Browse > Article
http://dx.doi.org/10.9719/EEG.2012.45.5.487

Mineral Composition and Grain Size Distribution of Fault Rock from Yangbuk-myeon, Gyeongju City, Korea  

Song, Su Jeong (Department of Geology, Kyungpook National University)
Choo, Chang Oh (Department of Geology, Kyungpook National University)
Chang, Chun-Joong (KHNP Central Research Institute, Korea Hydro & Nuclear Power Co., Ltd.)
Chang, Tae Woo (Department of Geology, Kyungpook National University)
Jang, Yun Deuk (Department of Geology, Kyungpook National University)
Publication Information
Economic and Environmental Geology / v.45, no.5, 2012 , pp. 487-502 More about this Journal
Abstract
This paper is focused on mineral compositions, microstructures and distributional characters of remained grains in the fault rocks collected from a fault developed in Yongdang-ri, Yangbuk-myeon, Gyeongju City, Korea, using X-ray diffraction (XRD), optical microscope, laser grain size analysis and fractal dimension analysis methods. The exposed fault core zone is about 1.5 meter thick. On the average, the breccia zone is 1.2 meter and the gouge zone is 20cm thick, respectively. XRD results show that the breccia zone consists predominantly of rock-forming minerals including quartz and feldspar, but the gouge zone consists of abundant clay minerals such as chlorite, illite and kaolinite. Mineral vein, pyrite and altered minerals commonly observed in the fault rock support evidence of fault activity associated with hydrothermal alteration. Fractal dimensions based on box counting, image analysis and laser particle analysis suggest that mineral grains in the fault rock underwent fracturing process as well as abrasion that gave rise to diminution of grains during the fault activity. Fractal dimensions(D-values) calculated by three methods gradually increase from the breccia zone to the gouge zone which has commonly high D-values. There are no noticeable changes in D-values in the gouge zone with trend being constant. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. It means that the bulk-crushing process of mineral grains in the breccia zone was predominant, whereas abrasion of mineral grains in the gouge zone took place by continuous fault activity. Mineral compositions in the fault zone and peculiar trends in grain distribution indicate that multiple fault activity had a considerable influence on the evolution of fault zones, together with hydrothermal alteration. Meanwhile, fractal dimension values(D) in the fault rock should be used with caution because there is possibility that different values are unexpectedly obtained depending on the measurement methods available even in the same sample.
Keywords
fault rock; fault gouge; fault mineral; fractal dimension; hydrothermal alteration;
Citations & Related Records
Times Cited By KSCI : 6  (Citation Analysis)
연도 인용수 순위
1 Billi, A. (2005) Grain size distribution and thickness of breccia and gouge zones from thin(<1m) strike-slip fault cores in limestone. J. Struct. Geol., v.27, p.1823- 1837.   DOI
2 Blenkinsop, T.G. (1991) Cataclasis and processes of particle size reduction. Pure Appl. Geophys., v.136, p.59-86.   DOI
3 Chang, T.W. (2001) Quaternary Tectonic Activity at the Eastern Block of the Ulsan Fault. J. Geol. Soc. Korea., v.37, p.431-444.
4 Chang, T.W. (2010) Fractals and Fragmentation of Survivor Grains within Gouge Zones along Boundary Faults in the Tertiary Waeup Basin. J. Eng. Geol., v.20, p.183-189.
5 Chang, T.W. and Chae, Y.J. (2004) Faulting and Hydrothermal Activity in the Gouge Zones of Quaternary Faults at the Eastern Block of the Ulsan Fault. J. Geol. Soc. Korea., v.40, p.469-479.
6 Chang, T.W., Chae, Y.J. and Choo, C.O. (2005a) Formation of Alteration Minerals in Gouges of Quaternary Faults at the Eastern Blocks of the Ulsan Fault, Southeastern Korea. J. Miner. Soc. Korea., v.18, p.205-214.
7 Chang, T.W., Chae, Y.J. and Choo, C.O. (2005b) Estimation of Volume Change and Fluid-Rock Ratio of Gouges in Quaternary Faults, the Eastern Blocks of the Ulsan Fault, Korea. J. Eng. Geol., v.15, p.349-363.   과학기술학회마을
8 Chang, T.W. and Choo, C.O. (1998) Formation Processes of Fault Gouges and their K-Ar Ages along the Dongnae Fault. J. Eng. Geol., v.8, p.175-188.
9 Chang, T.W. and Choo, C.O. (1999) Faulting Process and K-Ar Ages of Fault Gouges in the Yangsan Fault Zone. J. Korean Earth Sci. Soc., v.20, p.25-37.
10 Chang, T.W. and Jang, Y.D. (2008) The Widening of Fault Gouge Zone: An Example from Yangbuk-myeon, Gyeongju city, Korea. J. Eng. Geol., v.18, p.135-143.   과학기술학회마을
11 Choi, P.Y. (2005) Geometri Analysis of the Quaternary Eupchon Fault: an Interpretation of Trench Sections. J. Geol. Soc. Korea., v.41, p.129-140.
12 Goddard, J.V. and Evans, J.P. (1995) Chemical changes and fluid-rock interaction in faults of crystalline thrust sheets, northwestern Wyoming, U.S.A. J. Struct. Geol., v.17, p.533-547.   DOI   ScienceOn
13 Janssen, C., Laube, N., Bau, M. and Gray, D.R. (1998) Fluid regime in faulting deformation of the Waratah Fault Zone, Australia, as inferred from major and minor element analyses and stable isotopic signatures. Tectonophysics., v.294, p.109-130.   DOI   ScienceOn
14 Kee, W.S., Kim, B.C., Hwang, J.H., Song, K.Y. and Kihm, Y.H. (2007) Structural Characteristics of Quaternary reverse faulting on the Eupcheon Fault, SE Korea. J. Geol. Soc. Korea., v.43, p.311-333
15 Keulen, N., Heilbronner, R., Stunitz, H., Boullier, A.-M. and Ito, H. (2007) Grain size distributions of fault rocks: A comparison between experimentally and naturally deformed granitoids. J. Struct. Geol., v.29, p.1282-1300.   DOI
16 Kim, G.Y., Koh, Y.K., Choi, B.Y., Shin, S.H. and Kim, D.H. (2008) Geochemical Characteristics of the Gyeongju LILW Repository. Rock and Mineral. J. Korean Radioactive Waste Soc., v.6, p.307-324.
17 Kim, H.J. and Chang, T.W. (2009) Fracture Characteristics and Segmentation of Yangsan Fault around Mt. Namsan, Gyeingju City, Korea. J. Eng. Geol., v.19, p.51-61.
18 Kim, Y.S. and Jin, K.M. (2006) Estimated earthquake magnitude from the Yugye Fault displacement on a trench section in Pohang, SE Korea. J. Geol. Soc. Korea., v.42, p.79-94.
19 Rawling, G. and Goodwin, L.B. (2003) Cataclasis and particulate flow in faulted, poorly lithified sediments. J. Struct. Geol., v.25, p.317-331.   DOI   ScienceOn
20 Kyung, J.B. (2010) Paleoseismological Study and Evaluation of Maximum Earthquake Magnitude along the Yangsan and Ulsan Fault Zones in the Southeastern Part of Korea. Jigu-Mulli-Wa-Mulli-Tamsa., v.13, p.187- 197
21 Ryoo, C.R. (2009) A report for the Quaternary Gaegok 6 Fault Developed in the Mid-eastern Part of Ulsan Fault Zone, Korea. Econ. Environ. Geol., v.42, p.635- 643.
22 Ryoo, C.R., Lee, B.J., Son, M., Lee, Y.H., Choi, S.J. and Chwae, U.C. (2002) Quaternary faults in Gaegok-ri, Oedong-eup, Gyeongju, Korea. J. Geol. Soc. Korea., v.38, p.309-323.   과학기술학회마을
23 Shon, S.W., Chang, T.W. and Kim, Y.K. (2002) Mineralogy and Geochemistry of Quaternary Fault Gouges in the Southeastern Korean Peninsula. J. Miner. Soc. Korea., v.15, p.85-94.   과학기술학회마을
24 Sibson, R.H. (1987) Earthquake rupturing as a mineralizing agent in hydrothermal system. Geology., v.15, p.701-704.   DOI
25 Sibson, R.H., Moore, J.M. and Rankin, A.H. (1975) Seismic pumping a hydrothermal fluid transport mechanism. J. Geol. Soc. Am., v.131, p.653-659.   DOI
26 Storti, F., Billi, A. and Salvini, F. (2003) Particle size distributions in natural carbonate fault rocks : insights for non-self-similar cataclasis. Earth Planet. Sci. Lett., v.206, p.173-186.   DOI
27 Wibberley, C. (1999) Are feldspar-to-mica reactions necessarily reaction-softening processes in fault zones?. J. Struct. Geol., v.21, p.1219-1227.   DOI   ScienceOn