• Corrosion Science and Technology
• /
• 제2권3호
• /
• pp.109-116
• /
• 2003

It is well known that SSCC (sulfide stress corrosion cracking) is caused by drastic ingression of hydrogen during the service and accumulation of hydrogen near the potential crack initiation site in the material. It is important to characterize the hydrogen trapping behavior to evaluate the service performance of the high strength pipeline steels. In this study. the relationship between the hydrogen trapping behavior and SSCC susceptibility is evaluated in terms of alloy composition, microstructure and carbide behavior. The hydrogen trapping behavior was measured by electrochemical hydrogen permeation test cell (Devanathan cell). The SSCC susceptibility is evaluated by constant extension rate test and constant strain lest method. The hydrogen trapping behavior is affected greatly by microstructure and nature of carbide particles. The fine TiC, and NbC in the matrix of ferritic structure acts as strong irreversible trap sites whereas the bainitic structure acts as reversible trap site. The SSCC susceptibility is closely related to not only the hydrogen trapping behavior but also the loading condition. As the activity of reversible trap site increases, SSCC susceptibility decreases under static loading condition below yield strength, whereas SSCC susceptibility increases under dynamic loading condition or above yield strength. As the activity of irreversible trap site increases. SSCC susceptibility increases regardless of loading condition. It is cased by the mixed effect of dislocation on hydrogen diffusion and trapping behavior.

• 기계저널
• /
• 제30권2호
• /
• pp.155-162
• /
• 1990

원유나 각종 석유 제품을 취급하는 구조물 또는 설비들의 부식 균열현상은 이미 오래 전부터 보 고되어 왔으며, 이는 주로 석유나 LPG 등에 포함되어 있는 H/SUB 2/S에 의한 황화물 응력부식 (SSCC:sulfide stress corrosion cracking)으로 널리 알려져 있다(1,2). SSCC에 의한 균열 현상은 일반 저강도 철강재에서는 발생하지 않으며 주로 항복강도가 500MPa 이상의 강재에서 많이 나타 난다. 특히, 구조물이나 설비제작 과정에서 반드시 있게되는 용접부는 SSCC에 아주 민감한 부분 으로써, 대부분의 SSCC 균열이 용접 열영향부(HAZ:heat affected zone)에서 나타나고 있다. 이는 용접부의 미세조직이 모재와 달라 국부적으로 높은 경도를 갖는 부분이 있기도 하고, 또한 운전 조건으로는 만족되지 않는 응력부식 조건이 용접 잔류응력에 의해 만족될 수 있기 때문이기도 하다. 본 글에서는 이러한 SSCC에 의한 균열 특성을 SSCC기구 (SSCC mechanism)와 함께 석유화학 설비재료로 많이 사용되는 철강재를 대상으로 고찰해 보고자 한다.

• Journal of Welding and Joining
• /
• 제32권5호
• /
• pp.1-6
• /
• 2014

This study aims at manufacturing SA welded API-X70 line-pipe with sour gas resistance. A pipe was manufactured by JCO bending process and SA welding using the API-X70 plate guaranteed HIC resistance. SA welded pipe was expanded in order to reduce the residual stress. The evaluation of a pipe for resistance to HIC and SSCC were performed by the RS D 0004 and RS D 0005 standards. For verification that a pipe has acceptable resistance to HIC, fullscale test was carried out. Results showed no cracking for the HIC and SSCC.

• Corrosion Science and Technology
• /
• 제3권4호
• /
• pp.154-160
• /
• 2004

The Sulfide Stress Corrosion Cracking (SSCC) resistance of structural steels is one of the critical concerns for the operators, material designers, and fabricators of oil-field equipment, especially treating sour gas (H2S) containing fluids. As far as its fabricators concerned, the systematic care of welding parameters should be taken to obtain comparable SSCC resistance of their weldment to that of its base material. In this respect, every different type of welding joint design for this use should be verified to be SSCC-proof with relevant test procedures. In this study, the welding parameters to secure a proper SSCC resistance of steel pipe's weldments were reviewed on the Welding Procedure Qualification Records (WPQR), which had been employed for actual fabrication of an offshore structure for oil and gas production. Based on this review, a guideline of welding parameters, such as, heat input, welding consumable for Y.S. 65 ksi class steel pipe material is proposed in terms of the NACE criteria for SSCC resistance.

• 대한두개안면성형외과학회지
• /
• 제23권2호
• /
• pp.77-82
• /
• 2022

Sarcomatoid squamous cell carcinoma (SSCC), a biphasic malignant tumor consisting of atypical squamous epithelial and mesenchymal elements mixed with epithelioid and spindle cells, is a variant of squamous cell carcinoma. Cutaneous SSCC is very rare and aggressive and has a poor prognosis. Here, we report a case of cutaneous SSCC with satellites and in-transit metastases. A 79-year-old woman presented with a protruding mass on the left temporal area sized 1.2×1.0 cm. The punch biopsy report indicated keratoacanthoma or well-differentiated squamous cell carcinoma. The size of the tumor increased to 2.7×2.0 cm after 8 days. An excisional biopsy was performed with a 2 mm safety margin. The tumor was identified as SSCC with a clear resection margin. Reoperation was performed thrice with an increased safety margin of 10 mm; however, the cancer recurred along with satellites and in-transit metastases. Chemoradiotherapy was administered; however, the size of the tumor increased along with satellites and in-transit metastases. The patient expired 162 days after the initial excision. Complete excision and immediate multidisciplinary approach should be combined during the early stages due to the aggressiveness and poor prognosis of cutaneous SSCC with satellites and in-transit metastasis.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2000년도 특별강연 및 추계학술발표대회 개요집
• /
• pp.198-200
• /
• 2000

• 한국지반공학회논문집
• /
• 제28권3호
• /
• pp.55-66
• /
• 2012

본 연구에서는 포항지역의 자연사면에서 채취된 이암풍화토(CL)의 흡입응력 이력현상을 조사하기 위하여 자동 흙-함수특성곡선(SWCC) 측정장치를 이용하여 건조 및 습윤과정에 따른 모관흡수력과 체적함수비를 측정하였다. 시료에 모관흡수력을 재하시켜 간극수를 유출시키는 건조과정과 반대로 모관흡수력을 제하시켜 간극수를 유입시키는 습윤과정을 재현하였다. 측정결과를 토대로 van Genuchten(1980)의 방법을 이용하여 흙-함수특성곡선(SWCC)을 산정한 결과 유효포화도에 따른 모관흡수력은 비선형적인 관계를 나타내며, 건조 및 습윤과정을 거치는 동안 동일한 유효포화도에서 다른 모관흡수력을 나타내는 이력현상(hysteresis)이 발생되었다. 그리고 Lu and Likos(2006)의 방법을 이용하여 흡입응력특성곡선(SSCC)을 산정한 결과 낮은 모관흡수력에서 흡입응력은 빠르게 증가하며 이후 미소하게 증가하는 것으로 나타났으며, 동일한 모관흡수력에서는 건조과정의 흡입응력이 습윤과정의 흡입응력보다 크게 나타내는 이력현상이 발생되었다. 따라서 불포화토의 특성을 고려하여 설계 및 안정성 검토를 수행하는 경우 강우침투시에는 습윤과정의 흡입응력특성곡선(SSCC)을 적용하고, 건조 혹은 배수시에는 건조과정의 흡입응력특성곡선(SSCC)을 적용하는 것이 바람직하다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.573-578
• /
• 2002

We carried out the feasibility study of super early self compacting concrete having the characteristics of 1 day demoulding without steam curing, high flowable concrete with self compacting, high strength and high durability etc. Here, We test and selected by several methods using high early cement with and without admixtures for the condition of super early strength self compacting concrete's manufacture (SSCC). We sucessed to meet at the goal of SSCC with 30∼35N/㎟ in 1 day, without steam curing and with slump flow about 60-65cm and suggest various concrete products to apply the developed SSCC for practical use in factory and in site place

• Corrosion Science and Technology
• /
• 제3권2호
• /
• pp.81-86
• /
• 2004

The sulfide stress corrosion cracking (SSCC) resistance of API X70 grade steel weldment has been studied using SSCC test in NACE TM-O177 method A. Also, microstructures and hardness distribution of weldment was investigated. The microstructure of SAW joint composed ferrite, pearlite and some MA constituent. Instead of hardening in CGHAZ, softening on the HAZ near base metal occurred. The low carbon TMCP type steel used for SAW showed softening behaviour in the HAZ adjacent to base metal, which was known to be closely related with the SOHIC (stress oriented hydrogen induced cracking). The SSC testing revealed that the API X70 SAW weld was suitable for sour service, satisfying the NACE requirements. By suppressing softening in the ICHAZ region, the SSCC resistance of low carbon TMCP steel welded joints could be more improved.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 봄 학술발표회 논문집
• /
• pp.79-84
• /
• 2002

We carried out the feasibility study of super early self compacting concrete having the characteristics of 1 day demoulding without steam curing, high flowable concrete with self compacting, high strength and high durability etc. Here, We test and selected by several methods using high early cement with and without admixtures for the condition of super early strength self compacting concrete's manufacture (SSCC). we sucessed to meet at the goal of SSCC with 20-35N/mm$^2$ at 1 day, without steam curing and with slump flow about 60-65cm. We continue to search the effectual conditions of SSCC's manufacture by changing mix designs, several of admixture (superplasticizer, stabilising agent), slag, fly ash, high early cement and apply the products for practical use.