• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1998.11a
• /
• pp.37-40
• /
• 1998

(Ba.Sr)TiO$_3$(BST) ceramics were fabricated with different Ba/Sr ratios and the str dielectric properties of the BST bulk ceramics were investigated. As the Ba/sr ratios dielectric constant decreased. (Ba$_{0.7}$Sr$_{0.3}$)TiO$_3$ (BST(70/30)) showed a maximum dielec value of $\varepsilon$$_{r}$=8.856, this showed that the decrease of Ba/Sr ratios had made BST thin dielectrics. Targets were fabricated and made into film by PLD process and the thin film by PLD process have good stoichiometry with the targets.rgets.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1996.05c
• /
• pp.385-390
• /
• 1996

Cs는 AW500 에서 높은 분배계수 값(K$_{Cs}$>$10^3$$m\ell$/g)을 얻었으며 , Sr은 13X, 평형 용액의 pH=10의 조건에서 최대의 분배계수값(K$_{Sr}$~$10^4$$m\ell$/g)을 보였고, 평형용액의 pH 증가에 따라서 급격히 증가하는 경향을 보였다. 또한 AW500-Cs와 13X-Sr계는 고액비, 즉 V/m=40, 및 초기용액의 pH가 3 이상에서 최대의 분배계수 값을 얻었으며, 혼합제올라이트의 비(AW500/13X)가 1.5인 조건에서 Cs과 Sr을 효과적으로 동시에 분리할 수 있음 보았다. 그리고 1,10$0^{\circ}C$에서 배소한 AW500-Cs는 CsAlSi$_2$O$_{6}$로 재결정되며 , 13X-Sr은 SrAI$_2$Si$_2$O$_{8}$ 및 SiO$_2$상(phase)으로 재결정한다.

• Korean Journal of Crystallography
• /
• v.14 no.2
• /
• pp.73-78
• /
• 2003

(Ba/sub 1-x/Sr/sub x/)TiO₃ (BST, 0.4< x <0.65) single crystals were successfully grown by the TSSG (Top-Seeded Solution Growth) method, using a commercial [100] SrTiO₃ or as-grown [100] BST single crystals as seed crystals. To obtain the BST single crystals with various compositions x, the Ba/sr molar ratios in the solutions were systematically controlled while the Ti ion content among all cations was fixed at 67 mol%. A linear regression curve between their x values and the molar ratios of Sr/(Ba + Sr) in the solutions could be obtained, which in turn could used to select the initial composition to produce BST crystal with an aimed x value. In addition, the isothermal growth was found more effective for obtaining a compositional uniformity than a slow cooling process.

• Journal of the Korean Ceramic Society
• /
• v.37 no.6
• /
• pp.612-616
• /
• 2000

The effect of Co dopant on the (La, Sr)MnO3 cathode was investigated. La2Zr2O7 and SrZrO3 were formed as the reaction products between YSZ and LSMC. The reactivity of LSMC with YSZ increased with increasing Co content. However, the cathodic polarization resistance decreased with increasing Co doping. Therefore, doping Co at Mn site in the (La, Sr)MnO3 cathode was effective on controlling the polarization resistance of the cathode. The polarization property of LSMC-YSZ composite(60 wt%: 40 wt%) cathode was better than that of LSMC single cathode.

• Asian Pacific Journal of Cancer Prevention
• /
• v.13 no.8
• /
• pp.3561-3568
• /
• 2012

The calcium sensing receptor (CaSR) is a member of the largest family of cell surface receptors, the G protein-coupled receptors involved in calcium homeostasis. The role of the CaSR in neoplasia appears to be homeostatic; loss of normal CaSR-induced response to extracellular calcium is observed in cancers of the colon and ovary, while increased release of PTHrP is observed in cancers of the breast, prostate and Leydig cells. Currently CaSR can be considered as a molecule that can either promote or prevent tumor growth depending on the type of cancer. Therefore, recognition of the multifaceted role of CaSR in gliomas and other malignant tumors in general is fundamental to elucidating the mechanisms of tumor progression and the development of novel therapeutic agents. Emphasis should be placed on development of drug-targeting methods to modulate CaSR activity in cancer cells.

• Journal of the Korean Ceramic Society
• /
• v.23 no.1
• /
• pp.27-32
• /
• 1986

This study is aimed at synthsizing high dielectric material (Ba, Sr)$TiO_3$ through direct wet process. Pure and ultra fine particle of (Ba, Sr)$TiO_3$ Powder was synthesized from $BaCl_2$ $SrCl_2$ and TiCl4 aqeous solution at KOH Solution in the $N_2$ gas atmosphere. $BaCl_2$ $SrCl_2$ and TiCl4 were Mixed with the mole ratio of 1:9, 3:7:10, 5:5:10, 7:3:10, 9:1:10 and sythesized at 4$0^{\circ}C$~9$0^{\circ}C$ for 10min~15hrs. The particle size particle shape crystallinity and synthesis condition of (Ba, Sr)$TiO_3$ powder with the variation of temperature and reaction time in the aqueous solution studied by the exprimental instruments of DTA. TGA, X-ray diffratometer SEM.

• Journal of the Korean Ceramic Society
• /
• v.43 no.5 s.288
• /
• pp.284-292
• /
• 2006

$MgTiO_3{\cdot}CaTiO_3{\cdot}SrTiO_3$ system ceramics (MCST) were synthesized to study the effect of Ca addition amount and Sr substitution on temperature coefficient of resonance sequency. Temperature coefficient of resonance frequency was slightly increased by small amount ($i.e.{\sim}5%$) of Sr substitution. In case of 50% to 75% addition amount of $MgTiO_3$, decrease of quality factor was not observed with increasing dielectric constant.

• Journal of the Korean Ceramic Society
• /
• v.24 no.1
• /
• pp.17-22
• /
• 1987

This study is to detect the synthetic condition for the formation of Sr-Ferrite(SrFe12O19) by hydrothermally reaction. Mixed suspension of SrCl26H2O and FeCl3 6H2O were fixed on pH and were subjected to autoclavings at various temperature(150∼300$^{\circ}C$), reaction time(2hrs.∼48hrs.). The Sr-Ferrite powders were synthesized at 150$^{\circ}C$ for 36hrs, 200$^{\circ}C$ for 4hrs and 250$^{\circ}C$ for 2hrs. Synthesized powders were increased particle sizes at longer reaction time and higher reaction temperature. It has hexagonal ferrite M-type structure and has high purity of SrO.5.6 Fe2O3 composition.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.11a
• /
• pp.229-233
• /
• 2000

In this study, the temperature coefficient of resonant frequency($TCF_r$), dielectric and piezoelectric properties of $Pb_{1-x}Sr_x[(Sb_{1/2}Nb_{1/2})_{0.035}(Mn_{1/3}Nb_{2/3})_{0.065}(Zr_{0.49},Ti_{0.51})_{0.90}]O_3$ ceramics were investigated with the Sr substitution to Pb site. The dielectric constant was increased according to the increase of Sr substitution and electromechanical coupling factor($k_t$) also showed the highest values of 0.485 when the Sr substitution was 5 mol%. Moreover, the mechanical quality factor($Q_{mt}$) showed the highest value of 233 when the Sr substitution was 2 mol%.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.21 no.11
• /
• pp.1019-1023
• /
• 2008

Photoluminescence properties of $SrTiO_3$:Sm red phosphors synthesized by solid state reaction method were studied under 254 nm excitation. Emission bands at 576 nm and 616 nm in heavily $Sm^{3+}$ ion doped $SrTiO_3$:Sm phosphors were observed, which were attributed to $^4G_{5/2}\rightarrow{^6}H_{5/2}$ and $^4G_{5/2}\rightarrow{^6}H_{7/2}$ transition of $Sm^{3+}$, respectively. The $Sm^{3+}$ ion concentration exhibiting the maximum emission intensity in the $SrTiO_3$:Sm was 30 mol%. The luminescence caused by $Sm^{3+}$ in the $SrTiO_3$:Sm phosphors was interpreted by the energy transfer between $Sm^{3+}$ ions.