• Journal of Radiation Protection and Research
• /
• v.44 no.4
• /
• pp.128-148
• /
• 2019

Massive environmental monitoring has been conducted continuously since the Fukushima Daiichi Nuclear Power accident in March of 2011 by different monitoring methods that have different features together with migration studies of radiocesium in diverse environments. These results have clarified the characteristics of radiological environments and their temporal change around the Fukushima site. At three months after the accident, multiple radionuclides including radiostrontium and plutonium were detected in many locations; and it was confirmed that radiocesium was most important from the viewpoint of long-term exposure. Radiation levels around the Fukushima site have decreased greatly over time. The decreasing trend was found to change variously according to local conditions. The air dose rates in environments related to human living have decreased faster than expected from radioactive decay by a factor of 2-3 on average; those in pure forest have decreased more closely to physical decay. The main causes of air dose rate reduction were judged to be radioactive decay, movement of radiocesium in vertical and horizontal directions, and decontamination. Land-use categories and human activities have significantly affected the reduction tendency. Difference in the air dose rate reduction trends can be explained qualitatively according to the knowledge obtained in radiocesium migration studies; whereas, the quantitative explanation for individual sites is an important future challenge. The ecological half-lives of air dose rates have been evaluated by several researchers, and a short-term half-life within 1 year was commonly observed in the studies. An empirical model for predicting air dose rate distribution was developed based on statistical analysis of an extensive car-borne survey dataset, which enabled the prediction with confidence intervals. Different types of contamination maps were integrated to better quantify the spatial data. The obtained data were used for extended studies such as for identifying the main reactor that caused the contamination of arbitrary regions and developing standard procedures for environmental measurement and sampling. Annual external exposure doses for residents who intended to return to their homes were estimated as within a few millisieverts. Different forms of environmental data and knowledge have been provided for wide spectrum of people. Diverse aspects of lessons learned from the Fukushima accident, including practical ones, must be passed on to future generations.

• Publications of The Korean Astronomical Society
• /
• v.30 no.1
• /
• pp.11-16
• /
• 2015

First light galaxies have predictable linear clustering, and are expected to produce fluctuations with a characteristic spatial power spectrum, which peaks at an angular scale of ~ 10 arcminutes and in the $1-2{\mu}m$ spectral regions. The Cosmic Infrared Background ExpeRiment 2 (CIBER2) is a dedicated sounding rocket mission for measuring the fluctuations in the extragalactic infrared background light, following up the previous successful measurements of CIBER1. With a 28.5 cm telescope accompanied with three arms of camera barrels and a dual broadband filter on each H2RG (${\lambda}_c=2.5{\mu}m$) array, CIBER2 can measure 6 bands of wide field ($1.1{\times}2.2$ degrees) up to 3 AB magnitudes deeper than CIBER1. This project is leaded by California Institute of Technology/Jet Propulsion Laboratory, collaborating internationally with Institute of Space and Astronautical Science in Japan, Korea Astronomy and Space Science Institute, Korea Basic Science Institute, and Seoul National University. The Korean team is in charge of 1) one H2RG scientific array, 2) ground station hardware and software, 3) telescope lenses, and 4) flight and test bed electronics fabrication. In this paper, we describe the detailed activities of the Korean participation as well as the current status of the CIBER2 project.

• Journal of the Korea Computer Graphics Society
• /
• v.26 no.1
• /
• pp.17-25
• /
• 2020

We present a novel multi-core CPU based parallel algorithm for the cell-connectivity information extraction algorithm, which is one of the preprocessing steps for volume rendering of unstructured grid data. We first check the synchronization issues when parallelizing the prior serial algorithm naively. Then, we propose a 3-step parallel algorithm that achieves high parallelization efficiency by removing synchronization in each step. Also, our 3-step algorithm improves the cache utilization efficiency by increasing the spatial locality for the duplicated triangle test process, which is the core operation of building cell-connectivity information. We further improve the efficiency of our parallel algorithm by employing a memory pool for each thread. To check the benefit of our approach, we implemented our method on a system consisting of two octa-core CPUs and measured the performance. As a result, our method shows continuous performance improvement as we add threads. Also, it achieves up to 82.9 times higher performance compared with the prior serial algorithm when we use thirty-two threads (sixteen physical cores). These results demonstrate the high parallelization efficiency and high cache utilization efficiency of our method. Also, it validates the suitability of our algorithm for large-scale unstructured data.

• Journal of the Korean Geographical Society
• /
• v.42 no.4
• /
• pp.506-525
• /
• 2007

Incision into bedrock channel is the primary control of landform evolution, but research into bedrock incision process stagnated for long time. Due to the scaling problem of the application of results from flume studies to bedrock channel, there is a strong need to simulate the bedrock incision process with more realistic models. As a part of investigation into controls of bedrock channel incision, three-dimensional changes of rock surface with abrasion was investigated with physical modelling. 18 rock plates were abraded with various sediment particle size and sediment load and abraded surfaces of the plates were scanned with high resolution 3-D scanner. To identify the spatial pattern of erosion of the rock plates, various methods were used. There was no synthetic or holistic method that showed all features of bedrock plate produced by abrasion, so each plate was analyzed using some available methods. Contour maps, shaded relief maps and profiles show that abrasion concentrated on the centre of plate (cross profile) and upstream and downstream edges (longitudinal profile) and eroded area extended inwards. It also found that the cracks and boundaries of forming materials easily eroded than other parts. Changing patterns of surface roughness were investigated with profiles, regression analysis and spectral analysis. Majority of plates showed decrease in small-scale roughness, but it depends on microstructures of the plates rather than general hardness or other factors. SEM inspection results supported this idea.

• Journal of the Korean Geographical Society
• /
• v.49 no.3
• /
• pp.371-389
• /
• 2014

This study aims to analyze the redistricting problems in non-autonomous Gu. Although non-autonomous Gu is a just local administrative district, it has been regarded as an important and basic spatial unit in electoral redistricting. By the reform of Public Official Election Act in 2012, however, non-autonomous Gu is distinguished from local governments like Si, Gun and autonomous Gu, in boundary delimitation for the 19th National Assembly election, and some are divided into a part of another constituency. About these background, this study points out the following problems. First, in national scale, the reform of Act made the malapportionment in constituencies of non-autonomous Gus, comparing with those of local governments. Second, there was the discriminative application of Act in each non-autonomous Gu and it will make the malapportionment worse in next election, considering the reorganization of local administrative system. Finally, this study propose that it is necessary to select one from a variety of redistricting principles, especially between the prevention of gerrymandering, the representativeness of local government and the apportionment, prior to another amendment of redistricting system and the debate about political reform.

• Journal of the Korean Geographical Society
• /
• v.48 no.4
• /
• pp.497-508
• /
• 2013

The objective of this study is to determine the spatiotemporal influences of climatic factors and atmospheric aerosol on phenological cycles of the Korea Peninsular on a regional scale. High temporal-resolution satellite data can overcome limitations of ground-based phenological studies with reasonable spatial resolution. Study results showed that phenological characteristics were similar among evergreen forest, deciduous forest, and grassland, while the inter-annual vegetation index amplitude of mixed forest was differentiated from the other forest types. Forest types with high VI amplitude reached their maximum VI values earlier, but this relationship was not observed within the same forest type. The phase of VI, or the peak time of greenness, was significantly influenced by air temperature. Aerosol optical thickness (AOT) time-series showed strong seasonal and inter-annual variations. Generally, aerosol concentrations were peaked during late spring and early summer. However, inter-annual AOT variations did not have significant relationships with those of VIs. Weak relationships between AOT amplitude and EVI amplitude only indicates that there would be potential impacts of aerosols on vegetation growth in the long run.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.121-129
• /
• 2008

In this paper, we present a fast analysis of multilayer microstrip fractal structure by using the fast multipole method (FMM). In the analysis, accurate spatial green's functions from the real-axis integration method(RAIM) are employed to solve the mixed potential integral equation(MPIE) with FMM algorithm. MoM's iteration and memory requirement is $O(N^2)$ in case of calculation using the green function. the problem is the unknown number N can be extremely large for calculation of large scale objects and high accuracy. To improve these problem is fast algorithm FMM. FMM use the addition theorem of green function. So, it reduce the complexity of a matrix-vector multiplication and reduce the cost of calculation to the order of $O(N^{1.5})$, The efficiency is proved from comparing calculation results of the moment method and Fast algorithm.

• Journal of the Economic Geographical Society of Korea
• /
• v.1 no.2
• /
• pp.85-102
• /
• 1998

The Changing Characteristics of Office Location in Central Seoul In recent years, central Seoul has been experiencing a dynamic transformation. In the process of reorganization of urban industrial structure including tertiarization and quaternarization of the economic base of Seoul, business services are growing very rapidly and large scale urban renewal projects are agilely implemented. Downtown office activities become a nucleus for economic performance of Seoul and high-rise office buildings steer the landscape transformation of central Seoul. Even though there appear to exist some evidences that office districts have dispersed to several subcenters, major office activities are still concentrated in the central Seoul. This paper redefines office industry in a narrow meaning comprising only relevant economic sectors and office buildings as office activity-functioning units. It then explores the industrial networking and territorial specialization of office activities focusing on the dual process of concentration and dispersion in Seoul. The changing characteristics of the downtown linkages of office activities in this post-industrial era transforms the spatial economy of central Seoul into more flexible and volatile, while territorial concentration of power and control functions are fortified at the same time. Finally, the paper addresses the development of manufacturing-tertiary-quaternary industrial complex, which can be regarded as new industrial clusters, selling cultural economy of urban space and possessing placeness or images for clients and customers, in relation to urban competitiveness and territorial specialization of large metropolitan areas.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.123-132
• /
• 1999

With the rapid increases of the amount of data and computing, the parallelization of the computing algorithm becomes necessary more than ever. However the parallelization had been conducted mostly in a super-computer until the rod 1990s, it was not for the general users due to the high price, the complexity of usage, and etc. A new concept for the parallel processing has been emerged in the form of K-clustering form the late 1990s, it becomes an excellent alternative for the applications need high computer power with a relative low cost although the installation and the usage are still difficult to the general users. The mapping algorithms (cut, join, resizing, warping, conversion from raster to vector and vice versa, etc) in GIS are well suited for the parallelization due to the characteristics of the data structure. If those algorithms are manipulated using PC-clustering, the result will be satisfiable in terms of cost and performance since they are processed in real flu with a low cos4 In this paper the tools and the libraries for the parallel processing and PC-clustering we introduced and how those tools and libraries are applied to mapping algorithms in GIS are showed. Parallel programs are developed for the mapping algorithms and the result of the experiments shows that the performance in most algorithms increases almost linearly according to the number of node.

• Journal of Korean Ophthalmic Optics Society
• /
• v.21 no.3
• /
• pp.173-179
• /
• 2016

Purpose: This study is to help assist in the management of optical shops by using the importance sequence of optical shop selection attributes, which is related to the consumer's selection method of consumer, and by using the importance sequence of optical shop information sources which is related to a route for optical shop selection. Methods: Customer surveys were conducted from March 10 to March 31, 2015 targeting customers who have visited an optical shop in Seoul and Northern Gyeonggi-do regions. The analys method was descriptive statistics and data were analyzed by utilizing SPSS v.10.0 statistical package program. Results: The highest ranking five attributes among the importance of optical shop selection are "friendliness and politeness of staff", "cleanliness of an optical shop", "quick resolution of customer's complaints by staff", "eyes examination and glasses dispensing skill of staff", "customer's complaints and claims handling". The lowest ranking five attributes among the importance of optical shop selection are "provide free gifts", "scale or size of an optical shop", "opening time and closing time", "convenient parking facilities", "favorable countenance of staff". The two highestr ranking criteria among the importance of optical shop information sources are "previous utilization experience", "recommendation by a relative, a friend and a family etc". The two lowest ranking criteria among the importance of optical shop information sources are "advertisement" and "spatial exterior view of optical shop". Conclusions: It is shown that the important thing in management of an optical shop is an inner caliber like ability of ophthalmic optician, interaction with customers, and previous utilization experience rather than external factors like advertisement, exterior view, and bonus gift.