• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.249-249
• /
• 2018

기존의 하천수사용량 자료의 계측은 하천수 사용자의 취수여건을 고려하여 유량계 외에 가동시간에 따른 환산유량 등의 간접적인 계측방법을 인정하고 있어 자료의 객관화가 어려운 실정이다. 이에 초음파 유속계를 활용하여 기존에 사용하는 간접적인 계측방법을 평가하고 적절한 환산식을 제공하기 위하여 시험유역을 선정하고 계측시설을 설치 및 운영하였다. 하천수 사용량 수집을 위한 시험유역은 만경강의 고산~봉동 수위관측소 구간과 영산호~영암호 구간 연락수로에 ADVM(Acoustic Doppler Velocity Meter) 초음파유속계를 설치하여 실시간 자동유량측정시설을 운영하였다. 만경강의 고산~봉동 수위관측소 구간은 양수장 1개소 및 취입보 3개소의 농업용수 사용과 취수장 1개소의 공업용수 사용이 활발하게 이루어지며, 구간 내 약 20개의 배수통문 및 배수통관 그리고 하천변을 따라 수지상으로 다수의 농수로가 존재하고 있어 하천유량 파악이 매우 어렵다. 또한 영산호 홍수조절을 위한 영산호와 영암호 배수갑문 연계 운영을 위해 영산호~영암호 구간의 연락수로 유입량을 파악이 필요하나 영산호와 영암호 배수갑문 운영 및 연락수로의 제수문 운영에 따라 연락수로 유입량 파악이 어렵다. 따라서 고산~봉동 수위관측소 구간은 2015년, 영산호~영암호 구간은 2017년부터 실시간 유량계측을 통해 유량자료를 측정하고 구간 내 하천수사용량을 파악하고 있다. 본 연구에서는 2017년 운영성과를 연구범위로 하였으며, 그 결과 기존에 파악이 어려운 유량자료를 직접적인 계측방법을 통해 자료를 객관화 할 수 있었으며 추가적인 물수지 분석을 통해 효율적인 하천유량관리가 가능할 것으로 기대하고 있다.

• Journal of Animal Science and Technology
• /
• v.63 no.2
• /
• pp.332-338
• /
• 2021

The objective of this study was to predict body compositions of live pigs using bioelectrical impedance procedures. In experiment 1, 32 crossbred (Duroc × Landrace × Yorkshire) finishing pigs with an average weight at 84.06 kg were used. In experiment 2, 96 crossbred (Duroc × Landrace × Yorkshire) finishing pigs with an average weight at 88.8 kg were used. A four-terminal body composition analyser was utilized to determine fat percentage. Lean meat percentage and backfat thickness were measured with a lean meat measuring meter. In experiment 1, fat percentage was not significantly correlated with lean meat percentage, although a tendency (p < 0.1) of a negative correlation was found. Backfat thickness was significantly correlated with fat percentage and lean meat percentage (r = 0.745 and r = -0.961, respectively). Coefficients of determination for fat percentage with lean meat percentage, fat percentage with backfat thickness, and backfat thickness with lean meat percentage were 0.503, 0.566, and 0.923, respectively. In experiment 2, fat percentage was significantly correlated with lean meat percentage (r = -0.972). Backfat thickness was also significantly correlated with fat percentage and lean meat percentage (r = 0.935 and r = -0.957, respectively). Results of this study indicate that bioelectrical impedance analysis might be useful for predicting body compositions of live finishing pigs.

• Journal of the Korean Wood Science and Technology
• /
• v.31 no.2
• /
• pp.16-23
• /
• 2003

The study was performed to obtain basic data for high quality timber production and efficient utilization of woods by investigating the effects of thinning on timber quality of domestic Korean pine(Pinus koraiensis Sieb. et Zucc.) planted. The results of this study were summarized as follows ; Comparing the appearance of knot per one meter on log surface, the heavy thinned trees contained less knots than non-thinned ones. And the ratio of dead knots was decreased in heavy thinned trees compared with the non-thinned ones, but the knot size was increased. The inclination angle of dead knot is larger than that of live knot. The crooked logs in heavy thinning plot appeared less than those in non-thinning plot. In heavy thinning plot, the log circle percentage of cross section and the ratio of clear lumber were increased, compared with in non-thinning one. The grade of log was the highest in heavy thinning plot.

• Imaging Science in Dentistry
• /
• v.52 no.3
• /
• pp.283-288
• /
• 2022

Purpose: This study was conducted to measure the radiation exposure and image quality of various cone-beam computed tomography (CBCT) machines under common clinical conditions and to analyze the correlation between them. Materials and Methods: Seven CBCT machines used frequently in clinical practice were selected. Because each machine has various sizes of fields of view (FOVs), 1 large FOV and 1 small FOV were selected for each machine. Radiation exposure was measured using a dose-area product (DAP) meter. The quality of the CBCT images was analyzed using 8 image quality parameters obtained using a dental volume tomography phantom. For statistical analysis, regression analysis using a generalized linear model was used. Results: Polymethyl-methacrylate (PMMA) noise and modulation transfer function (MTF) 10% showed statistically significant correlations with DAP values, presenting positive and negative correlations, respectively (P<0.05). Image quality parameters other than PMMA noise and MTF 10% did not demonstrate statistically significant correlations with DAP values. Conclusion: As radiation exposure and image quality are not proportionally related in clinically used equipment, it is necessary to evaluate and monitor radiation exposure and image quality separately.

• Economic and Environmental Geology
• /
• v.45 no.5
• /
• pp.487-502
• /
• 2012

This paper is focused on mineral compositions, microstructures and distributional characters of remained grains in the fault rocks collected from a fault developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using X-ray diffraction (XRD), optical microscope, laser grain size analysis and fractal dimension analysis methods. The exposed fault core zone is about 1.5 meter thick. On the average, the breccia zone is 1.2 meter and the gouge zone is 20cm thick, respectively. XRD results show that the breccia zone consists predominantly of rock-forming minerals including quartz and feldspar, but the gouge zone consists of abundant clay minerals such as chlorite, illite and kaolinite. Mineral vein, pyrite and altered minerals commonly observed in the fault rock support evidence of fault activity associated with hydrothermal alteration. Fractal dimensions based on box counting, image analysis and laser particle analysis suggest that mineral grains in the fault rock underwent fracturing process as well as abrasion that gave rise to diminution of grains during the fault activity. Fractal dimensions(D-values) calculated by three methods gradually increase from the breccia zone to the gouge zone which has commonly high D-values. There are no noticeable changes in D-values in the gouge zone with trend being constant. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. Mineral compositions in the fault zone and peculiar trends in grain distribution indicate that multiple fault activity had a considerable influence on the evolution of fault zones, together with hydrothermal alteration. Meanwhile, fractal dimension values(D) in the fault rock should be used with caution because there is possibility that different values are unexpectedly obtained depending on the measurement methods available even in the same sample.

• Journal of Korean Society of Disaster and Security
• /
• v.16 no.2
• /
• pp.15-32
• /
• 2023

There are some difficulties such as safety problem and need of manpower in measuring discharge by submerging the instruments because of many floating debris and very fast flow in the river during the flood season. As an alternative, microwave water surface current meters have been increasingly used these days, which are easy to measure the discharge in the field without contacting the water surface directly. But it is also hard to apply the method in the sudden and rapidly changing field conditions. Therefore, the estimation of the discharge using the surface velocity in flood conditions requires a theoretical and economical approach. In this study, the measurements from microwave water surface current meter and rating curve were collected and then analyzed by the discharge estimation method using the surface velocity. Generally, the measured and converted discharge are analyzed to be similar in all methods at a hydraulic radius of 3 m or over or a mean velocity of 2 ㎧ or more. Besides, the study computed the discharge by the index velocity method and the velocity profile method with the maximum surface velocity in the section where the maximum velocity occurs at the high water level range of the rating curve among the target locations. As a result, the mean relative error with the converted discharge was within 10%. That is, in flood season, the discharge estimation method using one maximum surface velocity measurement, index velocity method, and velocity profile method can be applied to develop high-level extrapolation, therefore, it is judged that the reliability for the range of extrapolation estimation could be improved. Therefore, the discharge estimation method using the surface velocity is expected to become a fast and efficient discharge measurement method during the flood season.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.39 no.7
• /
• pp.999-1004
• /
• 2010

This study was carried out to investigate the quality characteristics of ginseng Jung Kwa obtained by treatments with different sugars. Ginseng Jung Kwa was made with four different sugars (sucrose, glucose, honey and fructose). Chemical characteristic was measured by ginsenosides content and rheological characteristics were measured by rheometer and color meter. Total ginsenoside and Rf contents on Ginseng Jung Kwa by sucrose were highest at 10.0, and 7.82 mg/g, respectively. On ginseng Jung Kwa by fructose, total ginsenoside content was the lowest, and hardness and adhesiveness were the highest, and by honey, stiffness, cohesiveness, gumminess, chewiness, and springiness were the highest, and fracture force did not appear as a significant difference by treatment of different sugars. Coefficient of variance on ginseng Jung Kwa by honey was the highest. On ginseng Jung Kwa by sucrose, color (lightness, redness and yellowness) all were the highest. Browning on Jung Kwa by fructose was the greatest. Sensory evaluation preference analysis (color, taste, texture, flavor and overall acceptability) on ginseng Jung Kwa were determined by 50 panelists (30~50's age) using 5-point scale. On ginseng Jung Kwa by honey, texture and overall acceptability were the best. Ginseng Jung Kwa by fructose was very sticking and adhering, so preference by sensory evaluation was inferior to others.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.24 no.4
• /
• pp.492-500
• /
• 2014

Objectives: The purpose of this study is to estimate the applicability of regional sample collection of environmental samples. The concentration of asbestos fibers were analyzed with two devices. One was an existing commercial air sampling pump that has been proved to be accurate and exact, and the other is a remodeled pump for sample collection which was made from an electric bubble generator originally designed for aquarium fish. Samples were collected with the two devices under the same environmental conditions and collection equipment. A comparative analysis of the concentration of ambient asbestos fiber was then performed. Methods: Based on previous research, six farmhouses with asbestos fiber slate roofs known to have high concentrations of asbestos fiber were selected. Using the existing commercial air sampling pump and the remodeled electric bubble generator, four to seven samples were collected each day one meter downwind from the edge of the slate roof at high volume (about 4 L/min) and low volume (about 1.4 L/min). The analyzer responsible for sample quality control of asbestos fibers counted the number of asbestos fibers with a phase microscope. Results: The rates of flow change of the existed sampler and the remodeled pump at high volume were 0.82% and 0.17%, respectively. The rates of flow change at low volume were 3.83% and 1.09%, but there was not significant difference. The rates of flow change are within the error range (${\pm}5%$) of OSHA analyzing methods. For the high volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 6.270 fibers/L and for the remodeled one 5.527 fibers/L, not a significant difference. For the low volume sampler, the average asbestos fiber concentration in the air collected by the existed sampler is 7.755 fibers/L and for the remodeled one 7.706 fibers/L, not a significant difference. The total area of the slate roof of the targeted farmhouse has an effect on the concentration of asbestos fibers in the air from the existing pump and the remodeled one (p<0.01). Conclusions: The sampling function between the existing commercial pump and the remodeled one shows little difference. Therefore, the remodeled pump is considered a pump with a good availability for collecting ambient air asbestos samples.

• Horticultural Science & Technology
• /
• v.32 no.1
• /
• pp.84-90
• /
• 2014

Berchemia racemosa var. magna is only found in Anmyeon Island of South Korea. Genetic diversity and the spatial genetic structure of B. racemosa var. magna in Anmyeon Island were studied by I-SSR marker system. Fifty I-SSR amplicons were produced from 8 selected primers. We used 13 polymorphic markers to analyze the genetic structure. Distribution of 39 individuals in the study plot($90m{\times}70m$) showed aggregate pattern (aggregation index = 0.706). Total 21 genets were observed from 39 individuals through I-SSR genotyping. Proportion of distinguishable genotype (G/N), genotype diversity (D) and genotype evenness (E) were 53.8%, 0.966 and 0.946, respectively. In spite of the small number and the narrow distribution, Shannon's diversity index (I = 0.598) was relatively high as compared with those of the other plant species. For ex situ genetic conservation of B. racemosa var. magna, the sampling strategy based on spatial autocorrelation using Tanimoto distance is efficient at choosing the conserved individuals with a 6 meter interval between individual trees.

• Korean Journal of Remote Sensing
• /
• v.31 no.3
• /
• pp.227-244
• /
• 2015

Synthetic Aperture Radar is able to provide images of wide coverage in day, night, and all-weather conditions. Recently, as the SAR image resolution improves up to the sub-meter level, their applications are rapidly expanding accordingly. Especially there is a growing interest in the use of geographic information of high resolution SAR images and the change detection will be one of the most important technique for their applications. In this paper, an automatic threshold tracking and change detection algorithm is proposed applicable to high-resolution SAR images. To detect changes within SAR image, a reference image is generated using log-ratio operator and its amplitude distribution is estimated through K-S test. Assuming SAR image has a non-gaussian amplitude distribution, a generalized thresholding technique is applied using Kittler and Illingworth minimum-error estimation. Also, MoLC parametric estimation method is adopted to improve the algorithm performance on rough ground target. The implemented algorithm is tested and verified on the simulated SAR raw data. Then, it is applied to the spaceborne high-resolution SAR images taken by Cosmo-Skymed and KOMPSAT-5 and the performances are analyzed and compared.