• 한국재료학회지
• /
• 제26권3호
• /
• pp.136-142
• /
• 2016

To study the dispersion factors of silica sol prepared from fumed silica powder, we prepared silica sol under an aqueous system using a batch type bead mill. The dispersion properties of silica sol have a close relationship to dispersion factors such as pH, milling time and speed, the size and amount of zirconia beads, the solid content of fumed silica, and the shape and diameter of the milling impellers. Especially, the silica particles in silica sol were found to show dispersion stability on a pH value above 7, due to the electrostatic repulsion between the particles having a high zeta potential value. The shape and diameter of the impellers installed in the bead mill for the dispersion of fumed silica was very important in reducing the particle size of the aggregated silica. The median particle size ($D_{50}$) of silica sol obtained after milling was also optimized according to the variation of the size and amount of the zirconia beads that were used as the grinding medium, and according to the solid content of fumed silica. The dispersion properties of silica sol were investigated using zeta potential, turbiscan, particle size analyzer, and transmission electron microscopy.

• 멤브레인
• /
• 제11권3호
• /
• pp.124-132
• /
• 2001

고온에서 수소 분리 회수를 목적으로 silica/alumina 복합 막을 합성하였다. 막의 선택 투과 성능을 향상시키기 위해, sol-gel법에 의한 silica 및 alumina층을 중간층으로 도입하고, 그 위에 강제유동 CVD법에 의한 silica를 합성하였다. Sol-gel법에 의해 ${\alpha}$-alumina tube에 합성한 ${\gamma}$-alumina 및 silica 막은 Knudsen 확산 영역의 많은 mesopore를 포함하고 있어서 수소 선택 분리 막으로는 적합하지 못했다. 하지만, sol-gel법에 의해 합성한 silica/${\gamma}$-alumina층에 강제유동 CVD법으로 silica를 합성한 결과, 질소 투과 영역의 세공이 완전히 제거되어, 높은 수소 선택성을 가지는 복합 막이 형성되었다. 그 막은 온도에 따라 수소 투과 속도가 증가하여 $450^{\circ}C$에서 $5.57{\times}10^{-8}molm^2s^LPa^1$의 수소 투과 속도와, 9.52 kJ/mol의 활성화 에너지를 나타냈다. 분자체 효과에 의해 질소 투과가 완전히 배제되고, 수소만 선택적으로 투과되는 silica/alumina 복합막이 성공적으로 합성된다.

• 센서학회지
• /
• 제29권6호
• /
• pp.420-426
• /
• 2020

A metal oxide semiconductor gas sensor is operated by measuring the changes in resistance that occur on the surface of nanostructures for gas detection. ZnO, which is an n-type metal oxide semiconductor, is widely used as a gas sensor material owing to its high sensitivity. Various ZnO nanostructures in gas sensors have been studied with the aim of improving surface reactions. In the present study, the sol-gel and vapor phase growth techniques were used to fabricate nanostructures to improve the sensitivity, response, and recovery rate for gas sensing. The sol-gel method was used to synthesize SnO₂ nanoparticles, which were used as the seed layer. The nanoparticles size was controlled by regulating the process parameters of the solution, such as the pH of the solution, the type and amount of solvent. As a result, the SnO₂ seed layer suppressed the aggregation of the nanostructures, thereby interrupting gas diffusion. The ZnO nanostructures with a sol-gel processed SnO₂ seed layer had larger specific surface area and high sensitivity. The gas response and recovery rate were 1-7 min faster than the gas sensor without the sol-gel process. The gas response increased 4-24 times compared to that of the gas sensor without the sol-gel method.

• 상하수도학회지
• /
• 제13권3호
• /
• pp.101-106
• /
• 1999

This research aims to compare immobilized catalysts prepared by various methods and determine suitable $TiO_2$ catalyst for water purification. Sol-gel method by Anderson and powder coation method by Tanaka ate famous in the methods to immobilize catalyst. Therefore, the $TiO_2$ catalyst for this research was prepared by sol-gel method and powder coating method. Its structure was tested by X-ray diffractometer (XRD), Scanning electron microseope (SEM). Durability of a catalyst-support couple in an solution was investigated. too. Experimental results were summarized as following; i) Optimum ratio of Ti : $H_2O$ : $H^+$ to obtain stable sol was 1 : 10 : 0.1 and the XRD patterns of $TiO_2$ film immobilized by sol-gel method which were fired at $700^{\circ}C$ showed that the catalyst had an anatase structure. ii) The particle size of $TiO_2$ prepared by sol-gel method was less than $5{\mu}$, but it was observed that coated side was not unifiom. iii) Sol-gel method was very effective to obtain $TiO_2$ catalyst of thin film, but spreadability and durability of a catalyst-support couple in a solution were than $TiO_2$ film immobilized by powder coating method. iv) The particle size of $TiO_2$ immobilized by powder coating method was a little larger than it prepared by sol-gel method, but spreadability and uniformity of $TiO_2$ film and durability of a catalyst-support couple in a solution were better than it immobilized by sol-gel method.

• 산업진흥연구
• /
• 제9권2호
• /
• pp.137-151
• /
• 2024

본 연구는 고창 도솔산(兜率山) 선운사(禪雲寺) 입지에 대한 풍수적인 특징을 현장조사와 문헌고찰을 통해 형세론적 관점과 이기론 관점에서 분석한 연구이다. 풍수가 갖는 특징적인 요소는 자연과 조화를 최우선 하며 합리적인 방법을 통하여 입지선정의 기준점으로 삼았다. 신라시대 입당승들은 형세풍수가 처음 나타난 강서지역에 유학을 하였는데, 강서지법의 형세풍수가 우리나라에 유입되어 사찰의 입지선정과 가람배치에 주도적인 역할을 했다. 선운사는 도솔산 아래에 입지하여 그 의미가 클 수밖에 없었고, 부처님의 나라로 들어가는 도솔천(兜率川)과 도솔암(兜率庵)을 통한 불교적 완성을 이루고자 하는 바람의 실천이었다. 따라서 고창 도솔산(兜率山) 아래에 자리한 선운사 입지에는 다양한 풍수적 특징이 반영되었는데, 특히 도솔산 선운사의 입지에는 풍수가 가지고 있는 특징과 의미를 논리적으로 사용하였고, 불교의 가장 신성한 의미를 갖는 불교 교리와 사상 전파를 목적으로 하는 자연과 하나되는 모습을 실천하였다.

• 한국우주과학회:학술대회논문집(한국우주과학회보)
• /
• 한국우주과학회 2005년도 한국우주과학회보 제14권2호
• /
• pp.53-53
• /
• 2005

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2007년도 추계학술발표대회 및
• /
• pp.52.1-52.1
• /
• 2007

• 천문학회보
• /
• 제29권2호
• /
• pp.37.1-37.1
• /
• 2004

• 한국세라믹학회지
• /
• 제36권11호
• /
• pp.1274-1279
• /
• 1999

• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.150.2-150
• /
• 2002