• Journal of Power System Engineering
• /
• v.13 no.3
• /
• pp.27-32
• /
• 2009

Numerical analysis information of a complex discharge-passage will be very useful to improve hydrogen compression system. General information about an internal gas flow is presented by numerical analysis approach. Relating with hydrogen compressing system, which have an important role in hydrogen energy utilization, this should be a useful tool to observe the flow quickly and clearly. Flow characteristic analysis, including pressure and turbulence kinetic energy distribution of hydrogen gas from cylinder going to the chamber of a reciprocating compressor are presented in this paper. Discharge-passage model is designed based on real model of hydrogen compressor. Pressure boundary conditions are applied considering the real condition of operating system. The result shows pressure and turbulence kinetic energy are not distributed uniformly along the passage of the hydrogen compressing system. Path line or particles tracks help to demonstrate flow characteristics inside the passage. The existence of vortices and flow direction can be precisely predicted. Based on this result, the design improvement should be done. Consequently, development of the better hydrogen compressing system will be achieved.

• The Journal of Asian Finance, Economics and Business
• /
• v.6 no.1
• /
• pp.169-175
• /
• 2019

Service quality has been a point of discussion from the decades as it is important for customer satisfaction, loyalty and retention. Various models have been proposed to measure the quality in the service sector. Models are modified in accordance with context and geography to assess the quality of service better. This study aims to investigate the impact of the modified e-SERVQUAL model on the customer perception about the existing relation and potential scope of doing business with a bank which in-turn will decide the performance of the bank. Statistical data was analyzed through various tests like reliability analysis, correlation and regression analysis using SPSS 25.0. The primary data of e-SQ and performance was gathered from 721 internet banking users using 32 item questionnaire, representing 72% response rates, of four selected Islamic banks of Malaysia. E-SERQUAL was modified by adding Shariah Compliance information about banks and products for Islamic banking customers. The finding specified that efficient & reliable services, fulfillment, security/trust, and Shariah compliance information have a significant association with the performance of Islamic banks. The research is original and its implications will be helpful for Islamic banks across the world to enhance the online experience of customers, which will help them to retain the customers in the rapid changing virtual environment.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.9
• /
• pp.91-100
• /
• 2021

Educational institutions play a critical role in national development through the advancement of skilled human resources and intellectual society. The number of higher educational institutions (HEIs) is increasing significantly in Bangladesh. Students have a number of options from which to select their preferred educational institutions. Hence, HEIs should think about the quality of services they provide to students. The objective of this study is to measure students' satisfaction and university reputation through service quality (SQ) in a private higher educational institution (PriHEI) in Bangladesh. Primary data was collected from 270 students of International Islamic University Chittagong (IIUC), Bangladesh, through a simple random sampling technique. In this study, data was analyzed through descriptive statistics, correlation, measurement model using confirmatory factor analyses, and structural equation modeling (SEM). The results showed that transport services have indirect but medical and physical facilities have both direct and indirect significant effects on overall students' satisfaction. Further, the administrative services and research facilities have significant indirect effects on overall students' satisfaction. Finally, the results of structural equation modeling (SEM) confirm that the reputation of the university is directly associated with overall students' satisfaction.

• International Journal of Computer Science & Network Security
• /
• v.23 no.10
• /
• pp.11-20
• /
• 2023

The primary aim of this study is to investigate the influence of Service Provider Quality (SPQ), System Quality (SQ), Information Quality (IQ), and Training Quality (TQ) on the interconnected aspect of organizational performance known as growth and development (GD). The study examined the influence of information systems (IS) on organisational performance and provided a theory-based technique for conducting research. The theoretical foundation for this study is derived from the widely employed [1]. IS success model in information systems research. The study's framework incorporates several novel elements, drawn from a comprehensive review of both recent and earlier literature, which researchers have utilized to evaluate the dimensions of [1]. In this study, we collected data from a diverse group of 348 individuals representing various industries through a web-based questionnaire. The collected data were subjected to analysis using SPSS. We conducted a multiple regression analysis involving 15 factors to assess several hypotheses regarding the relationship between the independent construct IS effectiveness and the dependent construct organizational performance. Several noteworthy descriptive statistics emerged, which hold significance for management. The study's findings strongly indicate that information systems exert a significant and beneficial influence on organizational performance. To sustain and continually enhance organizational effectiveness, the study recommends that managers periodically scrutinize and assess their information systems.

• Korean Journal of Ichthyology
• /
• v.20 no.2
• /
• pp.105-111
• /
• 2008

A pelagic tuna longline research cruise in the eastern and central Pacific Ocean from September to October of 2006 was conducted to compare catch rates with the use of different hook type and bait combinations. Traditional tuna hooks (J 4) and three circle hook types (C15, C16, C18), along with five bait types (chub mackerel (CM), jack mackerel (JM), milkfish (MF), sardine (SD), and squid (SQ)) and hook number as a proxy for hook depth were evaluated for their effect on bigeye tuna catch rates (fish per 1,000 hooks) using Generalized Linear Models (GLMs). Results from 28 sets indicated significant differences in bigeye catch rates between individual longline sets and hook number. The GLM explained 33% of the deviance in bigeye catch rates with these two factors. An alternative model formulation included bait type which had a small effect (explaining 2.7% of the deviance) on catch rates. Hook type had a negligible and non-significant effect in the GLMs. These results indicate that all of the hooks and baits tested are equally effective at catching bigeye tuna and that hook number (depth) was the paramount operational factor in explaining bigeye tuna catch rates.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.23 no.4
• /
• pp.234-252
• /
• 2020

This paper is to verify the effectiveness of 'Hybrid Disaster Management Strategy' that integrates 'RTM(Real-time Monitoring) based On-line' and 'UAV based Off-line' system. For landslide prone area where sensors were installed, the conventional way of risk management so far has entirely relied on RTM data collected from the field through the instrumentation devices. But it's not enough due to the limitation of'Pin-point sensor'which tend to provide with only the localized information where sensors have stayed fixed. It lacks, therefore, the whole picture to be grasped. In this paper, utilizing 'Digital Photogrammetry Software Pix4D', the possibility of inference for the deformation of ungauged area has been reviewed. For this purpose, actual measurement data from RTM were compared with the estimated value from 3D point cloud outcome by UAV, and the consequent results has shown very accurate in terms of RMSE.

• Korean Journal of Materials Research
• /
• v.13 no.3
• /
• pp.200-204
• /
• 2003

A statistical experiment method was employed to investigate the window of the thermal stability of $TiSi_2$films which are popular for Ti-salicide and ohmic layers. The statistical experimental results showed that the first order term of $TiSi_2$thickness and annealing temperature was acceptable as a function of $\Delta$resistivity by 95% reliability criteria, and R-sq value implying a fit accuracy of the model also showed a high value of 93.80%. We found that $\Delta$resistivity of the $TiSi_2$film annealed at $700^{\circ}C$ for 1 hr changed from 3.35 to $0.379\mu$$\Omega$$\cdot$cm with increasing thickness from 185 to $703\AA$, and TEX>$\Delta$resistivity of the $TiSi_2$film with a fixed thickness of 444 $\AA$ changed from 0.074 to 17.12 $\mu$$\Omega$$\cdot$cm with increasing temperature increase from 600 to $800^{\circ}C$. From these results, we report that the process conditions of$ 692^{\circ}C$-1 hr, $715^{\circ}C$-1 hr, and 73$0^{\circ}C$-1 hr for $TiSi_2$($400 \AA$) are stable by the criteria of 1, 2, and 3 $\mu$$\Omega$$\cdot$cm of $\Delta$resistivity, respectively.

• Current Photovoltaic Research
• /
• v.2 no.4
• /
• pp.173-176
• /
• 2014

We have investigated the seed layer formation of front side contact using the inkjet printing process. Conductive silver ink was printed on textured Si wafers with 80 nm thick $SiN_x$ anti reflection coating (ARC) layers and thickened by light induced plating (LIP). The inkjet printable sliver inks were specifically formulated for inkjet printing on these substrates. Also, a novel method to prepare nano-sized glass frits by the sol-gel process with particle sizes around 5 nm is presented. Furthermore, dispersion stability of the formulated ink was measured using a Turbiscan. By implementing these glass frits, it was found that a continuous and uniform seed layer with a line width of $40{\mu}m$ could be formed by a inkjet printing process. We also investigated the contact resistance between the front contact and emitter using the transfer length model (TLM). On an emitter with the sheet resistance of $60{\Omega}/sq$, a specific contact resistance (${\rho}_c$) below $10m{\Omega}{\cdot}cm^2$ could be achieved at a peak firing temperature around $700^{\circ}C$. In addition, the correlation between the contact resistance and interface microstructures were studied using scanning electron microscopy (SEM). We found that the added glass particles act as a very effective fire through agent, and Ag crystallites are formed along the interface glass layer.

• Journal of Intelligence and Information Systems
• /
• v.13 no.2
• /
• pp.15-26
• /
• 2007

In this study, a SOHO (Small Office Home Office) bankruptcy prediction model is proposed using Modified Bagging Predictors which is modification of traditional Bagging Predictors. There have been several studies on bankruptcy prediction for large and middle size companies. However, little studies have been done for SOHOs. In commercial banks, loan approval processes for SOHOs are usually less structured than those for large and middle size companies, and largely depend on partial information such as credit scores. In this study, we use a real SOHO loan approval data set of a Korean bank. First, decision tree induction techniques and artificial neural networks are applied to the data set, and the results are not satisfactory. Bagging Predictors which has been not previously applied for bankruptcy prediction and Modified Bagging Predictors which is proposed in this paper are applied to the data set. The experimental results show that Modified Bagging Predictors provides better performance than decision tree inductions techniques, artificial neural networks, and Bagging Predictors.

• The Bulletin of The Korean Astronomical Society
• /
• v.45 no.1
• /
• pp.45.2-46
• /
• 2020

Various processes, such as space weathering and granular convection, are occurring on asteroids' surfaces. Estimation of the surface exposure timescale is essential for understanding these processes. The Hayabusa mission target asteroid, (25143) Itokawa (Sq-type) is the only asteroid whose age is estimated from remote sensing observations as well as sample analyses in laboratories. There is, however, an unignorable discrepancy between the timescale derived from these different techniques. The ages estimated based on the solar flare track density and the weathered rim thickness of regolith samples range between 102 and 104 years [1][2]. On the contrary, the ages estimated from the crater size distributions and the spectra cover from 106 to 107 years [3][4]. It is important to notice that there is a common drawback of both age estimation methods. Since the evidence of regolith migration is found on the surface of Itokawa [5], the surficial particles would be rejuvenated by granular convection. At the same time, it is expected that the erasure of craters by regolith migration would affect the crater size distribution. We propose a new technique to estimate surface exposure age, focusing on the bright mottles on the large boulders. Our technique is less prone to the granular convection. These mottles are expected to be formed by impacts of mm to cm-sized interplanetary particles. Together with the well-known flux model of interplanetary dust particles (e.g., Grün, 1985 [6]), we have investigated the timescale to form such mottles before they become dark materials again by the space weathering. In this work, we used three AMICA (Asteroid Multi-band Imaging Camera) v-band images. These images were taken on 2005 November 12 during the close approach to the asteroid. As a result, we found the surface exposure timescales of these boulders are an order of 106 years. In this meeting, we will introduce our data analysis technique and evaluate the consistency among previous research for a better understanding of the evolution of this near-Earth asteroid.