• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 전력전자학술대회 논문집
• /
• pp.533-534
• /
• 2016

본 논문은 차량용 Built-in 청소기용 SRM(Switched Reluctance Motor) 드라이브 시스템 개발에 대하여 설명한다. 기존의 청소기용 모터는 대부분 영구자석을 사용하는 PMSM 또는 BLDCM이다. 그러나 영구자석의 주 원료인 희토류 광물가격의 상승으로 인해 영구자석형 모터를 대체할 비 희토류 모터(SRM)에 대한 관심이 커지고 있다. 본 논문에서는 제작된 차량용 Built-in 청소기용 SRM의 유한요소해석 데이터를 바탕으로 한 Matlab/Simulink 시뮬레이션 및 실제 실험을 통하여 가능성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.134-136
• /
• 2008

In recent years, the switched reluctance motor have been used many industrial application because of its cost advantage. SRM drivers are accomplished by switching the phase currents on and off synchronously with the rotor position which is fed back to the controller by position may deteriorate in harsh environments and increase the size and cost of the SRM drive system. This paper proposes a position sensorless method that is based on impressed pulse voltage using impressed at unenergised phases to estimate the rotor position. The current value by impressed pulse voltage compare with the threshold value. The rotor position can be estimated by observing the current value. Finally, simulation results compare with the sensor type SRM and confirm the proposed method to be useful.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.31-33
• /
• 1996

A SRM develops its torque according to the inductance variation as the rotor position and the phase current. The variation of the inductance and the phase current plays an important role in output characteristics. Predicting and calculating the inductance is invaluable in the study of SRM. This paper suggests the estimation method of inductance as variation of phase current and rotor position considering magnetic saturation of motor core. This method is also applied to full-pitched winding SRM.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(1)
• /
• pp.481-484
• /
• 2003

A strategy for a torque ripple reduction drive of single-phase SRM with high power factor is proposed. The drive for switched reluctance motor (SRM) is presented to achieve sinusoidal, near unity power factor input current with low torque ripple. The proposed SRM drive has no additional active switch. And a single-stage approach, which combines a DC link capacitor used as dc source and a drive used for driving the motor into one power stage, has a simple structure and low cost. The characteristics and validity of the proposed circuit is discussed in depth through the experimental results.

• Toxicological Research
• /
• 제32권2호
• /
• pp.95-102
• /
• 2016

In the recent years, noble nanoparticles have attracted and emerged in the field of biology, medicine and electronics due to their incredible applications. There were several methods have been used for synthesis of nanoparticles such as toxic chemicals and high energy physical procedures. To overcome these, biological method has been used for the synthesis of various metal nanoparticles. Among the nanoparticles, silver nanoparticles (AgNPs) have received much attention in various fields, such as antimicrobial activity, therapeutics, bio-molecular detection, silver nanocoated medical devices and optical receptor. Moreover, the biological approach, in particular the usage of natural organisms has offered a reliable, simple, nontoxic and environmental friendly method. Hence, the current article is focused on the biological synthesis of silver nanoparticles and their application in the biomedical field.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.61-65
• /
• 2002

SRM 토크는 인덕턴스 프로파일과 전류에 의해 발생한다. 발생한 SRM 토크는 전류제어시 turn-off 각을 제어함으로써 최대화 할 수 있고, 본 논문에서는 최소자승법을 이용하여 구한 함수를 통해 Turn-off 각을 제어할 수 있는 방안을 제안하였다. 시뮬레이션은 3상 6/4극 SRM을 대상으로 하였고, 제안한 방법에 의해 최대 평균토크가 됨을 시뮬레이션을 통해 증명하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.59-61
• /
• 2006

The single phase switched reluctance motor(SRM) is simpler in control circuit because the number of switching devices is fewer than the poly phase SRM. The energy density per unit volume is very big because all stator poles are excited simultaneously by a single switching power source. But it must be provided a starting device on account of not being generated the starting torque at specific rotor positions. And also it has some demerits that have a torque ripple, noise and vibration because of being excited by switching pulse power source. Therefore, to make up for these demerits, it is realized many studies for the structure design used by computer and the operating methods by power electronics technique. In this paper, we'll present the comparison of the single phase SRM with the various rotor pole face types, as like stepped rotor pole face type and general rotor pole face type. For the torque characteristics analysis.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.363-365
• /
• 1994

In switched reluctance motors(SRM), shaft position sensing is essential in order to synchronize the excitation pulse of a pertinent phase to the rotor position. This paper describes the operation of SRM drive using a simple position sensor of low cost. The position sensor is composed of a slotted disk similar to the rotor core shape of a prototype 6/4 SRM and three opto-interrupters disposed at an angle of 30 degrees. The phase current waveforms measured at several rotor speeds in experiment arc compared with those obtained through the computer simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.3-5
• /
• 1994

The SRM can be operated on the high speed range in which the back-emf is greater than the DC link voltage. However, the phase current of the SRM should be controlled through the selection of an exciting angle since it can not be controlled by a chop of the DC link voltage in the high speed range. In this paper, a PI and a bang-bang controller are employed in order to control the speed of the SRM and the leading angle of the SRM is adapted as a control input. The performances of two controllers are evaluated by computer simulation. The results show that the bang-bang controller is more attractive than the PI controller in the cost and performance aspects.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.531-532
• /
• 2011

본 논문에서는 세탁기의 DD Moter로 사용되고 있는 BLDCM을 대신하여 세탁기의 부하에 따른 세탁모드와 탈수모드의 특징에 만족시키는 외전형 SRM을 설계하였다. 이와 같은 특징을 고려하여 외전형 SRM의 극 조합으로 12/8, 18/12, 36/24 극에 대해 설계하고 유한요소해석법을 통해 외전형 SRM의 특성을 해석하였다. 본 논문에서는 세탁기용 전동기에 알맞은 구조로 18/12극이 적절한 것으로 평가되었다.