• Journal of Microbiology and Biotechnology
• /
• v.16 no.8
• /
• pp.1216-1221
• /
• 2006

A protein array was fabricated for a miniaturized immunoassay using microcontact printing ($\mu$CP). A polydimethylsiloxane (PDMS) stamp with a 5 $\mu$m$\times$5 /$\mu$m dimension was molded from a silicon master developed by photolithography. Under optimal fabrication conditions, including the baking, incubation, and exposure time, a silicon master was successfully fabricated with a definite aspect ratio. An antibody fragment was utilized as the ink for the $\mu$CP, and transferred to an Au substrate because of the Au-thiol (-SH) interaction. The immobilization and antibody-antigen interaction were investigated with fluorescence microscopy. When human serum albumin (HSA) was applied to the protein array fabricated with an antibody against HSA, the detection limit was 100 pg/ml of HSA when using a secondary antibody labeled with a fluorescence tag. The fabricated protein array maintained its activity for 14 days.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.19 no.2
• /
• pp.130-138
• /
• 2006

We have investigated pattern scaling down of silicon stamps through the oxidation technique, During oxidizing the silicon stamps, silicon dioxide that has 300 nm and 500 nm thickness was grown, and critical deformations were not observed in the patterns. There was positive effect to reduce size of patterns because vertical and horizontal patterns have different orientation. We achieved pattern reduction rate of $26\%$. In addition, the formation of polymer patterns had been investigated with varied temperature and pressure conditions to improve the filling characteristics of polymers during nanoimprint lithography when pattern sizes were few micrometers. In these varied conditions, polymers had been affected by free space compensation and elastic stress relaxation for filling the cavities. Based on the results, defect control which is an important issue in the nanoimprint lithography were facilitated.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2000.10a
• /
• pp.153-157
• /
• 2000

This paper presents possible defects when welded blank hydroforming and focus on wrinkling, and the die design to prevent this defect An explicit finite element code, PAM-STAMP, is used to simulate welded blank hydroforming process. The numerical results are compared to the experimental results in the aspect of deformed shape. An automobile subframe is taken as an example to carry out finite element analysis.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.1
• /
• pp.10-17
• /
• 2012

This paper presents a clock regenerator using two $2^{nd}$ order ${\sum}-{\Delta}$ (sigma-delta) modulators for wide range of dividing ratio as defined in HDMI standard. The proposed circuit adopts a fractional-N frequency synthesis architecture for PLL-based clock regeneration. By converting the integer and decimal part of the N and CTS values in HDMI format and processing separately at two different ${\sum}-{\Delta}$ modulators, the proposed circuit covers a very wide range of the dividing ratio as HDMI standard. The circuit is fabricated using 0.18 ${\mu}m$ CMOS and shows 13 mW power consumption with an on-chip loop filter implementation.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2006.05a
• /
• pp.86-90
• /
• 2006

Nanoimprint lithography (NIL) is a novel method to fabricate nanometer scale patterns. It is a simple process with low cost, high throughput and high resolution. NIL process creates patterns by the mechanical deformation of imprint resist and physical contact process. This physical contact process causes the stiction between the resist and the stamp. Stiction becomes a key issue especially in the stamps including narrow pattern size and wide area during NIL process development. The antistiction layer coating using fluorocarbon is very effective to prevent this problem and ensure successful NIL. In this paper, the concept of antistiction coating is explained and different preparation methods for nanoimprinting are briefly discussed.

• The Korean Journal of Ecology
• /
• v.18 no.4
• /
• pp.525-531
• /
• 1995

The Korean government has recently announced its plan to establish the first National Museum of Natural History. However, the Korean word for natural history, jayonsa, is not a very familiar term to some academics as well as the general public. This article discusses the definition and history of natural history, describes the functions of natural history meseums, and makes suggestions to the establishment of our National Museum. Modern natural history is no longer an art of ‘stamp collecting’. It is a comprehensive scientific endeavor pursuing to enlighten the history of the planet Earth and the diversity of natural objects it contains. Natural history museum must have two museums within the museum: the outer museum for exhibition and general public education and the inner museum for research and specialist education. I hope that our National Museum of Natural History will be a place where we all get to know about Nature and thus to love her.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.4
• /
• pp.332-335
• /
• 2008

PMMA light guiding plate with nano pattern was fabricated by nano imprint lithography method. A silicon mold for electroplating of nickel was fabricated by conventional photolithography process. A nickel stamp for nano imprint lithography was fabricated by electroplating process using silicon mold. The nano imprint lithography was performed on PMMA plate at $140^{\circ}C$ under pressure of 20kN. The nano pattern on PMMA plate was investigated using FE-SEM. It is shown that the patterns were well transferred for several steps and the nano imprint lithography method could be applied for fabricating patterns of light guiding plate.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.162-167
• /
• 2006

Hot embossing lithography(HEL) has the production advantage of comparatively few process step, simple operation, a relatively low cost for embossing tools(Si), and high replication accuracy for small features. In this paper, we considered the nano-molding characteristic according to molding parameters(temperature, pressure, times, etc) and induced a optimal molding condition using HEL. High precision nano-patter master with various shapes were designed and manufactured using the DRIE(Deep Reactive ion Etching), LPCVD(Low Pressure Chemical Vapor Deposition) and thermal oxidation process, and we investigated the molding characteristic of DVD and Blu-ray nickel stamp. We induced flow behaviors of polymer, rheology by shapes and sizes of the pattern through various molding experiments. Finally, with achieving nano-structure molding with high aspect ratio, we will secure a basic technology about the molding of large-area nano-pattern media.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1997.03a
• /
• pp.165-170
• /
• 1997

The study presents an computer-aided analysis and its design for the forming process of $\Omega$-type bellows tube. Finite element analysis was carried out to perform the process simulation. Based on the analytic results of various conditions, the forming conditions used for angled U-type bellows tube were settled. The 3D modeling was constructed by I-DEAS and PAM-STAMP was used for process simulation. It is concluded that the spring back of formed bellows influences $\Omega$-shape and these results can be used for the process design.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.417-419
• /
• 2005

Five black-tailed prairie dogs showed weakness. emaciation and anemia during the lairage period in May 2005. Among them, one adult male and one female prairie dogs were found dead. The stamp smear for revealed a tremendous number of Giardia trophozoites. Histopathological examinations of the intestine showed slightly inflammatory changes and cystic enlargement of the crypts in the duodenal and jejunal mucous membranes. From these findings, this disease was diagnosed as giardiasis in black-tailed prairie dog.