106
• /
• 2019

This paper propose a new form of UPQC (Unified Power Quality Compensator) to compensate the current and voltage quality problems of nonlinear loads. The conventional UPQC system consists of a series inverter, a parallel inverter, and a common DC link. A new type of UPQC proposed is a parallel compensator with SVC (Static Var Compensator) added to compensate for the wide compensation range and low DC link voltage. The parallel inverter compensates the reactive power generated by the nonlinear load, and the series inverter compensates the sag and swell generated at the power supply side.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.289-294
• /
• 2011

The purpose of this paper is to validate energy absorbing capacity that satisfies APTA SS-C&S-034-99, REV.2 with North America type Electric Multiple Units. The FE models for collision and corner post simulation were developed. Two type of simulation were conducted. One is quasi-static analysis for collision post and the other is quasi-static analysis for corner post. And the energy absorption capacity of the analytical model was verified.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.4
• /
• pp.99-107
• /
• 2000

In this study, a static and dynamic characteristics analysis system for machine tool spindle systems with 3 lobe sliding bearing is developed based on Timoshenko theory, finite element method and windows programming techniques. And the characteristics value of 3 lobe sliding bearing such as eccentricity ratio, attitude angle, friction coefficient , stiffness coefficients, damping coefficients and so on, are determined by using the thermal equilibrium conditions of spindle systems. Since the developed system has various analysis modules related to static deformation analysis, modal analysis, frequency responses analysis and so on, it can be utilized to perform systematically the design an devaluation process of spindle systems with 3 lobe sliding bearing under windows GUI environment.