• Journal of Korean Academy of Dental Administration
• /
• v.7 no.1
• /
• pp.21-28
• /
• 2019

The purpose of this study was to investigate the association between wrong postures and pain during scaling and encourage dental hygienists and students to exercise scaling in a good position. After obtaining informed consent, 107 students (3rd and 4th grade students) who had an experience with scaling practice were enrolled. The questionnaire included three general items, four items related to the posture during scaling, and nine items related to pain management (total 16 items), for which the five-point Likert scale was used. Through the questionnaire, we examined the preference of posture during scaling, posture education during scaling, pain in each part during scaling, pain management, and pain management method. In the scaling exercise, 86.3% of the subjects were instructed on the correct posture, and 87.9% of the subjects perceived the possibility of inducing musculoskeletal disorders based on the scaling posture. The percentage of subjects who responded that they performed scaling in the correct posture was 33.6% and that of subjects who answered that they bowed or turned their head by more than 15° was 64.4%. Further, 45.7% of the subjects answered that they bent their shoulders, and 29.9% of the subjects answered that their postures were not parallel to the floor. Pain during scaling was still higher when they bent their head, they bent their waist, and they bent their wrist (p<0.05). During scaling, pain was most frequent in the fingers and hands (15%), followed by the neck (14%), shoulders (11.2%), waist (9.3%), and feet and legs (2.8%). The percentage of subjects who performed regular exercise (or stretching) to prevent pain was 29.9% and that of subjects who managed pain after scaling was 12.1%. Further, exercise (24.6%) and self-massage (20.3%) were highly used as the pain management methods, and the school practice was preferred to education media for pain management (79.4%). In the scaling practice, there was a training on pain management, but the frequency of practicing in the wrong posture was high. Moreover, pain increased upon practicing in an incorrect posture. Therefore, more in-depth and systematic education on the necessity and method of musculoskeletal disease management during scaling is required.

• Therapeutic Science for Rehabilitation
• /
• v.10 no.3
• /
• pp.137-149
• /
• 2021

Objective : This study aimed to verify the effectiveness of ICT-Living Lab-based programs to promote the health of elderly residents in small and medium-sized cities, thus, providing basic data for solving the health and quality of life problems faced by modern society. Methods : The tow-month program included 14 elderly individuals visiting senior center located in W City, from October to November 2019. The program was organized by consulting four senior experts and one ICT expert. The program consisted of 10 min for advance assessment, 10 min for preparation activities, 30 min for main activities, and 10 min for finishing, and 60 min for eight sessions over two months, once a week. Results : EQ-5D increased from 0.76 to 0.84, compared to pre-assessment(p=.009^*). EQ-VAS scores increased from 36.43 to 65.71 (p=.001^*). MMSE-DS increased from 21.21 to 24.14 (p=.000^*). SGDS-K decreased from 3.36 to 3.21, but this was not statistically significant (p=.854). Conclusion : The ICT·Living Lab-based program could be used as a basic material for future research as one of the ways to improve health and quality of life by preventing and addressing the problems faced by the elderly in modern society.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.324-330
• /
• 2021

In this study, the microbial levels on mixed vegetable salads, fresh fruits, and frozen fruits distributed in Korea were comparatively analyzed by food group, region, and quarter. Samples were collected from big markets in large cities from 2018 to 2019 and used for microbiological analysis. The levels of aerobic bacteria for mixed vegetable salads, fresh fruits, and frozen fruits were 6.48, 5.07, and 3.78 log CFU/g, respectively. As a result of analyzing the quarterly contamination levels of aerobic bacteria, the first quarter contamination level was 5.12 log CFU/g while the second quarter showed 6.26 log CFU/g, the third quarter 5.73 log CFU/g, and the fourth quarter 4.42 log CFU/g. A higher number of aerobic bacteria was observed in the second and third quarters when the temperature was higher. There was no difference in the number of bacteria by region. The levels of the coliform group were 1.98 - 3.93 log CFU/g in all samples, and Escherichia coli was detected at 1.38 log CFU/g in 3 out of 27 mixed vegetable salads. Since the mixed vegetable salad and fresh fruit used in this study exceeded the standard (3 log CFU/g) for unheated foods and E. coli was detected in three fresh fruits, stricter hygiene management in the manufacturing stage of salads and fresh fruit is required.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.338-347
• /
• 2021

In this paper, the beta-ray sensor circuit used in the true random number generator was designed using DB HiTek's 0.18㎛ CMOS process. The CSA circuit proposed a circuit having a function of selecting a PMOS feedback resistor and an NMOS feedback resistor, and a function of selecting a feedback capacitor of 50fF and 100fF. And for the pulse shaper circuit, a CR-RC2 pulse shaper circuit using a non-inverting amplifier was used. Since the OPAMP circuit used in this paper uses single power instead of dual power, we proposed a circuit in which the resistor of the CR circuit and one node of the capacitor of the RC circuit are connected to VCOM instead of GND. And since the output signal of the pulse shaper does not increase monotonically, even if the output signal of the comparator circuit generates multiple consecutive pulses, the monostable multivibrator circuit is used to prevent signal distortion. In addition, the CSA input terminal, VIN, and the beta-ray sensor output terminal are placed on the top and bottom of the silicon chip to reduce capacitive coupling noise between PCB traces.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.2
• /
• pp.168-174
• /
• 2022

In case of gingival recession or bone defect in maxillary anterior implant treatment, it is not easy to obtain satisfactory clinical results. In this case, loss of the labial alveolar plate was diagnosed in the maxillary right central incisor, so after tooth extraction, soft tissue was secured and implant placement with bone graft was planned. In addition, digital guide surgery was performed for the ideal implant position, and GBR (Guided Bone Regeneration) was accompanied with the xenogeneic bone and the autologous bone collected from the mandibular ramus since alveolar bone defects were extensive. After a sufficient period of osseointegration of the implant, a temporary prosthesis was fabricated through secondary stage surgery and impression taking, and through periodic external adjustment, the shape of soft tissue was improved. In the final prosthesis fabrication, a color tone of natural teeth was induced by an gold anodized customized abutment, and an aesthetic and functional zirconia prosthesis with reproducing the shape of the temporary prosthesis through intraoral scan was delivered.

• Clean Technology
• /
• v.28 no.1
• /
• pp.18-23
• /
• 2022

Using air as an insulator due to its low heat transfer coefficient has been studied and has been widely commercialized to save energy in the field of thermal insulation technology. In this study, we analyzed the heat insulating effect of hollow silica nanoparticles mixed in non-uniform size, and the maximum heat insulating efficiency of these particles given the limited number of particles that can be mixed with a medium such as paint. The hollow silica nanoparticles were synthesized via a sol-gel process using a polystyrene template in order to produce an air layer inside of the particles. After synthesis, the particles were analyzed for their insulation effect according to the size of the air layer by adding 5 wt % of the particles to paint and investigating the thermal insulation performance by a heat transfer experiment. When mixing the particles with white paint, the insulation efficiency was 15% or higher. Furthermore, the large particles, which had a large internal air layer, showed a 5% higher insulation performance than the small particles. By observing the difference in the insulation effect according to the internal air layer size of hollow silica nanoparticles, this research suggests that when using hollow particles as a paint additive, the particle size needs to be considered in order to maximize the air layer in the paint.

• The Journal of the Convergence on Culture Technology
• /
• v.8 no.2
• /
• pp.37-46
• /
• 2022

Recently, our society and environment has changed rapidly due to the pandemic caused by the COVID-19 virus. In this rapidly changing environment, companies fulfill their social responsibilities and require non-financial elements of transparent management activities. ESG has become one of the non-financial factors, and interest of ESG management is increasing worldwide. In this paper, we examine the importance of ESG concept and ESG management performance and the correlation with companies, and examine the necessity of ESG management for companies in the future. The literature reviews are conducted on CU which is currently best practicing ESG management through various secondary data. Also, we used interview articles so that reflect the rich voice of the distribution industry. In addition, after examining ESG characteristics through examples of global companies, we looked at BGF Retail's CU convenience store ESG activities, which is a leader in ESG management, in distribution industry. CU was divided into all sectors of E, S, and G, and all sectors were actively engaged in activities and flexibly coping with changing environments and social needs. In particular, it was confirmed that CU's environmental management, which focuses the most, achieved successful results due to the increase in actual consumption of customers. ESG management activities at CU convenience stores are currently ongoing and future tasks. As a leading company in ESG management in the current industry, it is meaningful to understand the process of growing into a company that shares concerns, efforts, and practical activities and fulfills social responsibility. Through this study, the changes and growth of CU and domestic companies to ESG and sustainable management are expected in the futures.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.377-388
• /
• 2022

Metaverse, realistic virtual space technology has become a hot topic. However, due to the lack of an institutional system to the metaverse environment, concerns are rising over the leakage of industrial confidentiality, including digital assets produced, stored, processed, and transferred within the metaverse. Digital forensics, a technology to defend against hacking attacks in cyberspace, cannot be used in metaverse space, and there is no basis for calculating the extent of damage and tracking responsibility, making it difficult to respond to human resources leakage and cyberhacking effectively. In this paper, we define the scope of industrial confidentiality information and leakage scenario and propose policy and institutional measures based on problems in each metaverse scenario. As a result of the study, it was necessary to prepare a standardized law on Extra-territorial search and seizure issues and a system for collecting cryptocurrency evidence to respond to industrial confidentiality leaks in the metaverse. The study expects to contribute to industrial technology development by preparing in advance for problems that may arise in metaverse technology.

• Journal of the Korea Society for Simulation
• /
• v.31 no.1
• /
• pp.1-9
• /
• 2022

As the automobile market has grown steadily in recent years, consumer expectations have also risen. Therefore, it is necessary for automobile sales offices to create innovative customer value that is different from the past. Auto sales offices are making efforts to select salespeople who fit their management strategies, but they are having difficulties in evaluating their actual internal capabilities. Therefore, in this paper, based on the study of Spencer & Spencer (2008), we reconstruct the core competencies required for salesperson selection, and analyze the core competencies required for today's automobile salespersons by deriving the hierarchical importance between those competencies using AHP analysis. As a result, it was possible to derive the importance of core competencies different from previous studies. This is believed to be mainly due to the modern social market, the characteristics of existing car salespeople, and the tendency of recent customers. This study showed that it is possible to set selection criteria according to the ease and importance of calculating the required competency through AHP analysis. In addition, if the existing research is based on job specifications, this study is different in that it analyzed the actual group of experts.

• Journal of the Korean School Mathematics Society
• /
• v.24 no.4
• /
• pp.327-348
• /
• 2021

This study examines the effects of mathematics learning mentoring activities on mathematical knowledge for teaching (MKT) of pre-service mathematics teachers. We choose six pre-service mathematics teachers in the department of mathematics education at M University. The pre-service mathematics teachers conducted 1:1 mathematics learning mentoring for two hours at a times and twice a week for 15 weeks. The pre-service mathematics teachers submitted the mentor log, which recorded weekly learning and emotional observations. We collected the mentor log and the reflection log of pre-service mathematics teachers and the interviews with pre-service mathematics teachers. Based on the collected data, we analyzed the effects of MKT, the understanding of students, and pre-service mathematics teachers' introspection by mathematics learning mentoring. We obtained conclusions as follows. First, mathematics learning mentoring provides an opportunity for pre-service mathematics teachers to apply the theory of mathematical education to schools. Thus pre-service mathematics teachers express theoretical knowledge as practical knowledge. Second, mathematics learning mentoring helps pre-service mathematics teachers have the ability to understand students and provide opportunities to reflect on their attitudes as learners. Third, mathematics learning mentoring helps advance teaching activities by providing pre-service mathematics teachers with opportunities to reflect on their teaching activities. Finally, mathematics learning mentoring has positively influenced the change in pre-service mathematics teachers' beliefs and teaching intuition.